It's not that easy to choose the right arduino wireless remote since there's a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top arduino wireless remote on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best arduino wireless remote on the marketbut dont skip to the end!
It’s not that easy to choose the right arduino wireless remote since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top arduino wireless remote on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best arduino wireless remote on the marketbut dont skip to the end!
Best arduino wireless remote
1. Solidremote 12V - 24V Secure Wireless RF Remote Control Relay Switch Universal 2-Channel 433MHz Receiver with 2 FCC ID Transmitters for Garage Door Openers, Cars, LED Lights & More (KIT-1)
Feature
SECURE # Rolling code key fob device offers better security and far more code combinations (more than 18 quintillion - 18 x 10^18 possibilities, nearly a trillion more than typical fixed code or so-called learning code ones) and built on new platform using higher RF sensitivity -111dBm superheterodyne module for better long range and more stable performance. Also 433Mhz frequency is less crowded than 315Mhz in USA.EASY & FLEXIBLE # Two independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as one channel for garage door controller unit, the other for entry lights. Easy programming & easy to use DIP switches working mode selection between pulse / momentary, hold / toggle and latching mode.
ENCLOSURE # Designed to work both indoor and outdoor, default enclosure supplied protects the inner radio receiver circuit board safe from rain or other tough weather, while customer can also use chemical glue or epoxy adhesive to seal the wiring holes after setup, providing IP55 equivalent waterproof protection level. Mounting holes are provided for easy installation to walls etc using screws.
INTERFACE # 3-Level efficient switching power supply system. Our 202U receiver board accepts 12 volts - 24 volts AC or DC wide supply voltage range (min. current rating is 110mA@12V DC). Each relay can switch up to 10A @14V DC or 10A @125V AC for resistive load (6A @14VDC for inductive load). Built-in small DC motor / solenoid polarity reversing control capability by using interlock latching mode and both relays.
APPLICATIONS # Used in anti-theft alarm control panels, home automation systems, short and long range turn devices on / off wirelessly, lifts, boats, marine, winches, motor-driven curtain, roller blinds, overhead garage door & gate barriers, motorcycles, vehicles, cars, truck, industrial and agricultural electrical control such as water pumps & sprayer, electric door release locks, windows, manual switches extender, LED lighting lamp bulbs and strips, entrance and access control etc.
2. INSMA 433Mhz Wireless RF Switch Long Range DC 12V 4CH Channel Wireless Remote Control Switch, DC12V Relay Receiver Module, Transmitter Toggle Switch RF Relay (2 Transmitter & 1 Receiver)
Feature
Long Range Signal can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance. Max range is up to 98ft/30m with no obstacle.4CH for More ControlAdjustable working way, control equipment turn/reverse, on/off. Switch Self-lock, Jog, Inter-lock.
Security ControlLearning code has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it.
Easy to UseExtremely easy to setup, learn, relearn and control(please refer to introduction). Stable and reliable performance, high receive sensitivity.
Wide ApplicationWIDE range of APPLICATIONS from simple domestic remote control to autonomous control such as, window, entrance, Garage Doors, alarm system, lifting equipment and so on. NOTE: Please email us if you meet any problem, we are always here to help, thanks!
Description
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.Output working way:
1. Self-lock: connect the JP1 with the cutting out cap.
2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3. Inter-lock: Connect the Jp2 with the Cutting out cap.
Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Using Instructions:
1. Press the learning code, the indicator flash, loosen finger, press any button of the remote control, the indicator flash 2 times and off, it means learning successfully.
2. It can learn various chips with the different code wireless remote control.
3. Remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means that it has been removed.
Receiver:
Size: 7.2 x 5.2 x 2.6cm
1. Working voltage: DC12V
2. Quiescent condition: Less than 6mA
3. Working temperature: -40 Degree +80 Degree
4. Receiver sensitivity: more than -105dBm
5. Working frequency: 433mhz
6. Output voltage: DC and AC is optional
7. Output current: Less than 3A
8. Max load current: 10A
Remote control transmitter:
Size: 5.8 x 3.9 x 1.4cm
1. Remote Distance: 328ft/100M
2. Operating Voltage: DC 12V
3. Frequency: 433mhz
4. Operating Current: 13 mAh
5. Code Type: Fixed code / Learning code
Package Included:
2 x Transmitters
1 x Receiver
1 x Manual
3. eMylo DC 12V 1CH 433Mhz RF Relay Smart Wireless Remote Control Light Switch Transmitter with One Relay Receiver (Interlocked Mode)
Feature
The RF remote relay adopts RF technology, with long remote control distance and stable signal.The receiving module provides high signal sensitivity at lower cost and resist interference for excellent stability.
The rf relay adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
The programmable rf transmitter and receivers can be flexibly configured in quantity and in operating modes.
It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.
4. 12V 10A One Channel Relay RF Wireless Remote Control 2 Receivers Momentary Switch
Feature
Material: durable PCB board and plastic.Encoding Wireless Transmitter Remote Control Switch
Easy to install and use. The wireless signal can pass through walls, floors and doors
Turn on or turn off the receiver with transmitter (remote control) from any place within a reliable distance
Suitable for lights, electrically operated doors, windows, curtains, etc.
5. BQLZR Inching/Self-Lock/Interlocked 12V 16Channel RF 433MHZ Wireless Relay Remote Control Switches Two 16-Key Transmitters & 4 Receiver
Feature
Sixteen Channels of output,the output can be independent.remote distance: 150m (Theoretical value)Using wireless encoding technique,no direction,no mutual interference
Can switch the working mode between inching(Factory Default), self-locking and interlocked
Mainly applied for: Remote control of the on and off of pump,machine-tool,LED lights and other civil and industrial supporting remote areas
6. QIACHIP 433Mhz Universal Wireless Remote Control Switch DC 12V 1CH Relay Receiver Module RF Transmitter (Transmitters 2 Button+ 2 Receiver 1CH)
Feature
433 Mhz Universal Wireless Remote: Input Voltage 12 V, Working Mode of Wireless 433mhz rf module receiver and transmitter RF are Superheterodyne .RF Switch DC: Transmitting distance: > 100 m ( open space), Only Support remote type: EV1527 learning code.
Wireless Relay 12v :Dimension of PCB:35 x 30 x 18 mm (L,W,H) ,Output terminal: NO , NC , COM.
It supports remotely and wirelessly control your Garage Door, Electronic Gates, Electrical Appliances and other telecommand equipments ,Electrical Appliances, Motorcycle Alarm, Car Sunroofs, Heating Systems, etc. Bringing you brand new experience of remote control, Please don't miss it.
Professional customer service ,Our on-line customer service and technical support ensure quick answers to your questions via email
7. Freenove Hexapod Robot Kit with Remote (Compatible with Arduino IDE Raspberry Pi OS), App Remote Control, Walking Crawling Twisting Servo STEM Project
Feature
This robot can crawl and twist like a creature. (Assembly required. Battery NOT contained.)Provides detailed tutorial -> Please find the download link on the product box. (No paper tutorial.)
Control methods -> Controlled wirelessly by remote (contained in this kit), your Android phone or tablet, iPhone and computer.
Provides support -> Provides free technical support to help you with any questions and problems.
Needs battery -> See "AboutBattery.pdf" in downloaded file to buy.
8. KOOBOOK 2Pcs Infrared IR Wireless Remote Control Sensor Module Kits for Arduino(Remote Control + Receiver Board)
Feature
Arduino suite by ultrathin Mini infrared wireless remote control infrared remote control and 38 KHZ infrared receiving module.The Mini ultra-thin has 17 function keys, the infrared emission furthest distance up to 8 meters.
Very suitable for indoor control devices of all kinds.
Infrared remote control receiving module can receive standard 38 KHZ modulation signals.
By means of programming the Arduino, the remote control signal decoding operation can be realized, which can produce all kinds of remote control robots and interactive work.
9. Freenove 4WD Car Kit (Compatible with Arduino IDE), Line Tracking, Obstacle Avoidance, Ultrasonic Sensor, Bluetooth IR Wireless Remote Control Servo
Feature
This car can work in different modes. (Assembly required. Battery NOT contained.) Overview video -> https://youtu.be/VLSJH5UFz1AProvides detailed tutorial (download needed, no paper tutorial) and complete code. Download link -> https://git.io/fjjf2
Control methods -> Controlled wirelessly by IR remote (contained), your Android devices and iPhone. (Note: RF remote is NOT contained. There is another kit containing it.)
Colorful Light -> There are 10 RGB LEDs with 16 million color that can be independently controlled on the car.
Needs battery -> See "AboutBattery.pdf" in downloaded file to buy.
10. DC 12V 4-Channel Wireless Remote Control Switch, MELIFE 315Mhz RF Switch 2 Transmitter & 1 Receiver for Garage Door Openers, Cars, LED Lights & More
Feature
RELIABLE & STABLE # The product adopts RF technology, with long remote control distance and stable signal. The integrated module features stable performance, making the product easy to use,strongly reliable and enduring.LONG RANGE # Signal can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance. Max range is up to 328ft/100m with no obstacle.
EASY & FLEXIBLE # Two independent relay channels can either work together (in latching) for polarity reversing or individually ( in pulse / hold ) to control different electronics, such as one channel for garage door controller unit, the other for entry lights. Easy programming & easy to use DIP switches working mode selection between pulse / momentary, hold / toggle and latching mode.
ENCLOSURE # Designed to work both indoor and outdoor, default enclosure supplied protects the inner radio receiver circuit board safe from rain or other tough weather, while customer can also use chemical glue or epoxy adhesive to seal the wiring holes after setup, providing IP55 equivalent waterproof protection level.
APPLICATIONS # It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.