What are criterias of the best adjustable feet levelers heavy duty? It is not easy to find the answer. We spent many hours to analyst top 10 adjustable feet levelers heavy duty and find the best one for you. Let’s find more detail below.
Best adjustable feet levelers heavy duty
1. Rok Hardware 4 Pack Heavy Duty 8000 LB Capacity Adjustable Furniture Leg Leveler
Feature
Holds Up to 8000 Lbs Made of heavy duty steel with a 2000 Lb capacity Per leg levelerLeg Base Diameter: 1-1/4"
Leveler Total Height: 2-1/2"
Leveler Pin Length: 3 Inches
Rok Brand is sold exclusively by Rok Hardware. When you purchase a Rok Brand product, your satisfaction is guaranteed. The Rok name is a registered trademark of Rok, Inc
Description
Includes 4 levelersLipped mounting bracket works to lift and creates greater stability.
Each leveler has a load-bearing capacity of 2000 pounds.
Can be used inside or on exterior furniture.
Height adjustable on an 8 degree swivel base.
Pivoting steel base is capped in polyethylene for carpet and floor protection.
Base Diameter: 1-1/4"
Total Height: 2-1/2"
Color/Finish: Bright Zinc Plated
Pin Length: 3 Inches
Material: Steel
Note: Recess in the top of bolt makes adjustment easy under full load with an Allen wrench.
2. Anwenk Leveling Feet Heavy Duty Furniture Levelers Adjustable Table Leg Leveler w/Lock Nuts for Furniture,Table, Cabinets, Workbench,Shelving Units and More
Feature
Heavy Duty Leveling Feet- These are 4 heavy gauge, plated steel furniture legs that help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more.Versatile Threaded Legs- The leveling feet have heavy 3/8"-16 (10mm) dia shaft that adjusts height from 0" to 2-1/2". Free spinning foot design compensates for uneven/ irregular floors.Polyethylene cap protects floors and block moisture from getting to the foot.
L-Shaped Mounting Bracket- Ensures the cabinet load is carried by the leveler, Not the screws. The leg leveler has 7/16" wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability.
1320LBs Weight Support- Each leveling leg support 330LBs, 4 legs support total 1320LBs. These heavy duty leg levelers hold up almost all heavy furniture you may have,without worrying about its quality.
Hex Wrench for Easy Adjustment- 5mm hex wrench is included to allow micro adjustment on each leg until they are perfectly level to your desired height.Package includes 4x leveling feet, 16 Installation screws , 5mm hex wrench.
Description
Anwenk Heavy Duty Furniture Leveling Feet Leveler Legs w/Lock Nuts for Furniture, Cabinets, Workbench, Bookcase,Shelving Units- 4 PackThese heavy duty furniture leveling feet are made of heavy gauge, plated steel that hold up total 1320LBs weight load.They work perfectly for furniture table, cabinets, workbench, shelving units, bookcase and a lot more!
Versatile Furniture Leveling Feet:
-The L-shape mounting plate with 7/16" wide ledger allows the leveler to hook onto the bottom of the cabinet and carry the weight of the cabinet unlike standard levelers.
-Smart free-spinning feet compensates for irregular floors and allow to get furniture leveled. -Polyethylene cap protects floors as it keeps moisture away. -The legs levelers can adjust height from 0" ~2 1/2".
-Hex wrench allows micro adjustment on each leg until they are perfectly level.
Easy to Use:
The leveling feet are super easy to install. Just install the legs with the ledger under the bottom of the furniture using 16 screws. When you are able to reach the shaft below, use a pry bar to lift the cabinet and turn the shaft with your fingers. When access is limited, use the provided 5mm hex wrench to get micro adjustment until they are perfectly level to your desired height.
Package Includes: 4xheavy duty furniture leveling feet, 16 Installation screws , 5mm hex wrench
3. Furniture Levelers | Heavy Duty & Integrated High-Density Felt | Fully Threaded Adjustable Height 0.5" to 1.25" | Great Glide Pads for Home, Office, DIY, Restaurant, Caf | 12 Pack
Feature
STOP SPILLING DRINKS or PUTTING FOLDED UP CARDBOARD UNDER TABLE LEGS JUST TO HAVE A RELAXING MEAL! - Great way to quickly and easily level all types of furniture at Home, Office, School, Restaurant, or Caf. COMPACT DESIGN and SUBTLE FINISH will have people wondering if you bought a whole new furniture set.EASY INSTALLATION & UNIVERSAL FIT mean that you will have newly level furniture ready for use in no time! All hardware and detailed installation instructions included. 1/4"-20 Threaded levelers can be threaded into existing furniture sleeves OR included T-Nuts can be used for universal installation.
STRONG & STURDY COMMERCIAL QUALITY - These furniture levelers are the strongest on the market and 100% guaranteed to resist and bending or flexing under load. Made of 100% Solid Steel and Thick High-Density Felt. Sturdy 1" Foot Diameter and Fully adjustable from 0.5" to 1.25" for maximum support and adjustability.
BUILT-IN FLOOR PROTECTION - Mechanically fastened, pre-installed, thick felt floor protectors ensure that your hardwood floors stay in pristine condition. No more fussing with stick on pads - these levelers have integrated thick felt pads which will stay in place for years!
100% MONEY BACK GUARANTEE - Our customers are #1. If you are not 100% satisfied with your purchase, return it for a full refund with no questions asked!
Description
Stop spilling drinks or putting folded up cardboard under table legs just to have a relaxing meal! Grab a set of our Felt Furniture Levelers and have your home or office become the envy of your friends and family!
The COMPACT DESIGN and SUBTLE FINISH will have people wondering if you bought a whole new furniture set.
Our furniture levelers feature GENEROUS MAXIMUM HEIGHT and include COMMERCIAL GRADE HARDWARE + BUILT-IN FLOOR PROTECTION.
EASY INSTALLATION and UNIVERSAL FIT mean that you will have newly level furniture ready for use in no time! All of the high quality hardware you need is included along with detailed instructions which will guide you step-by-step from box opening to relaxing on your newly levelled furniture in front of the fire or the TV.
Reasons to order our Felt Furniture Levelers today:
- Become the envy of your friends and family by showing off your upgraded furniture!
- Backed by our 100% Money Back Guarantee!
- Proudly made with the highest quality materials and attention to detail.
- Commercial Grade and suitable for Home, Office, School, Restaurant, Caf.
- AMAZON PRIME eligible shipping means you will have them ASAP!
Click the Add to Cart Button NOW and we will ship them to you RIGHT AWAY!
4. D.H.S. Heavy Duty Leveler Legs w/ Lock Nuts - 600 Lb. Capacity per Leg - Adjusts from 0" to 2-1/2" - 4 Pcs.
Feature
HEAVY DUTY - Made from 14 ga. (.080") steel. Load capacity is 600 lbs. per legINTEGRAL LEDGER - Ensures that the load is carried by the leveler, not the screws
LOCK NUTS INCLUDED - An absolute MUST for the workshop or garage, especially if any vibrating machinery is involved.
FREE SPINNING FOOT - Compensates for irregular floors. Polyethylene cap protects floors as it keeps moisture away
YOU GET - 4 Legs, 16 Installation screws (#10 x 3/4"), 5mm hex wrench
Description
Got a 2,400 lb. workbench that needs leveling?... Read On!D.H.S. is pleased to offer a leveler that's tough as nails, but as easy to install as it is to adjust.
Real Steel
Housings are made from 14 ga. (.080"), zinc plated steel. Each has a 7/16" wide ledger that hooks under the cabinet. This ensures the load gets carried directly on the leveler, not the screws. BTW the screws we provide are no joke. They're 3/4" long #10 Philips head (nickel plated), perfect for supporting a bookcase with plywood sides or a workbench with 4 x 4 legs.
Versatile Threaded Leg
The legs have a 10mm dia. (a heavy 3/8") shaft that adjusts from 0" to 2-1/2". The feet are 1-1/4" dia. and spin freely on the threaded shaft. This allows them to tilt if your floor is really bad. Adjustments are easier too, as you won't be fighting the friction of the entire foot rubbing against the floor as it's being turned. Black polyethylene caps protect your floor and block any moisture from getting to the foot.
Lock Nuts Included
These are a MUST for the workshop or garage, especially if vibrating equipment is involved. Just level the piece out and then snug the nuts up against the bottom of the housing. BTW, these are 10mm lock nuts, which would have been quite expensive if you had to provide them yourself.
Installation
Could it be any easier? Just hook them onto the cabinet and attach with the provided screws. The whole thing could be done in 5 minutes (and that assumes you're taking it easy).
Adjustment
If you're able to reach below, it's easiest to just use a pry bar to lift the cabinet and turn the shaft with your fingers. If access is limited, use the provided 5mm hex wrench. An access hole can also be drilled in the cabinet floor to get the wrench through.
Here's what you get...
- 4 Heavy Duty Leg levelers
- 16 Pan head screws (#10 x 3/4")
- 5 mm Hex wrench
5. MCS280100-4 Heavy Duty Adjustable Leg Leveler Set
Feature
2200 LB Capacity (550 LB Each Leg)3/8"-16 Thread
Swivel Foot
Adjustable with 3/16" Hex Key
Includes 4 Levelers With Nylon Cover Cap and Screws
6. T-Nut Leg Leveler (Set of 4)
Feature
Set of 4 - 3" Leg Levelers with T-Nuts, Medium Duty, 3/8" - 16 thread, Mounting InstructionsHex Nut at the Base of the Leveler can be turned for Height Adjustment
Slot on the Top of the Leveler for Adjusting
Pivoting Base (1 1/2" wide) to Work on any Floor, with Plastic Glide Pad
3/8"-16 Thread Three Prong T-Nuts
Description
These levelers work great for a variety of applications. T-nut dimensions: Barrel diameter: 7/16" Barrel height: 3/8" Bottom diameter: 1" Prong height: 9/32". Dimensions may vary.7. Level-It - 1-7/8" Diameter Level Mount with 1/2-13 Threaded Stem
Feature
Capacity: 5,000 lbsZinc Plated Finish
Threaded Stem: 2" Long x 1/2"-13 UNC, 3/4" Hex Nut
Dimensions: 1-7/8" Diameter x 3-1/8" Tall
Perfect for building equipment
Description
Thanks to an ever-expanding offering and our fast delivery on custom configurations, Level-It is now the largest selling leveling mount in the market today. Manufactured in a variety of configurations, materials and finishes, these mounts are suitable for thousands of light, medium, and heavy-duty applications. Level-It mounts are available in stud or tapped versions with steel, stainless steel or FDA-friendly Delrin bases. Our standard mounts swivel 15 in all directions to give users optimum performance on uneven surfaces. One-piece studs are forged, roll threaded and then case-hardened for maximum strength and durability.8. Furniture Levelers | Furniture legs, Adjustable Furniture Feet, Inch Size, 3/8-16 Thread Size, 1.57" Base Diameter, 2.95 Thread Length, (4 Pack)
Feature
Specially designed for Heavy Weight Furnitures, cabinets and Machinery, 550lb. Capacity per leg. 2200lb. capacity for 4.Screw in threaded stem is 3/8"-1.5" threads and is one inch long.
HEAVY DUTY internel zinced plated 0.9inch fastner.
100% SATISFACTION GUARANTEE : If you don't love our Nico Leg levelers - please return for a 100% refund.
Description
High quality felt bottom adjustable leveler feet protects your floor surfaces while providing you the ability to adjust leg height to fix wobbly or uneven legs on chairs or furniture. Eliminate the wobble and protect your floor with a quiet sliding felt foot. Adjustable legs help when the floor is unlevel or sloping, you can adjust the furniture to sit level on uneven floors.
Threads on the screw are0.35inch 1.5 inch and can possibly be used as replacement feet in furniture since many manufacturers use that thread size.
However, if your existing thread is different or if there is no hole in the furniture then we include a 0.35inch 1.5 inchteeth prong nut that can be inserted into wood to create the proper screw hole.
ORDER YOUR NICO'S FURNITURES LEG LEVELERS NOW!!!
100% SATISFACTION GUARANTEE : If you don't love our Nico Leg levelers - please return for a 100% refund.
9. Heavy Duty Adjustable Furniture Leg Levelers, Small Foot Ideal for Tables, Shelving Units, Shop Cabinets and Furniture (4 Leveling Legs)
Feature
Ideal for tables, shelving units, cabinets, furniture legs and a whole lot more.The Heavy Duty Leg Levelers have an L-shaped mounting bracket made from a heavy gauge, plated steel that hook onto the bottom edge of you cabinet for better support and stability unlike standard levelers.
The large 1-1/2" diameter heavy duty polyethylene foot will protect your floor and block any moisture from getting to the foot. No more rust spots left on the floor surface.
The adjustable legs have a 10mm dia. (apx. 3/8") shaft that adjusts from 0" to 2" in height. Using all four levelers provides you with a load capacity of approximately 600 lbs.
Easy to adjust with the included Hex Key Wrench. The unique design of the leg leveler allows for easier access to the adjustment bolt. This allows you to micro adjust each leg until they are perfectly level to your desired height.
Description
Ideal for tables, shelving units, cabinets, furniture legs and a whole lot more. The Heavy Duty Leg Levelers have an L-shaped mounting bracket made from a heavy gauge, plated steel that hook onto the bottom edge of you cabinet for better support and stability than standard levelers. The large 1-1/2" diameter heavy duty polyethylene foot will protect your floor and block any moisture from getting to the foot. No more rust spots left on the floor surface. The adjustable legs have a 10mm dia. (apx. 3/8") shaft that adjusts from 0" to 2" in height. Using all four levelers provides you with a load capacity of approximately 600 lbs.10. Heavy Duty Adjustable Leg Leveling Glides for Furniture 12 Pack
Feature
Set of 12 - 1-1/2" leg levelers with t-nuts 5/16" - 16 threadHard Nylon Glide is kind to all types of floors including wood.
Easy to install. Drill a 7/16" hole, tap in T-nuts and screw in leveler to the height you desire.