It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 saw track bora. Its followed by an in-depth review of each saw track bora. Hopefully, once you are done reading this article, you will be well informed about saw track bora and be able to select the right saw track bora for you without any hesitations.
It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 saw track bora. Its followed by an in-depth review of each saw track bora. Hopefully, once you are done reading this article, you will be well informed about saw track bora and be able to select the right saw track bora for you without any hesitations.
Best saw track bora
1. Kreg KMA2685 Rip-Cut Circular Saw Guide
Feature
Make rip cuts and crosscuts up to 24" wideCut multiple pieces to the same size with just one setup
Use the oversize edge guide for precise control throughout the cut
Eliminate need for marking, measuring, and layout lines
Take your saw to the material instead of having to take your material to the saw
Description
TURN AN ORDINARY CIRCULAR SAW INTO A PRECISION EDGE-GUIDED CUTTING TOOLGreat projects start with high-quality cuts, and you can make those cutsmore easily than you ever imaginedusing your circular saw plus the Rip-Cut Circular Saw Edge Guide.
The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you wantup to 24"using the built-in measuring scale, and then make your cut.
With a built-in measuring scale, you dont have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
The Rip-Cut is very easy to use. Simply mount your saw to the universal sledit accepts most left-blade or right-blade sawsand then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. Youll get straight, accurate, repeatable cuts easily every time.
2. Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 100 Inch Cutting Length (50" clamp edge + 50" extension)
Feature
GET IT STRAIGHT This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 100 inch length allows you to saw with precision and skillCONTRACTORS COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools
LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge
AS LONG AS YOU NEED Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, youll save time and eliminate waste due to crooked, uneven cuts
100 INCHES OF CUTTING - With your purchase you will receive a 50" Clamp and 50" Extension, connect the pieces together for 100 inches of straight cuts
3. Circular Saw Track (Circular Saw Track)
Feature
Rip, crosscut, and make angled cuts up to 50" Long in plywood, MDF, and panelsSimply align the guide Track with your marks to make accurate cuts
Hold track in place without clamps thanks to anti-slip guide strips
Prevent splintering with anti-chip strips that support material during the cut
Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,
4. Bora QuickCut Circular Saw Guide with Rail & Angle Assist; All-In-One Woodworking Tool | 530416
Feature
One tool, countless uses: the Bora QuickCut does the work of multiple tools, All with one useful saw guide. The multiple angles on this circular saw accessory eliminate the need for a miter saw or more complex jigs. Cut wood or soft metals with unrivaled precision at four preset angles: 22.5, 45, 60, and 90.Mark, measure, and cut with ease: save yourself the calculations of a typical tri-square with boras advanced cut guide. Measure perfectly flush angles for framing and crown molding, without doing the math. The ruler also features imperial and metric measurements.
Easy grip: The large, curved handle provides extra comfort and precision. With the QuickCut, you can get a firm hold on your circular saw without your edge guide slipping.
Durable: Boras QuickCut saw guide is made with strong aluminum extrusion and conveniently placed ruler marks. It's 16 inches long, with a 14-inch (35.5cm) guide rail for making long, straight cuts.
Bora Quality: Bora tool is a leader in innovative power tool accessories that make your jobs and projects run smoothly.
5. Bora Saw Plate The Easy To Use Saw Sled/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications & Measurements | 544006
Feature
Works with the Bora WTX Clamp edges and Bora NGX clamp edgesVersatile - Fits right- and left-handed circular saws
Improved Front fence minimizes side to side tool movement
New side stop allows you to replace the tool in exactly the same place, every time
Low profile front Clamps allow a greater range of placement
Friction fit cut indicator doesn't require tools to adjust or lock in place
Secure - 3 points of contact means your saw is held securely while cutting
Replaces Bora saw plate - 542006
6. Bora NGX Saw Plate Includes 55" Non-Chip Strip That Elimates Tear Out, Designed for Straight Cuts While Using The NGX Clamp Edge System, 544001
Feature
Fixed center molded channel reduces blade offset and guessworkSelf-adhesive non-chip strip attaches to the bottom of your NGX Clamp edge and reduces top edge tear-out for a smooth finish
Quick-release Clamps are adjustable so your saw goes on AND off the plate effortlessly
Aluminum guide rails position your saw accurately every time
7. Bora 100" NGX Clamp Edge | Straight Cut Guide For Circular Saws | 50" Clamp Edge & 50" Extension For 100" Cutting Length | 544100
Feature
Clamping end moves with handle for easy adjustability from one sideLocking handle grabs work surfaces for a secure grip that wont budge
Made of heavy-gauge, rigid aluminum for extreme durability
Use with circular saws, routers, Jig saws, and other portable power tools
Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors
8. Bora 50" NGX Clamp Edge Extension| Straight Cut Guide For Circular Saws | Add 50" To Your NGX Clamp Edge | 544060
Feature
Fits into NGX Clamp edge saw guide to increase length by 50 inchesEasily attached with included metal connectors
Made of heavy-gauge, rigid aluminum for extreme durability
9. Bora 50" NGX Clamp Edge, Straight Cut Guide For Circular Saws | 50" Cutting Length, 544050
Feature
Clamping end moves with handle for easy adjustability from one sideLocking handle grabs work surfaces for a secure grip that wont budge
Made of heavy-gauge, rigid aluminum for extreme durability
Easily increase length up to 100 in. By adding the Bora NGX 50-inch aluminum extension
Winner of the 2019 Pro Tool Innovation Award (PTIA) in the Track Rail category
10. Bora 5-Piece NGX Set Including 50-inch clamp edge, 50-inch clamp edge extension, Pro Saw Plate, Non-Chip Strip, Track Clamps, 544500
Feature
Includes: NGX 50-inch clamp edge, NGX 50-inch extension with connectors for 100-inches of cutting capacity, saw plate, two rolls of 55-inch non-chip strip, and a pair of track clampsSaw plate features fixed center molded channel helps reduce blade offset and guesswork
2 Rolls of 55-inch self-adhesive non-chip strip used for reducing top edge tear-out
Track clamps easily attach to the clamp edge so you can easily cut any angle