There are many reasons you might choose to buy parts washer pump for solvent but it is not easy to find the best suitable parts washer pump for solvent for you. But don't worry! We did some of the work for you already by researching a few models on the current market. Let's check following article to find the best parts washer pump for solvent.
There are many reasons you might choose to buy parts washer pump for solvent but it is not easy to find the best suitable parts washer pump for solvent for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best parts washer pump for solvent.
Best parts washer pump for solvent
1. Little Giant 518550 PE-2YSA Submersible Parts Washer Pump, 300 Gallons Per Hour
Feature
1/40 horsepower300 GPH @ 1 Feet rise to 12.2 Feet max
115 VAC, 60 Hz single phase
1/4-Inch MNPT discharge and 1/2-Inch MNPT Master Builders conduit fitting
Completely submersible
Description
Little Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550)For submerged use in parts washers using aqueous solutions or UL-listed solvents.Little Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550) Features: Completely submersible Rated for continuous duty 1/4" MNPT discharge Thermal overload protection 1/2" MNPT Master Builders conduit fitting 6 power cord without plug Nylon pump head Double lip Viton shaft seal Stainless steel motor shaftLittle Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550) Specifications: Horsepower: 1/40 Flow: 300GPH @ 1' Cord Length: 6' Shut Off: 12.2' Voltage: 115 Hertz: 60 Amps: .8 Watts: 47 Weight: 4.5 lbs. Height: 5.55" Width: 2.9" Length: 5.4"2. Little Giant 2E-NYS 1/40 HP, 300 GPH @ 1' - Parts Washer Pump, 6' Power Cord No Plug (502020)
Feature
Little Giant2E-NYS
Parts Washer Pumps
Description
Little Giant 2E-NYS 1/40 HP, 300 GPH @ 1' - Parts Washer Pump, 6' Power Cord No Plug (502020)Specialty PumpsDesigned for submerged use only, this pump is intended for use in UL listed parts cleaners. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F.Little Giant 2E-NYS 1/40 HP, 300 GPH @ 1' - Parts Washer Pump, 6' Power Cord No Plug (502020) Features: 1/2" MNPT Conduit Fitting 1/40 HP Oil filled motor 300 GPH @ 1' Maximum flow rate Intermittent Liquid Temp. to 120F Cast aluminum housing Hooded intake 1/4" MNPT discharge Nylon volute & Impeller Viton Shaft Seal Nylon Screen Thermal overload protectionLittle Giant 2E-NYS 1/40 HP, 300 GPH @ 1' - Parts Washer Pump, 6' Power Cord No Plug (502020) Specification: Flow: 300 GPH @ 1' of Head Cord Lenght: 6' Shut Off: 11.8 Voltage: 115 Hertz: 60 Amps: 1.7 Weight: 4.83*This pump is intended to pump unheated, metal parts cleaning solvent, (classified as PJQU as described in the Gas and Oil Equipment Directory).3. Red Sun Parts Washer 3.5 Gallon Capacity Tank Cabinet Electric Solvent Pump&Brush Protable Automotive Parts Cleaner for Wheel Bearings, Gears, and carburetors (Blue)
Feature
FLOW-THRU PARTS BRUSH WITH TUBE+180 DEGREE ROATING NOZZLE: Designed for circulating washing. Heavy-Duty grooved handle. 28-Inch (71-Centimeters) Long Tube. The flexible metal nozzle is ideally used to guide the cleaning agent to the parts which need to be cleanedHIGH FLOW PUMP: High flow parts washers pump, ability to clean all types of parts efficiently and quickly, such as screws, bearings, gaskets, suitable for all kinds of working environment, such as auto repair shop, the construction site
STURDY STEEL+ANTI-RUST COATING: Redsun parts washer cleaner were made of sturdy steel, the powder coating can resist rust and corrosion.However, we do not recommend the use of volatile solvents such as gasoline
LIGHTWEIGHT AND PROTABLE: This parts washer is light weight enough. That you can easily pack it up and move the parts washer from job site to job site or from your shop to your garage.
PERFORMANCE GUARANTEE: You can get our performance guarantee. If you have any problems with the parts you need, simply contact customer service for a replacement or refund
Description
A professional parts washer can increase the efficiency of cleaning.Redsun specializes in the production of industrial tools for many years.
During these years' period, we always concentrating on the development and production of highly efficient tools.
Redsun 3.5 gallon parts washer is probable and easy to carry.
SPECIFICATION
AMPS:0.23
Tankcapacity:5 Gallon
Solventcapacity:3-1/2Gallon
Pump Capacity: 5-1/4 GPM (19.8L/min)
Parts washer circulation flow: 0.71~ 0.87GPM (2.7-3.3 L/min)
Made of durable welding steel, powder coating,rust
Electrical requirement: 110V-120V,60Hz;220-240V,50Hz
Automatically cover when parts washers reaches a certain temperature
4. Black Bull PWP40 Parts Washer Pump
Feature
Recirculates 4.4 GPM of solventSubmersible use only
120 Volts/60 Hertz 0.23 Ampere
Replacement pump
Works with 40 gallon parts washer
Description
Parts washer pump which is 40 gallon with a universal design, recirculates 4.4 GPM of solvent submersible. Uses only 120 Volt / 60 Hertz 0.23 Ampere. Replacement pump for 40 gallon parts washer.5. Black Bull PWP20 Parts Washer Pump
Feature
Replacement pumpRecirculates 4.4 GPM of solvent
120 Volts/60 Hertz 0.23 Ampere
Submersible use only
Works with 20 gallon parts washer
Description
Parts washer pump which is 20 gallon with a universal design, recirculates 4.4 GPM of solvent submersible. Uses only 120 Volt / 60 Hertz 0.23 Ampere. Also provided with replacement pump for 20 gallon parts washer.6. ARES 70922 | Portable Parts Washer | Easily Fits 5 Gallon Buckets | for Degreasing Small Parts and Tools
Feature
SPECIFICATIONS: Our portable parts washer is designed to easily fit your favorite 5 Gallon Bucket. It's perfect for degreasing small parts and tools and features a hard bristle brush for your toughest jobs and a unique channel drainage system to easily catch waste material.PORTABLE: This parts washer is extremely lightweight and can be easily packed up and moved from job site to job site or from your shop to your garage. The pump sits at the base of the 5 Gallon Bucket and makes cleaning your parts and tools a breeze!
VERSATILE: This parts washer is safe for use with any non-corrosive, water based cleaning solution, so you can get the job done now!
RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES Portable Parts Washer, simply contact customer service for troubleshooting help, parts, replacement, or refund.
ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization.
Description
Lightweight and Portable
The ARES Portable Parts Washer is designed to easily fit into any 5 gallon bucket, and thanks to its lightweight, portable design, you can take it with you and use it nearly anywhere. This washer comes with a hard bristle brush, so it's perfect for degreasing small parts and tools, even when the job is extra tough. Thanks to the unique channel drainage system, the washer easily catches waste material and works with any non-corrosive, water based cleaning solution.
Features:
- Includes 1 pc. Portable parts washer with Hard bristle brush
- Fits 5 gallon buckets
- Unique channel drainage system catches waste material
- Lightweight and portable
- Safe for use with any non-corrosive, water based cleaning solution
- Ideal for degreasing small parts and tools
7. JEGS 81526 Portable 5 Gallon Parts Washer
Feature
5 GallonSolvent Capacity: 3.5 Gallon
110V/60Hz
Overall Size: 17.375" L x 14.25" W x 8.75" H
Max Pump Output: 3.96 gpm
Description
Portable Parts Washer8. Torin Big Red Steel Cabinet Parts Washer with 110V Electric Pump, 3.5 Gallon Capacity
Feature
Compact steel cabinet parts washer great for small parts cleaning jobs including wheel bearings, gears, and carburetors3.5 gallon fluid reservoir capacity with a 325 gallon per hour electric pump; Pump is 110 V and recycles at 1/2 gallon per minute
Durable, steel construction; Work basin dimensions are 18" wide by 13.5" deep and 9" high
Unit is approved for use with mineral spirits and biodegradable cleaners
Not for use with high volatile, flammable or combustible solvents
Description
The Torin Big Red steel cabinet parts washer has a compact size with a 3.5 gallon fluid reservoir capacity and a 325 gallon per hour electric pump. The 110V electric pump recycles at 1/2 gallon per minute. The super handy bench top washer fits almost anywhere and is great for small parts cleaning jobs, including wheel bearings, gears, and carburetors. This unit is approved for use with mineral spirits and biodegradable cleaners. The cabinet has a durable, steel construction and is UL/CSA approved. The steel work basin is 18" wide by 13.5" deep and 9" high. The lid includes a fusible link for fire safety.9. Little Giant 1-YS (501020) Parts Washer Pump 1/150 HP, 115V, 6' cord
Feature
Little Giant MCT-5P Coolant Unit PumpDescription
Little Giant 1-YS (501020) is a 1/150 HP cast aluminum submersible oil-filled Parts Washer Pump. The Little Giant 1-YS has double-lip Viton seal and nylon volute with 1/4" MNPT discharge. This Pump is for use with stoddard solvent and deodorized kerosene submerged parts washer applications only.6' power cord without plug has "Master Builders" conduit fitting at pump housing for mounting.For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously they have a closed cup flash point not lower than 100F. Thermally protected.10. Goplus 20 Gallon Automotive Parts Washer Cleaner Heavy Duty Electric Solvent Pump
Feature
Stable And DurableMade of high strength carbon steel, welded integrated tank-type construction, powder coated finish, resist rust and corrosion, ensures it's long-last serving life-span. 20 gallon water capacity, suitable for cleaning medium-sized parts. Self standing design, fixed supporting foot, add it's stability.Electric Automotive Parts WasherUses enclosed electric submersible pump, automatic solvent circulating rinse and flexible spigot, labor saving, makes engine parts wash much easier and thoroughly. High flow pump circulates solvent at 4-2/5 gallons per minute. Max water lift capacity of 6ft.
Automatic Closed Lid In Case Of FireCE and GOSH approved grade. internal fire safety device. Features heat resistant lid with fusible link, automatically closes to prevent fire accident. And a considered switch water shield, ensures safety.
Variety Washing Container Size20 gallon tank with removable shelf for bigger parts. Also comes with a small washing basket for small parts. Must use a water-based non-corrosive solvent.
UtilityBoth household and commercial use available. Includes an extra storage shelf. Easily assembled and then start to use. A must have for car maintenance and service, garage and so on.
Description
This is our 20 Gallon Parts Washer,which is suitable for professional cleaning of large parts and assemblies.Feature
20 gallon parts washer
For Cleaning or Washing Automotive Engine Parts with Solvent
Comes with Flexible Spigot
All Steel Construction
Assembly required
Only suit for water-based solvents
Specifications
Voltage:120V
Frequency:60hz
Power:43W
Max pump output:318GHP
Tank capacity:20GAL
Overall dimensions:30.7"x21.25"x34.65"(LxWxH)
Minimum Solvent Capacity: 5 Gallons
Maximum Solvent Capacity: 12 Gallons