When it comes to choosing your threaded inserts for wood 1/4, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best threaded inserts for wood 1/4. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best threaded inserts for wood 1/4.

When it comes to choosing your threaded inserts for wood 1/4, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best threaded inserts for wood 1/4. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best threaded inserts for wood 1/4.

Best threaded inserts for wood 1/4

Product Features Editor's score Go to site
40Pcs Anwenk 1/4 40Pcs Anwenk 1/4"-20 x 15mm Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket Drive for Wood Furniture Assortment
Go to amazon.com
E-Z Lok Threaded Insert, Brass, Knife Thread, 1/4 E-Z Lok Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)
Go to amazon.com
40pcs 1/4 40pcs 1/4"-20 Threaded Insert Nutsert Screw in Nut for Wood Inserts Furniture Connector Screws 1/4-20
Go to amazon.com
VIGRUE 81PCS 1/4 VIGRUE 81PCS 1/4"-20 x 15mm/20mm/25mm Threaded Inserts Nuts for Wood Zinc Plated Carbon Steel Hex Socket Drive Furniture Flanged Screw-in Nut Assortment Set with One Wrench
Go to amazon.com
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 1/4 E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 1/4"-20 Internal Threads, 25mm Length (Pack of 50)
Go to amazon.com
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 3/8 E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 3/8"-16 Internal Threads, 25mm Length (Pack of 25)
Go to amazon.com
E-Z Lok Threaded Insert, Zinc, Hex-Flush, 1/4 E-Z Lok Threaded Insert, Zinc, Hex-Flush, 1/4"-20 Internal Threads, 0.789" Length (Pack of 50)
Go to amazon.com
E-Z Lok Threaded Insert, Brass, Knife Thread, 3/8 E-Z Lok Threaded Insert, Brass, Knife Thread, 3/8"-16 Internal Threads, 0.625" Length (Pack of 10)
Go to amazon.com
50pcs 1/4-20 Threaded Insert for Wood Furniture Insert Nuts Screw in Nuts 50pcs 1/4-20 Threaded Insert for Wood Furniture Insert Nuts Screw in Nuts
Go to amazon.com
POWERTEC QTI1002 1/4 POWERTEC QTI1002 1/4"-20 Threaded Insert for Wood | Zinc Plated Screw-in Nut for Woodworking - 50 Pack | a Woodworking Shop Essential | Superior Fastening | for Hard and Soft Wood and More
Go to amazon.com

1. 40Pcs Anwenk 1/4"-20 x 15mm Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket Drive for Wood Furniture Assortment

Feature

(We apologize for previous mistake by messing up some wrong screws, but we removed them all as soon as we found the problem. All inventory for sell will be the correct 1/4"-20x15mm screw type, please rest assured to purchase. ) 40pieces Pack of Furniture Screws Threaded Inserts for Wood Furniture.
Size: Internal Thread Insert Type: 1/4"-20, External Diameter: 10.5mm, Total Length: 15mm. (1/4"-20x15mm)
Material: High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design.
Usage: Pre-drill /drill a well-sized hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 18mm), then use a proper internal hex tool to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the screw hole.
Applications:These furniture screws are suitable for furniture hardwood/ solid wood, for furniture combinations.

Description

Anwenk 40pcs of Furniture Screws Threaded Inserts for Wood Furniture Assortment 1/4"-20 x 15mm
Spec:
Thread Type: 1/4"-20
Total Length: 15mm
External Diameter: 10.5mm
Material: carbon steel
Quantity: 40pieces Pack

How to Use: Pre-drill/ drill a proper size hole then screw in with an internal hex tool.
Tips:
1. We suggest drilling a hole with diameter 9.6 +/- 0.2mm;
2. If the wood material is with high-hardness,enlarge the screw hole to screw in fit.

2. E-Z Lok Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)

Feature

Provides a Strong Machine Thread In Hard Woods
Ideal For Use in Woods Like Oak, Cherry, and Maple
Designed For Use In Furniture, Cabinetry, Storm Windows and Marine Applications
Simply Drill the Appropriately Sized Hole and Install with Screwdriver or Optional Drive Tool
Proprietary External Knife Threads Provide Superior Holding Power

Description

E-Z LOK Knife Thread inserts for hard wood significantly reduce the possibility of stripping when using a threaded fasteners in materials such as oak, cherry, and maple. Ideal for applications ranging from furniture to cabinetry to storm shutters, E-Z LOK Knife Threads are easily installed using a standard screwdriver or optional drive tool. Simply drill the appropriately sized hole and thread in the insert like an ordinary fastener. Proprietary external Knife Threads slice into hard wood, providing holding power superior to that of typical broad threads which crush wood during installation.

3. 40pcs 1/4"-20 Threaded Insert Nutsert Screw in Nut for Wood Inserts Furniture Connector Screws 1/4-20

Feature

1/4"-20 threaded wood insert x 15mm length, 6mm allen wrench included, best 1/4"-20 threaded insert wood insert furniture screw in nut connector screws.
Insert head : 0.461" / 11.7mm, body : 0.315" / 8mm, threads : 0.410" / 10.4mm.
-Suggested Drilling Hole for Soft Wood: 8.5mm, 9mm, 3/8". - Suggested Drilling Hole for Hard Wood: 3/8", 10mm. (NOTE: SIZE of Drilling Hole Depends on the Hardness of the Material)
In Softer wood, the outside threads cut easily into the wood, simply drill a proper hole size (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place.
In very Harder wood such as white oak or maple, drill a hole size (3/8", 9.5mm, 10mm drill bit) that close to the outside threads diameter. If the drilled hole is too small for the threads, screwing it in MAY split the wood or insert.

Description

1/4"-20 threaded insert wood insert furniture screw in nut connector screws


Thread Type: 1/4"-20
Total Length: 15mm
Insert head diameter: 11.7mm
Insert Threads Diameter: 10.4mm
Body Diameter: 0.315" / 8mm.
Material: carbon steel, zinc plated


-Suggested Drilling Hole for Soft Wood: 8.5mm, 9mm, 3/8".
-Suggested Drilling Hole for Hard Wood: 3/8", 10mm.


NOTE: SIZE of drilling hole depends on the Hardness of the Material

Please drill a proper hole, test to check if inserts fit appropriately.


In Softer wood, the outside threads cut easily into the wood, simply drill a proper hole size (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place.

In very Harder wood such as white oak or maple, drill a hole size (3/8", 9.5mm, 10mm drill bit) that close to the outside threads diameter.
If the drilled hole is too small for the threads, screwing it in MAY split the wood or insert.

Package comes with 40pcs wood insert nut + 1pc 6mm allen wrench.

4. VIGRUE 81PCS 1/4"-20 x 15mm/20mm/25mm Threaded Inserts Nuts for Wood Zinc Plated Carbon Steel Hex Socket Drive Furniture Flanged Screw-in Nut Assortment Set with One Wrench

Feature

VIGRUE 81PCS Threaded inserts for wood are used for pre-embedded connectors for wood furniture. Standard hex socket head, smooth & flat, features flanged thread texture, stable structure and easy installation.
High Quality Material: High quality carbon steel with high hardness. Yellow zinc plated surface, anti-corrosion and anti-oxidation, with no burr and flanged anti-slip design, wear-resistant and very practical.
Package Quantity: 81pcs screw-in nuts and wrench are organized in a durable box. Internal thread insert type: 1/4"-20, external diameter: 10.5mm/0.41inch. 3 sizes: 1/4"-20x15mm 40pcs; 1/4"-20x20mm 20pcs; 1/4"-20x25mm 20pcs, one piece free hex wrench included. Meet your different needs.
Usage Steps: Pre-drill a proper hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 18mm), then use our internal hex wrench to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the hole.
Application: Suitable for soft woods of pine, plywood, fiberboard, etc, work ferfectly on the furniture combination.

Description

1

5. E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 1/4"-20 Internal Threads, 25mm Length (Pack of 50)

Feature

Provides a Strong Machine Thread In Soft Woods
Ideal For Use in Pine, Plywood, Composition Board, and MDF
Designed For Use In Applications Such As Ready-To-Assemble Furniture, Drawer Pulls, Display Case, and Shipping Crates
Simply Drill the Appropriately Sized Hole and Install with Hex Key or Optional Drive Tool
Tapered External Threads Resist Pull-Out Caused By Vibration

Description

E-Z LOK Hex Drive inserts for soft wood are an inexpensive insert for use in ready-to-assemble furniture, drawer pulls, or wherever the avoidance of thread stripping is desired. Ideal for use in materials such as pine, plywood, composition board, and MDF, Hex Drive inserts feature tapered external threads which resist pull out caused by vibration. These die-cast zinc inserts are available in a flush design for "below the surface" installation or in a flanged design for installation depth limiting applications.

6. E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 3/8"-16 Internal Threads, 25mm Length (Pack of 25)

Feature

Provides a Strong Machine Thread In Soft Woods
Ideal For Use in Pine, Plywood, Composition Board, and MDF
Designed For Use In Applications Such As Ready-To-Assemble Furniture, Drawer Pulls, Display Case, and Shipping Crates
Simply Drill the Appropriately Sized Hole and Install with Hex Key or Optional Drive Tool
Tapered External Threads Resist Pull-Out Caused By Vibration

Description

E-Z LOK Hex Drive inserts for soft wood are an inexpensive insert for use in ready-to-assemble furniture, drawer pulls, or wherever the avoidance of thread stripping is desired. Ideal for use in materials such as pine, plywood, composition board, and MDF, Hex Drive inserts feature tapered external threads which resist pull out caused by vibration. These die-cast zinc inserts are available in a flush design for "below the surface" installation or in a flanged design for installation depth limiting applications.

7. E-Z Lok Threaded Insert, Zinc, Hex-Flush, 1/4"-20 Internal Threads, 0.789" Length (Pack of 50)

Feature

Provides a Strong Machine Thread In Soft Woods
Ideal For Use in Pine, Plywood, Composition Board, and MDF
Designed For Use In Applications Such As Ready-To-Assemble Furniture, Drawer Pulls, Display Case, and Shipping Crates
Simply Drill the Appropriately Sized Hole and Install with Hex Key or Optional Drive Tool
Tapered External Threads Resist Pull-Out Caused By Vibration

Description

E-Z LOK Hex Drive inserts for soft wood are an inexpensive insert for use in ready-to-assemble furniture, drawer pulls, or wherever the avoidance of thread stripping is desired. Ideal for use in materials such as pine, plywood, composition board, and MDF, Hex Drive inserts feature tapered external threads which resist pull out caused by vibration. These die-cast zinc inserts are available in a flush design for "below the surface" installation or in a flanged design for installation depth limiting applications.

8. E-Z Lok Threaded Insert, Brass, Knife Thread, 3/8"-16 Internal Threads, 0.625" Length (Pack of 10)

Feature

Provides a Strong Machine Thread In Hard Woods
Ideal For Use in Woods Like Oak, Cherry, and Maple
Designed For Use In Furniture, Cabinetry, Storm Windows and Marine Applications
Simply Drill the Appropriately Sized Hole and Install with Screwdriver or Optional Drive Tool
Proprietary External Knife Threads Provide Superior Holding Power

Description

E-Z LOK Knife Thread inserts for hard wood significantly reduce the possibility of stripping when using a threaded fasteners in materials such as oak, cherry, and maple. Ideal for applications ranging from furniture to cabinetry to storm shutters, E-Z LOK Knife Threads are easily installed using a standard screwdriver or optional drive tool. Simply drill the appropriately sized hole and thread in the insert like an ordinary fastener. Proprietary external Knife Threads slice into hard wood, providing holding power superior to that of typical broad threads which crush wood during installation.

9. 50pcs 1/4-20 Threaded Insert for Wood Furniture Insert Nuts Screw in Nuts

Feature

Pack of 50 Hex Drive 1/4-20 Threaded Insert Wood Insert Nuts Furniture Screw in Nut.
Threaded insert head diameter: 0.461" / 11.7mm, body diameter: 0.315" / 8mm, threads diameter: 0.410" / 10.4mm.
1/4-20 Insert nut goes into a predrilled hole in wood and has internal threads, the Screw-In insert offers a strong permanent thread for wood.
In Soft wood, recommended drill bits are 8.5mm, 9mm, 3/8 inch, (As best practice varies between applications, you should decide the proper drill bit yourself according to the hardness of your material.)
In Hard wood such as white oak or maple, recommended drill bits are 3/8 inch, 9.5mm, 10mm, (As best practice varies between applications, you should decide the proper drill bit yourself according to the hardness of your material.)

Description

50pcs 1/4"-20 Threaded Insert for Wood Nutsert Screw in Nut Insert for Furniture 1/4-20

Hex Drive Threaded Insert with 1/4-20 Internal Thread Size, the hexagon drive allows for easy installation.

1/4"-20 Threaded Inserts are Ideal for use in composite materials, hard and soft wood.


INSTALLATION:

SOFT WOOD:

When use this 1/4-20 threaded inserts in softer woods and plywood, inserts outside threads cut easily into the wood, so simply drill a hole sized for the body of the insert, and screw it into place.
Recommended drilling hole size for Soft Wood: 8.5mm, 9mm, 3/8 inch.(Please choose the proper drill bit yourself according to the hardness of your material)


HARD WOOD: (Be careful with hard materials)
When use this 1/4-20 threaded inserts in hard woods such as white oak and maple, drill a hole sized that close to the outside threads diameter. If the drilled hole is too small for the threads, screwing it in MAY split the wood or the insert nut.
Recommended drilling hole size for Hard Wood: 3/8 inch ,10mm (Please choose the proper drill bit yourself according to the hardness of your material)

Please note that installation advice is guidance only, as best practice varies between your applications.

10. POWERTEC QTI1002 1/4"-20 Threaded Insert for Wood | Zinc Plated Screw-in Nut for Woodworking - 50 Pack | a Woodworking Shop Essential | Superior Fastening | for Hard and Soft Wood and More

Feature

INCLUDES: 1/4"-20 Zinc Plated threaded inserts for wood working applications, 15/32"; Handy 50PK
EASY TO USE: Install with a screwdriver (or optional drive tool) after drilling the appropriately sized hole
VERSATILE: Ideal for woodworking projects involving cherry, oak, maple, pine, plywood, and other hard and soft woods, as well as MDF, composite and plastic

Description

Introducing the Zinc Plated Wood Inserts by POWERTEC

These solid threaded inserts allow you to repair or reinforce threaded holes for your wood installations. Without the use of any special tools, these fasteners allow you to simply drill, tap, and thread. Whether you're tapping into soft or hard wood, their premium design significantly reduces the possibility of stripping - getting you the most out of your hardware. Ultra useful when installing knobs, legs and other furniture parts and components for perfect furniture installations. These exclusive 1/4 in. threaded insertsmake for securely fastened wood projects and happy woodworkers - professional and DIY, alike.

Conclusion

By our suggestions above, we hope that you can found the best threaded inserts for wood 1/4 for you. Please don't forget to share your experience by comment in this post. Thank you!