If you looking for alpine bass knob for car amplifier then you are right place. We are searching for the best alpine bass knob for car amplifier on the market and analyze these products to provide you the best choice.
If you looking for alpine bass knob for car amplifier then you are right place. We are searching for the best alpine bass knob for car amplifier on the market and analyze these products to provide you the best choice.
Best alpine bass knob for car amplifier
1. Rockford Fosgate R1200-1D Prime 1,200 Watt Class-D Mono Amplifier
Feature
Tri-stage protection covers thermal, over-current and short circuits.On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
Variable crossover 12dB/octave slopes
Infrasonic filter
Optional Remote PEQ (Level control)
Description
New Rockford Fosgate Prime 1200 Watt Class D 1 channel Amplifier2. Alpine RUX-KNOB Remote Bass Level Control Knob for PDX-M12 and PDX-M6
Feature
Remote Bass Level Control Knob16-1/2" (5 meters) Connection cable
Plugs directly in for quick direct subwoofer control
Remote level controller for Alpine PDX and MRX Series amplifiers
Easily adjust the bass gain of your amp while seated inside
Description
Remote Bass Level Control with 5m Connection Cable.Remote Bass Level Control Knob|16-1/2" (5 meters) Connection cable|Plugs directly in for quick direct subwoofer control|Remote level controller for Alpine PDX and MRX Series amplifiers|Easily adjust the bass gain of your amp while seated inside3. Alpine RUX-KNOB.2 Remote Bass Level Control
Feature
Works with Newer X Series Alpine AmplifiersBackwards Compatible with PDX Amplifiers
Description
The RUX-KNOB.2 remote level controller works with Alpine's amplifiers so you can manage your bass level from the front of your vehicle. This handy little knob adjusts your amp's level from its set maximum volume all the way down to virtually "off." Since it adjusts level and not "bass boost," you'll maintain the same bass tone as you turn the volume up and down. You can control multiple amplifiers with a single remote by adding a standard phone cable splitter (not included).4. Alpine Electronics PWE-S8 Restyle Compact Powered 8-Inch Subwoofer
Feature
8-inch subwoofer and 120W amplifier, housed together in a cast aluminum enclosureThe compact size measures just 13.5" L x 9" W x 3" D so it can be installed under or behind a seat in a truck, in a sedan's trunk or in an SUV's hatch
32Hz-150Hz frequency response, Power Rating: 120W RMS
RCA and Auto-sensing Speaker Level Inputs are located on the side panel, along with controls for Phase, Gain, LP Crossover and Remote Sub Level
The PWE-S8 is an Authorized Online Product Sold By and Shipped from Amazon; visit the store locator on the Alpine USA website for professional installation
Description
The PWE-S8 Alpine Restyle Compact Powered 8-inch Subwoofer is an easy way to add powerful bass to your vehicles sound system. It features a powered 8-inch subwoofer paired with a built-in amplifier, housed together in a cast aluminum enclosure. The PWE-S8 measures just 13.5 L x 9 W x 3 D (at the tallest point) so you can add low, punchy, accurate bass to your sound system without taking up much space in your vehicle. The compact shallow mount design gives you the flexibility to install the PWE-S8 under or behind the seat of a truck, in the trunk of a sedan, or in the hatch of an SUV, or tucked in any other compact space. The die cast aluminum construction provides durability for ongoing performance. The amplifier produces 120W continuous power and the quad-coil subwoofer delivers 32Hz-150Hz frequency response. The PWE-S8 connects to your sound system through the RCA or Auto-sensing Speaker Level Inputs which are conveniently located on the side panel. The side panel also gives you access to Phase, Gain, LP Crossover and Remote Sub Level controls for proper sound setup and greater flexibility during installation. The PWE-S8 is authorized to be sold and shipped from Amazon. For professional installation, visit the store locator on the Alpine USA website to find an authorized Alpine retailer near you.5. Rockville dB12 2000 Watt/1000w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp
Feature
Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner's manual. Mounting Screws. Warranty.Rockville dB12 2000 Watt/1000w RMS Mono Class D 2 Ohm Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.). 2 Ohm: 500 Watts x 1 Channel <1% THD+N. 4 Ohm: 300 Watts x 1 Channel <1% THD+N.
RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 1000 Watts x 1 Channel. 4 Ohm: 600 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 2000 Watts x 1 Channel. 4 Ohm: 1200 Watts x 1 Channel. High-Speed MOSFET Power Supply.
Designed, Engineered, Developed, and Quality Controlled in the USA. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch 0-180 degrees. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. RCA Line Input (This is to connect the amplifier to your receiver).
Molded power terminals have the highest current draw in the industry and they also look way nicer than other terminal styles. 8 Volt Preamp Circuitry. Power and Protection LED Indicator. LED Illuminated Logo. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 60 Amp Maxi Fuse. Dimensions: (W x H x L) 9 x 2.4 x 13.1.
Description
The dB12 is a class D monoblock high power amplifier with 2,000 watts peak output, 1,000 watts RMS output, and 500 watts CEA-2006 rated power. All of the mono amplifiers in the dB series are 2 ohm stable. They are all CEA-2006 compliant, which makes it easy to compare this amplifier to other CEA compliant amps on the market. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. So we provided 3 ratings for all of our car amplifiers. We provided a CEA compliant rating, which you should use to compare this amplifier to other premium brands that make CEA compliant products such as Kicker, Rockford Fosgate, Kenwood, Pioneer, etc. We also supplied an RMS rating that is not CEA ompliant, but has become standard in the industry. You should use this rating when comparing with ratings from brands such as Hifonics, Earthquake, DB Drive, etc. Lastly, we also supply a peak rating which almost all brands in the industry provide. This peak power is the amount of power the amp puts out at the loudest moments during a particular song.One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. The dB12 features a Maxi fuse with a rating of 60 Amps. Although we rate these conservatively at 500 watts CEA @ 2 ohms, this amplifier puts out more power than this!
This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dB12 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.
6. Massive Audio UR1 Amplifier Gain Control Knob. Adjustable Gain Amplifier Remote Level Controller for All Current Massive Audio Amplifiers - 0 to 12 dB Sub Amp Gain Control
Feature
A MUST HAVE | The UR 1 Gain Amplifier Subwoofer Volume Knob allows you to control your Subwoofer output channel from the driver's chair for when you need that quick adjustments without fussing with your Graphic Equalizer or Stereo Volume Controls!RATED FIVE STARS | The UR 1 is a great control knob to have and a nice addition to your sound system. With its good build quality, the control knob is very precise, giving you unparalleled level of control on adjusting the bass for different types of music.
EASY SETUP | Works great, and it is very easy to mount on your car's console with no hardware to buy. Great for multi-sub setups in cars. Adjust the volume on the fly, and crank it up!
HIGH COMPATIBILITY | With the exception of the Drago Series Ampllifiers, the UR 1 Gain Amplifier Remote Knob works with all Massive Audio Amplifier models 2014 and beyond! There's no need for you to change your Remote Subwoofer Volume Knob every time you upgrade your Audio Amplifier!
MASSIVE AUDIO QUALITY GUARANTEED | Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers.
Description
This amplifier gain knob will work with any Massive Audio amplifier made after 2014 except for DRAGO amplifiers. Complete your system with Massive Audio's Amplifier Gain Remote. The Massive UR1 Gain Remote Knob will allow you to control your woofer output channel from the drivers chair for when you need that quick mute or simply want to reduce your low end output without fussing with your EQ or head units volume controls. Small Dash Mount Single Knob System with 0 - 12dB Sub Amp Gain Control. For all Second Generation Nano Block Amplifiers N2, N3, N4, NX3 and NX5. Also for all future amplifiers and is already compatible with the following 2013 new production models: D1200 & amp; D8000. Second Generation Nano Blocks can be identify by the updated logo badge which said, "Massive High Performance Audio".7. Alpine MRV-M1200 Monoblock 1200 Watts RMS Class D Amplifier
Feature
Amplifier Type: Class-D (Digital) | Channel Design: 1 Channel (Mono) | Power Supply Design: DC-DC PWM | Power Supply: MOSFET | Pre-Amp Stage: Discrete | Final Outputs: Power MOSFET | Crossover: Variable Lowpass FilterGain Control: Continuously Adjustable Gain Control | Remote Turn On: Remote Sensing Function (for Speaker Level Input) | Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection | Board Circuitry: S.T.A.R. Circuit | RCA Output: Non-Fading Pre-Amp Output (4 Volts)
Speaker-Level Inputs: 4-channel Speaker Level Inputs | Power Indicator: Top Mounted Blue LED Power Indicator | Thermal Control: Multi-stage Power Limits | Power Requirements: 14.4 V.DC (11-16V allowable) | Input Sensitivity (RCA Input): 0.15 - 4.0 V | Input Sensitivity (Speaker Level Input): 0.4 - 10 V | Input Impedance: >10k ohms
Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz | Damping Factor (10W into 4 Ohms at 100Hz): >750 | Signal to Noise (1W into 4 Ohms): >85 dB | Signal to Noise (Rated Power into 4 Ohms): >105 dB | Preamp Output: 4.0V Max. | Remote Level: -20 to 0 dB
RMS Power Ratings: Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1% THD+N) | Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1% THD+N) | Max Power Output Ratings: Total Max Power: 2400 W | Dimensions: Foot Print (WxHxD) in: 7.87 x 2.16 x 7.87 in | Heat Sink (WxHxD) in: 6.50 x 2.16 x 7.87 in
Description
ALPINE MRV-M1200 AMP 1 CHANNEL 2400 WATTS MAX SUBWOOFERS SPEAKERS BASS AMPLIFIER NEW8. PAC LC-1 Remote Amplifier Level Controller
Feature
Remote amplifier level controllerEnables volume balance in any part of an amplified system
Adds subwoofer level controls to any head unit
Stereo RCA input and output
Description
The PAC-LC-1 remote amplifier level control, used to adjust an amplifier's power level, stereo, equalizer or crossover volume form the dashboard or other remote locations. It adds sub-woofer level controls or balances a multiple amplifier installation. Fine tunes the volume of any RCA line level signal you wish to control. Compact housing allows the unit to be mounted virtually anywhere so control is at the users fingertips. Simple in and out connections, no additional wiring needed. Great for a sub amp volume control.9. Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier
Feature
300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dBOnboard 12dB/octave LP/HP/AP crossover & Infrasonic filter
On-board Punch EQ with +18dB boost at 45Hz
Cast Aluminum Heatsink with Stealth top mounted control panel
Includes wired remote (Punch Level Control)
Description
Get more out of your car audio and take it to the next level of audio perfection with the unparalleled performance of the Rockford Fosgate 500-Watt Mono D Amplifier with Remote. This Rockford Fosgate is a quality-made Mono D car amplifier rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn-on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, and phase switch. The amplifier is CEA-2006 compliant and comes with a remote bass control. Great audio starts with a great amp, so be sure to choose quality with the Rockford Fosgate 500-Watt Mono D Amplifier with Remote.10. MRV-M500 - Alpine Monoblock 500W RMS V Power Series Car Amplifier
Feature
MRV-M500 - Alpine Monoblock 500W RMS AmplifierEvolution to Class D digital platform
New snap-on terminal covers for easy installation
Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
Dimensions (WxHxD) in: 7-7/8'' x 2-3/16'' x 7-7/8''