If you looking for welding ground clamp and cable then you are right place. We are searching for the best welding ground clamp and cable on the market and analyze these products to provide you the best choice.
Best welding ground clamp and cable
1. 300 Amp Welding Ground Clamp Lead Assembly - Terminal Lug Connector - #1 AWG Cable (15 Feet)
Feature
Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #1 AWG - 0.488" O.D.Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing
Tinned Copper Cable Lug Connector. ***Please check connector size in the picture and compare with your welders Connector/Receptacle to make sure it fits***
RATED: 300 AMP @ 60% Duty Cycle. ***Please Check you welders maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
Cable Length: 15 Feet - You will receive a fully assembled lead, no tools required and ready to use.
Description
This welding lead is assembled using Highly flexible, Made in the USA, Flex-A-Prene cable. All our cable assemblies use over-calculated Electrode Holders, Ground Clamps, and Connectors with an amperage capacity always higher than the assembly amperage rating. This prevents over-heating and increases safety. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil, and water. The is the only welding cable that currently meets SAE J1127. INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50C to +105C (-58F to 221F) - Rated 600 Volts. ***Before you buy please double-check the type and size of the cable Connector/Receptacle in your welder, Also check the maximum Amperage and duty cycle of your welder and look for a cable assembly that matches or exceeds that amperage rating***2. Taipan Abrasives WC-01530 Weldclass Model P6-EC300H Platinum Heavy Duty Ground Clamp, 300 Amp
Feature
Fast & easy to fit - no cable lug requiredRobust and durable
One-piece cable terminal and jaw: very direct current flow from the cable to the job
Description
All types of welders up to 500 Amps. Suitable for mig/stick/TIG welders. Clamps up to 50mm RHS or pipe. Cable fits directly to clamp using a hex-wrench/alan-key (supplied with the clamp).WHY USE WELDCLASS HEAVY DUTY EARTH CLAMPS ? Fast & Easy to Fit - No Cable Lug Required Robust and Durable One-Piece Cable Terminal and Jaw: Very direct current flow from the cable to the jobAPPLICATION INFO: All types of Welders up to 500 Amps Suitable for MIG/STICK/TIG Welders Clamps up to 50mm RHS or pipeWHAT ELSE ? Cable Fits Directly to Clamp using a Hex-Wrench / Alan-Key (supplied with the clamp) Very Positve Cable Connection - Withstands high degree of cable strain Solid Brass Jaws.3. TOSENBA Welding Ground Clamp Earth and Cable 10Feet 16mm Connector DKJ10-25 Copper Grip Clip Clamp
Feature
Arc Welding Manual Welder Earth Ground Cable Copper Grip Clip ClampConstructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection.
3M lead cablecable sectional area:16mm
Can be used in stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications
Perfect for replacing lost or damaged ground clamps and leads
Description
1.Arc Welding Manual Welder Earth Ground Cable Copper Grip Clip Clamp
2.Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection.
3.3M lead cablecable sectional area:16mm
4.Can be used in stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications
5.Perfect for replacing lost or damaged ground clamps and leads
Specification:
Ground Cable Clip Clamp
100%Brand new and high quality
Material: chrome-plated +copper belt
Color: Silver
Size: Approx. 17cmx7.5cm
Cable sectional area:16mm
Quantity: 1 Pc
Package Including:
Welding Ground Clamp
3M cable
Connector DKJ10-25
4. ESAB 92051130: GC300 300A JR Ground Clamp Copper
Feature
Can be used in stick welding, submerged arc welding, Gas metal arc welding and Gas Tungsten arc welding applicationsRugged and reliable design
Ball point screw secures the welding Cable to the ground Clamp
Copper cast upper and lower jaws
Heavy duty insulated spring
Description
Tweco ground clamp with an Amperage capacity of 300 a has a 1 1/2 - 4" deep jaw opening and the 8 1/2" clamp features a ballpoint thru 3/0 cable connection capacity.5. KINGQ Welding Ground Clamp, Tweco, 300-Amp, Brass
Feature
8-Inch long with 2-Inch jaw opening300-Amp welding cable capacity
Rugged, versatile, wide jaw ground clamp
Good for most grounding situations
Large contact surface area provides good cable connections and positive grounding
6. WeldingCity 300A Earth Ground Clamp and 10-ft Welding Cable Set with Lug Connector
Feature
Premium quality brand-new 300Amp earth ground clamp and 10-ft welding cable set.Current rating: 300Amp. Welding cable length: 10-ft with cable lug connector.
Strong technical support with experienced customer service to address buyer's any question.
Free and Fast Shipping within the U.S.
Description
Premium quality brand-new 300Amp earth ground clamp and 10-ft welding cable set. Current rating: 300Amp. Welding cable length: 10-ft with cable lug connector.7. LINCOLN ELECTRIC CO KH525 300A GRND Work Clamp
Feature
Completes electrical circuits for a positive welding arcFeatures wide grip jaws to ensure a firm connection
Grounds work to be welded to a good electrical ground earth
Description
The Lincoln Electric 300-amp grounding work clamp is designed to complete electrical circuits for a positive welding Arc. The clamp features wide grip jaws to ensure a firm connection. The clamp helps ground your work to be Welded to a good electrical ground Earth. The Lincoln Electric grounding work clamp is a durable and reliable welding tool for both novices and professionals.8. Hobart 770031 400-Amp T-Style Ground Clamp Brass
Feature
BrassT-Style
400 AMP Rating
9. 200 Amp Welding Ground Clamp Lead Assembly - Terminal Lug Connector - #2 AWG Cable (15 Feet)
Feature
Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D.Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing
Tinned Copper Cable Lug Connector. ***Please check connector size in the picture and compare with your welders Connector/Receptacle to make sure it fits***
RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welders maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
Cable Length: 15 Feet - You will receive a fully assembled lead, no tools required and ready to use.
Description
This welding lead is assembled using Highly flexible, Made in the USA, Flex-A-Prene cable. All our cable assemblies use over-calculated Electrode Holders, Ground Clamps, and Connectors with an amperage capacity always higher than the assembly amperage rating. This prevents over-heating and increases safety. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil, and water. The is the only welding cable that currently meets SAE J1127. INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50C to +105C (-58F to 221F) - Rated 600 Volts. ***Before you buy please double-check the type and size of the cable Connector/Receptacle in your welder, Also check the maximum Amperage and duty cycle of your welder and look for a cable assembly that matches or exceeds that amperage rating***10. Magswitch 8100746 300 Amp Ground Clamp with Fins
Feature
All new fin design lowers temperature by almost 27-percentStronger hold in shear (vertical) position allows for use with heavy gauge ground cable
No more tacking on tabs and searching for ground location
Fast Setup, grounds instantly
Magnet Strength: 90 lbs/40 kg
Full Saturation Thickness: 11g / 3.05mm
2:1 Shear Working Load: 20 lbs / 9 kg
Overall Height: 2.3 in/57 mm
Magnetic Pole Footprint: 40mm Diameterdec