When you looking for toggle anchors for drywall heavy duty, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable toggle anchors for drywall heavy duty is not an easy task. In this post, we show you how to find the right toggle anchors for drywall heavy duty along with our top-rated reviews. Please check out our suggestions to find the best toggle anchors for drywall heavy duty for you.
Best toggle anchors for drywall heavy duty
1. TOGGLER SNAPTOGGLE BB Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 100)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately)
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/4"-20 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength | Ultimate Shear Strength |
1/2" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 265 lb. | 241 lb. |
5/8" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 356 lb. | 324 lb. |
1/2" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 425 lb. | Not available |
5/8" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 464 lb. | Not available |
Concrete Block | 1/2" | 1/4"-20 UNC zinc-plated steel | 1,080 lb. | Not available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
2. TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 10)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 1/4"-20 UNC-threaded bolts
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 1/4"-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4"-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength | Ultimate Shear Strength |
1/2" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 265 lb. | 241 lb. |
5/8" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 356 lb. | 324 lb. |
1/2" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 425 lb. | Not available |
5/8" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 464 lb. | Not available |
Concrete Block | 1/2" | 1/4"-20 UNC zinc-plated steel | 1,080 lb. | Not available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (10) TOGGLER SNAPTOGGLE BB toggle anchors
- (10) 1/4"-20 UNC bolts
3. 12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 1/4"-20 UNC-threaded bolts
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt (included)
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
Mount anything!The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 1/4"-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4"-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
4. TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 10)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 3/16"-24 UNC-threaded bolts
Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength Values | Ultimate Shear Strength Values |
1/2" Drywall | 1/2" | 3/16"-24 UNC zinc-plated steel | 238 lb. | 247 lb. |
5/8" Drywall | 1/2" | 3/16"-24 UNC zinc-plated steel | 356 lb. | 298 lb. |
1/2" Drywall with 25 Gauge Stud* | 1/2" | 3/16"-24 UNC zinc-plated steel | 412 lb. | Not Available |
5/8" Drywall with 25 Gauge Stud* | 1/2" | 3/16"-24 UNC zinc-plated steel | 462 lb. | Not Available |
Concrete Block | 1/2" | 3/16"-24 UNC zinc-plated steel | 802 lb. | Not Available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (10) TOGGLER SNAPTOGGLE BA toggle anchors
- (10) 3/16"-24 UNC bolts
5. Heavy Duty Self-drilling Zinc Toggle Drywall Anchors with Screws Kit, 50 Pieces
Feature
No messy pre-drilling, No difficult pre-assembly, Fewer installation stepsVersatility for multiple applications - hangs up to 85 pounds
Simple, easy installation, especially when compared to ordinary toggle bolts
Superior one-piece construction prevents losing pieces behind wall
Kit Includes 25 Toggle anchors, 25 Phillip Screws #8 x 2-1/8" and a Plastic Case
6. Ansoon Zinc Self Drilling Drywall Hollow-Wall Anchors with Screws Kit, 200 Pieces All Together
Feature
Anchors pre-drills precise hole in types of drywall ,no hole preparation required, made of durable zinc , easily removed.Deep thread design provides strong engagement , locks into many sizes of drywall 3/8", 1/2" or 5/8" gypsum wallboard.
Kit Includes 100 Zinc Anchors, 100 #8 x 1-1/4'' Phillips Screws and a Plastic Case.
Description
High-quality Zinc Self-Drilling Anchor with Screws Kit Includes 100pcs Zinc Anchors and 100pcs #8 x 1-1/4'' Phillips Screws and a Plastic Case
Applicable to 3/8", 1/2" or 5/8" gypsum wallboard, No Pre-Drilling Needed, Anchors can be Removed
7. Qualihome Drywall and Hollow-wall Anchor Assortment Kit, Anchors, Molly Bolts, Screws, and Toggle Bolts Wings, 100 Piece.
Feature
The ribs on the plastic anchors prevent the anchor from turning in the hole during installationThe molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer
These toggle bolts are anchors for use in hollow walls and hollow masonry applications
Comes in a handy Plastic organizer case with size compartments for easy storage
For a complete list what the kit includes scroll down or click see more product details
Description
The ribs on the plastic anchors prevent the anchor from turning in the hole during installation, The split in the ribbed anchors expand on two opposing sides as you tighten the screw, creating a strong hold in drywall
The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer whereas ones with blunt ends require a pre-drilled hole. Zinc plating offers some corrosion resistance.
These toggle bolts are anchors for use in hollow walls and hollow masonry applications. The toggle bolt's wing spreads the force over a larger load bearing surface and comes attached to a machine screw. Toggle bolts are single-Toggle Bolts can be Used in Drywall, Hollow Block, Plaster, Tile
Kit includes:
#4 - 6 x 7/8" Plastic Ribbed Anchor, 25 Pieces
#6 x 1" Pan Head Combo Sheet Metal Screw, 25 Pieces
#10 - 12 x 1-1/4" Plastic Ribbed Anchor, 12 Pieces
#10 x 1-1/2" Pan Head Combo Sheet Metal Screw, 12 Pieces
#12 - 16 x 1-1/2" Plastic Ribbed Anchor, 7 Pieces
#12 x 2" Pan Head Combo Sheet Metal Screw, 7 Pieces
1/8" x 2" Toggle Bolt Screw, 4 Pieces
Toggle Bolt Wings , 4 Pieces
1/8" SD Hollow Wall Anchor , 4 Pieces
8. 200 lbs Drywall Anchor Mounting Kit for Wall Mounting Without Studs or Through Metal/Steel Studs to Mount TVs, Grab Bar, Etc. Includes:1/2" Drill Bit, 4 X 200lbs SNAPTOGGLE Anchors, 4 Screws+Washers
Feature
METAL/STEEL STUD WALL MOUNTING KIT. Complete mouting kit to facilitates secure & easy installation of TVs/etc on metal/steel studs or 1/2 drywall. Metal studs are common in condos, apartments and office/commercial buildingsSTUD NOT REQUIRED. Can support upto 200lbs on 1/2" drywall. STRONGEST BOLT AVAILABLE (MADE IN USA) 4 Pieces of SNAPTOGLLER TOGGLE BOLTS provided can be used on Gypsum board, Drywall, Tile over drywall, Plasterboard, Composite panels, Cement board, Greenboard, Plaster, Stucco.
COMPLETE KIT - One 1/2" hex socket titanium drill bit, 4pcs of -20 UL rated hollow wall toggle anchors, 4pcs of -20 x 2'' screws, 4pcs of '' washer, Electrical tape to mark positions of items you are mounting. NO trips to home depot or lowes.
OTHER MOUNTING USE - Mounting of Shelves,Cabinet mounting, Bathroom Accessories, Grab Bar, Vanity, Draperies, Curtain Rods, Blinds and Mirrors on - : Drywall, plaster over lath, gypsum, panels, cement board, MDF.
NEATLY LABELED PACKAGING & MANUAL- The components in this package is separated by different use, the instruction manual is also included
Description
DescriptionDrywall and Metal/Steel Stud TV Mounting Kit
EASY to use Wall mounting solution for metal/steel studs walls and MOST TYPES of WALLS when mounting on a STUD is NOT and OPTION
Included in the kit is
4 PIECES of -20 SNAPTOGGLE hollow wall anchors
4 PEICES of -20 x 2'' screws
ONE TITANIUM COATED HEX SHANK '' Drill Bit worth $20
4 PIECES of '' washer
ONE ROLL of Electrical Tape
BUY NOW and make the most of your living or working space by mounting your TV to the wall for convenient and comfortable viewing. This product can also used for mounting when a stud is not available. The provided revolutionary toggle bolts can hold upto 200lbs on 1/2" drywall.
They make smaller holes and are 4x faster to install then wing bolts or wing toggles.
Pre-installs without the bolt to make handling of fixture easier.
Reusable in the same hole - remove the bolt without losing the anchor.
New ergonomic design - fingers grip straps more naturally and more easily with no slipping
Strong-up to 2x the loadof an old-fashioned wing toggle
Save time-at least 6 minutesper anchor versus wing toggles
Save money-turn a 2-person job into a 1-person job
CAN BE USED FOR Flat panel TV's TV mounts Lighting fixtures Window treatments Marine applications Hand rails Grab bars ADA hardware Office furniture Heavy machinery Partitions Cabinets Shelving Solar panels Garage doors Sinks Heavy fans DSS antennas Reinstallations Roofs & decking
9. GeeFix Heavy Duty Drywall Anchor System (Pack of 4)
Feature
Strongest hollow wall anchors on the marketMaximum shear load is 595lbs and maximum tensile load is 156lbs
Maximum cantilever load at 12 inches is 224lbs
Industry safety standards recommend of the ultimate load. The above maximum load-testing figures are for in 5/8 in drywall and are provided as guides only and cannot be guaranteed. The age, condition and capacity of base materials must be considered.
Requires a 1" spade bit or hole saw. Hole saw is recommended for plaster walls.
Description
Independent strength tests on inch drywall show that GeeFix is up to four times stronger than other heavy duty wall anchors on the market! Designed and Made in Britain, GeeFix represents the cutting edge in wall anchor technology and is taking the U.K. by storm. Now available in the U.S. exclusively through GeeFix USA. GeeFix is a versatile heavy duty drywall anchor system with unrivaled strength. Suitable for all types of hollow wall construction including drywall, plasterboard, hardboard, plywood, sheet metal, chipboard, MDF, lath and plaster and other materials. Mount heavy items to your walls without using a stud. . **Requires a 1" spade bit or hole saw. Watch how easy GeeFix is to install at www.youtube.com/watch?v=HMa8LUH2wm8 Ideal applications include: Flat screen TVs, Computer Monitors, Ceilings, Curtains, Cabinets, Closet Rods, Blinds, Baby Gates, Bike Hooks, Floating Shelves, Flat Screen TVs, Grab Bars, Hanging TVs, Wall Art, Kitchen Cabinets, Large Mirrors, Plaster Walls, Shelves, Speakers, X-Ray Rooms, Hollow Walls, Furniture Straps, and many more... www.GeeFixUSA.com10. Glarks 42Pcs 6 Size Heavy Duty Zinc Plated Steel Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit for Drywall, Plaster and Tile
Feature
Product Type: High quality heavy duty molly bolt drive hollow drive wall anchor screws kitPackage: In this kit, it include 6 size of 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm, 6x65mm total 42pcs packed in a durable plastic box, convenient for your use and storage
Meterial: They are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items
Feature: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety
Application: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches
Description
Glarks high quality heavy duty molly bolt drive hollow drive wall anchor screws kitSpecification:
Product type: Molly bolt drive hollow drive wall anchor
Meterial: Zinc plated steel
Size: 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm, 6x65mm
Feature:
Zinc plated on the surface can keep them from rust and corrosion
Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety
Suitable for a wide range of thicknesses of hollow walls
Package:
4x32mm (Fit 3 -12mm thick panel) -------------- 12pcs
4x60mm (Fit 28 -38mm thick panel) ------------ 10pcs
5x52mm (Fit 3 -14mm thick panel) -------------- 6pcs
5x65mm (Fit 14 - 27mm thick panel) ------------ 6pcs
6x52mm (Fit 3 - 16mm thick panel) -------------- 4pcs
6x65mm (Fit 14 - 32mm thick panel) ------------ 4pcs
Total: 42pcs
Installation Steps:
1. Drill a hole in the wall first
2. Insert the hollow wall anchor into the hole
3. Hold the screw head with a tool and pull it outwards, and the anchor expanded
4. Place the object and install the screw in
Application:
Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches