Finding the best wrist video monitor suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Finding the best wrist video monitor suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best wrist video monitor
1. WSDCAM 4 inch Portable Wrist IP Camera Tester CCTV Tester 4K H.265 IP CVBS CVI TVI AHD Analog Camera Tester with POE/IP Discovery/Rapid ONVIF/Firmware Update/Camera Test Report 1800ADH-Plus
Feature
8MP TVI/4MP CVI/5MP AHD/CVBS/4K H.265 IP, support Dahua, Hikvision, Axis etc ONVIF camera testH.265/H.264, 4K video display via mainstream
3.DC12V 3A, DC48V PoE power output.Rapid ONVIF, auto view video and create testing report
10/100/1000M Ethernet,network state and traffic display. Innovative coaxial HD focus, video signal quality test
Wrist design, portable and easier to carry. We provide 12 months warranty and free lifetime customer service & tech-support, if any question, just email us
Description
The 4 inch IPS touch screen IP camera tester is designed for maintenance and installation of IP analog, HD coaxial cameras as well as other security equipment. The 800*480 resolution enables it to display network HD cameras and analog cameras in high resolution. The unit supports many ONVIF PTZ and analog PTZ control. CCTV installers often need to carry a variety of testing tools to complete their work. If take the all in one camera tester, making working conditions safer and increasing productivity.You can use this IPC tester to do:
CCTV system installation and maintenance
Network cabling project installation and maintenance
Dome camera, 4K H.265 IP camera testing
Video transmission channel testing
PTZ controller
Feature:
4 inch touch screen, 800*480 resolutions
H.265 & H .264 IP, 4K video display via mainstream
Rapid ONVIF, display image, create testing report
8MP TVI/4MP CVI/5MP AHD
CVBS camera test and PTZ control
IPC TEST (Non-ONVIF test), HIK test tool (Hikvision camera), DH test tool (Dahua camera)
IP discovery, just by one key to detect all network cameras IP address
Rapid video, just by one key to detect all network cameras and auto display
DC12V 3A power output
PoE DC48V power output, Max power 24W
Innovative coaxial HD focus, video signal quality test
Self -update software, you can install apps with android version
PTZ control supports more than 30 protocols such as PELCO-P, PELCO-D, and SAMSUNG
Audio in, support record and save the audio/LED lamp, calculators, music players
7.4 V /2400mAh Lithium Polymer Battery, lasts about 8 hours
Dimension/Weight: 126x83x33mm/ 0.3kg
Package
1x CCTV Camera Tester
1x Lithium Polymer Battery
1x Adaptor DC12V/1A
1x Power Cable
1x BNC Cable
1x RS485 Cable
1x Audio Cable
1x Screen Protector
1x Tool Bag
1x Wrist Wrap
2. 4.3 Inch Wrist CCTV Tester, ZUEXT 4 in 1 1080P Portable Camera Tester AHD TVI CVI CVBS Tester TFT LCD Monitor Analog Video Test Cable Test PTZ Control 12V Power Output
Feature
4.3 INCH 4 IN 1 CCTV CAMERA TESTER: ZUEXT hybrid camera tester is able to test and debug coaxial 720P/960P/1080P AHD camera / TVI camera / CVI Camera / traditional CVBS analog camera like 960H 1000tvl 1200tvl Cameras; The LCD screen video monitor with 1080P high definition can show clear image when troubleshooting a security camera system.LONG WORK TIME: Built in 3.7V 2600mAh Rechargeable Lithium battery, each 4 hours recharge lasts 6-7 work hours. DC 5V 1A power adapter also supplied for charging.
PTZ CONTROL: Compatible with multiple PTZ protocols(PELCO-D / PELCO-P etc.); baud rate: 1200, 2400, 4800, 9600, 19200 (optional), zooms in/out the lens, adjusts the focus, aperture/sets/calls the preset position, PTZ continuing rotate test.
APPLICATION: Powerful to test UPT/LAN cable, measure the connecting status, display the sequence of connection and the NO. of the LAN cable, inspect camera quality, correct faraway installation, etc.
PORTABLE DESIGN WITH 2 YEARS FREE WARRANTY: Palm size, wrist ban wear, easy to carry with and operate.
Description
ZUEXT CE FCC Certified 4-in-1 CCTV Camera tester can work with 720P/960P/1080P Coaxial AHD Camera, TVI camera and CVI Camera, 960H/1000tvl/1200tvl traditional analog Camera from brands: HIKVISION, Q-see, Swann, ZOSI, Night Owl, Zmodo, ANNKE, Samsung, Amcrest, JOOAN, etc.
Overview:
1. Best cost effective equipment for camera installation and inspection
2. User can check the details of camera video during the process of installation
3. 12V 1A output function can be helpful when no external power supply for the camera
4. Built-in rechargeable 3.7V 2600mAh Lithium battery, each 4 hours recharge lasts 7 working hours
5. Auto identify NTSC/PAL format camera image signal
6. Network cable test
7. RS485 Interface with PTZ control
8. Through DC power out enables user to inspect; correct camera or confirm installation. It's convenient for video equipment that helps communication with clients during installation.
Specifications:
Product Type: 4.3 inch Color LCD Portable CCTV Camera Monitor Tester
Image Resolution: 1920*1080 (1080P, 2.0MP)
Video Input: 1CH BNC
Support Audio Test: input audio signal and play on the internal speaker
LCD Brightness/Contrast/Color Saturation are adjustable
PTZ Protocol: Supports more than 20 PTZ protocols (PELCO-P, PELCO-D, SAMSUNG etc.) Multi-interface and Multi-baud rate: Support RS232 ,RS485 and RS422 interface; baud rate ranging from 150 to 19200bps
PTZ address scanning, search up the ID of PTZ camera
System Format: PAL/NTSC Automatically recognize
OSD Language: English / Russian/ Deutsch/ Espanol/ Portugal/ Italian
Working Temperature: -20C ~ 70C
Dimension: 4.7" x 3.1" x 1.6" inch
Weight: 150g
Package:
1x Portable CCTV Camera Tester
1x Built-in 2600mAh Lithium Battery
1x 5V 1A Adapter
1x Wrist Strap
1x Micro USB Cable
1x A/V Cable
1x Power Output Cable
1x Manual
3. Eoncore Portable Wrist 4.3" 720P 1080P TVI CCTV Camera Cam Video Test Monitor Tester 12V-Out (AHD+TVI+CVBS+CVI)
Feature
4 in 1 CCTV Tester, support CVBS/TVI/CVI/AHD cameraPalm size, easy to carry and operate
With ADSL detection function
Terminal and DC power supply
Built-in 2600mA Lithium-ion battery with cable testing, analog video test, LED emergency lighting
Description
Specification:Video test
Video System: NTSC/PAL Automatically recognize
Video Level: 1VPP
Display Screen: 4.3 inch LCD 480 * RGB * 272 (QVGA) resolution, 64K color
Screen adjustment: Video display brightness, contrast, color saturation adjustable, LCD backlight brightness adjustable
Video Input / Output: 1 channel BNC Video IN
HD AHD TVI Test
SD Signal Format: NTSC,PAL
Video Signal: HD AHD,TVI,CVI,CVBS
Resolution: D1,720P,960p,1080P (MATC-IV7)/
D1,720P,960p,1080P,3MP,4MP,5MP (MATC-IV7W)
MAX Support 5MP,4MP AHD 20FPS ; 5MP 4MP TVI 20FPS
Signal Level: 1Vpp
12V Power Output
Power output: Temporary Power Output 12V 1A DC
1 x USB 5V 1A Output
Audio Test
Audio Test: Input audio signal, and played on the internal speaker
Power supply
External Power Supply: DC 5V2A
Battery-powered: Built-in 3.7V li-polymer battery, Capacity 2600mAh
Charge: Charge time 3-4 hours Battery power time 8 hours
Power Saving Features: Low power consumption, automatic power off, Real-time display of battery level
System Settings
Auto Power Off: Disable / 5-60 minutes
Cable Test
Cable Test: Test any two or more wire cable Display connect sequence and remote number
LED Light: 1*35lm LED light
Working environment: -20---+70/30%-90%Rh
Package Included:
1 x HD AHD+TVI+CVI+CVBS CCTV Tester
1 x AC/DC Adapter
1 x Power Output Cable
1 x Transformer
1 x A/V Cable
1 x Video Cable
1 x Date Cable
1 x Wristbands
4. SGEF CCTV Tester 2-in-1 Portable Camera Tester AHD Analog Tester 4.3-inch LCD Monitor Wrist Video Test Cable Test PTZ Control 12V Power Output Audio Tester (IV7A)
Feature
4.3" high image resolution monitor enable to show clear image that fits any place to useIt Supports 720P & 960P & 1080P AHD cameras, and analog Cameras (TVI/CVI/IP cameras are not supported)
Support RS485, compatible with Pelco-D/P PTZ control protocol. Baud and address can be set.
Display UTP cable connection status, cable type and the sequence of wires as well as read the number of the test box
It has built-in 2600mA Lithium-ion battery , LED emergency lighting, and 12V/1A power output
Description
IV7A tester is simple in design, easy to operate and easy to carry, making it easy for Central TV technicians or installers to install and maintain CCTV systems and increase productivity by reducing field timeCCTV TESTER 4.3-inch TFT LCD Screen 2 in 1 PRO CCTV Tester Hybrid camera tester is able to test and debug coaxial 720P / 960P / 1080P AHD camera and traditional CVBS analog camera with video display, DC 12v output power, Audio test, and multilingual OSD; The LCD screen video monitor with high resolution can show clear image when troubleshooting a security camera system
PTZ CONTROLSupport RS485,Compatible with multiple PTZ protocols (PELCO-D / PELCO-P etc.); baud rate: 1200, 2400, 4800, 9600, 19200 (optional), zooms in/out the lens, adjusts the focus, aperture/sets/calls the preset position, PTZ continuing rotate test
APPLICATION Powerful to test UPT/LAN cable, measure the connecting status, display the sequence of connection and the NO. of the LAN cable, inspect camera quality, correct faraway installation, etc. The brightness and contrast and color saturation can be adjusable,It also can be used for charging mobile phone
LONG WORK TIME Built in 3.7V 2600mAh rechargeable Lithium battery with UTP cable testing, analog video test, LED emergency lighting; Each 4 hours recharge lasts 6-7 work hours. DC 5V 1A power adapter also supplied for charging
Product Accessories:
Portable Wrist Band 4.3 inch LCD Monitor CCTV Camera Tester
2600mAh Lithium Battery (Built-in)
5V 1A Adapter
Wrist Strap
BNC Video Cable
Micro USB Cable
A/V Cable
Power Output Cable
5. Flysight FPV Watch 5.8Ghz Receiver Watch Wireless 32 CH HD 2inch LCD Monitor Real-time RC Drone FPV Wearable Watch 960 x 240 Video Display for RC Helicopter Face Quadcopter as Back Up FPV
Feature
[Perfect Accessory] Wearable receiver watch, can be used as a monitor watch to view pin hole camera transmitting on 5.8 Ghz super convenient for using and looks really cool[High Definition] With 960*240 resolution and 2 inch LCD display, good enough to read the data on the screen
[No Wait ] Achieve real-time sharing of aerial video images, interactive, high playability, suitable for parent-child interaction.
[Stable Performance ] Built-in 3dBi copper tube 5.8G antenna, the transmission distance is far, Image transmission zero time delay
[Power by ] Built in 500MAH lithium battery, with USB charging line, convenient charging, use time of up to 100 minutes
Description
Features:1. Wearable receiver watch, super convenient for using and looks really cool
2. With 2 inch LCD screen, good enough to read the data on the screen 3. Real-time transmission
Item name: 5.8G Watch Reciever
Charge current: 320mA @ 3.7v (max)
Charge time: About 90mins
Service time: About 100mins
Receive distance: About 60m
Channel: 32CH
LCD screen: 2 inch
LCD screen resolution: 960*240
View angle: 140/120(horizontal/vertical)
Antenna: Built-in 3dBi copper tube 5.8G antenna
Power button: Start up or shutdown
CH button: Long-press for adjusting frequency response ABEF, short-press for adjusting channels 12345678
Channel lights: Indicating the current channel ( e.g. the corresponding red lights will turn on when it is in E1 )
Charge port: 5V micro USB ( only for charging )
Package weight: 180g
Color: Black
Package included:
1 x 5.8G Watch Reciever1 x Manual
1 x USB
6. KKmoon CCTV Tester 3.5" TFT Color LED Wrist Strap Security Camera Tester with Recharge Battery for Surveillance Audio Video Input
Feature
This security tester is designed for testing the surveillance camera. The security tester can be attached to the surveillance camera in site. Additionally, it could be used as a power supply of 12V temporarily. The wrist strap design is humanized for convenient use3.5-inch TFT LED display screen, automatically identify and adapt PAL/NTSC standard,Adjustable brightness of screen, 5V USB charging and low power warning. Audio and video input
Built-in 3.7V 2200mAh Lithium battery, the work time can reach almost 8 hours.
12V 0.5A output power, can be used as a power supply for a camera temporarily. Audio testing function, testing voice of the front end device is normal or not.
If there is no video, it would turn to sleep mode after 3 minutes then you can switch in video to wake it up.
Description
This security tester is designed for testing the surveillance camera. The security tester can be attached to the surveillance camera in site. Additionally, it could be used as a power supply of 12V temporarily. The wrist strap design is humanized for convenient use.Specifications:
Color: Black
Material: ABS
Screen: 3.5" TFT
Resolution: 320 * 240
Battery: 18650 DC3.7V 2200mAh Lithium battery
Power Consumption: 1W
Charger: AC 110-220V 5V/1000mA
Video Standard: PAL/NTSC
Video Input: 1.0Vp-p
Power Output: 12V/500mA
Audio: 0.7Vp-p
Working Temperature: 5~50
Wrist Strap Length: Approx. 26.5cm / 10.43in
Power Cable Length: Approx. 80cm / 31.5in
AV Cable Length: Approx. 115cm / 45.3in
Monitor Size: 90 * 70 * 40mm / 3.54 * 2.76 * 1.57in (L * W * H)
Monitor Weight: 150g / 5.3oz
Package Size: 19 * 9 * 6.5cm / 7.48 * 3.54 * 2.56in (L * W * H)
Package Weight: 347g / 12.26oz
Package List:
1 * 3.5" Security Tester
1 * Adapter
1 * Power Cable
1 * Wrist Strap
1 * AV/DC Cable
1 * BNC Converter
1 * User Manual (English)
7. 4 in 1 CCTV Camera Tester Monitor, JZTEK Security Video Monitor Tester Support 720P/1080P/3.0mp/4.0mp/5.0 Megapixel AHD, TVI, CVI & CVBS Analog Camera with 4.3 inch LCD Screen, UTP Cable Tester
Feature
4.3 INCH 4 IN 1 CCTV TESTER: JZTEK hybrid camera tester is able to test and debug coaxial 1080P AHD camera/ TVI camera/ CVI Camera/ traditional CVBS analog camera like 960H 1000tvl 1200tvl; The LCD screen video monitor with 960P high definition can show clear image when troubleshooting a security camera system.LONG WORK TIME: Need 3.7V 2600mAh Lithium battery (Not included), each 4 hours recharge lasts 6-7 work hours. DC 5V 1A power adapter also supplied for charging.
PTZ CONTROL: Compatible with multiple PTZ protocols(PELCO-D / PELCO-P etc.); baud rate: 1200, 2400, 4800, 9600, 19200 (optional), zooms in/out the lens, adjusts the focus, aperture/sets/calls the preset position, PTZ continuing rotate test.
APPLICATION: Powerful to test UPT/LAN cable, measure the connecting status, display the sequence of connection and the NO. of the LAN cable, inspect camera quality, correct faraway installation, etc.
PORTABLE DESIGN WITH 1 YEAR FREE WARRANTY: Palm size, easy to carry and operate.
Description
OverviewBest cost effective equipment for camera installation and inspection
User can check the details of camera video during the process of installation
12V 1A output function can be helpful when no external power supply for the camera
rechargeable 3.7V 2600mAh Lithium battery, each 4 hours recharge lasts 7 working hours
Auto identify NTSC/PAL format camera image signal
Network cable test
RS485 Interface with PTZ control
Through DC power out enables user to inspect; correct camera or confirm installation. It's convenient for video equipment that helps communication with clients during installation.
Specifications:
Product Type: 4.3 inch Color LCD Portable CCTV Camera Monitor Tester
Image Resolution: 480*272 (960P, 1.3MP)
Video Input: 1CH BNC
Support Audio Test: input audio signal and play on the internal speaker
LCD Brightness/Contrast/Color Saturation are adjustable
PTZ Protocol: Supports more than 20 PTZ protocols (PELCO-P, PELCO-D, SAMSUNG etc.) Multi-interface and Multi-baud rate: Support RS232 ,RS485 and RS422 interface; baud rate ranging from 150 to 19200bps
PTZ address scanning, search up the ID of PTZ camera
System Format: PAL/NTSC Automatically recognize
OSD Language: English / Russian/ Deutsch/ Espanol/ Portugal/ Italian
Working Temperature: -20??C ~ 70??C
Dimension: 4.7" x 3.1" x 1.6" inch
Weight: 150g
Package Include:
1 X JZTEK 4.3 inch LCD Monitor CCTV Camera Tester 5 Megapixel Portable Wrist Band
1 x2600mAh Lithium Battery(Not included)
1x 5V 1A Adapter
1 x Wrist Strap
1x Micro USB Cable
1x A/V Cable
1 x Power Output Cable
1x user manual
8. ZOTER CCTV AHD Camera Wrist Tester Video Audio Test 4.3" LCD Monitor
Feature
Portable Product Mainframe: Portable product is able to use in any place and any time. It is easy to hold and do not need complicated equipment that hiders the inspecting and repairing.Monitor: 4.3" high image resolution monitor enable to show clear.
Long Work Time: Equips with lithium battery of high capability. each 4 hours recharge durables 6-7 work hours.
Humanized Design of Appearance: Hand-hold design for professionals. easy operation without taking off gloves speeds your works. clasp ring at bottom fits to all chains and use in all environments.
Application: camera quality inspection; image of installation correcting; inspect and repair of monitor system circuit......etc.
Description
Product Reference: CCTVA-PCT-IV7A
Specifications:
Best system equipment for installing and inspecting engineering
Classic series, highly equipped, the most cost effective choice
Palm size, easy to carry and operate
User can check the details of camera video during the process of installation
12V 1A output function can be helpful when no external power supply for the camera
Video test automatically identification with access AHD video signal
Automatic identification NTSC/PAL format image signal
Network cable test
RS485 Interface
Built-in 3.7V 2600mAh Lithium battery
Through DC power out enables user to inspect; correct camera or confirm installation. It's convenient for video equipment that helps communication and discussion with clients during installation process
Please notice this tester do not supports TVI or CVI Camera
Technical Information:
Product Type: Portable CCTV Camera Monitor Tester
Display: 4.3 inch Color LCD
Image Resolution: 480*272
Support: Analog CCTV Camera, AHD Camera
Video In: 1 channel BNC input
Audio Test: Support, input audio signal and played on the internal speaker
PTZ Protocol: Compatible with PELCO-D/P
System Format: PAL / NTSC Automatically recognize
Language: English / Russian / Deutsch / Espanol / Portugal / Italian
External Power: DC 5V 1.0A Adapter
Charge time: 4 hours
Battery working time: 7 hours
Humidity: 30% ~ 90% Rh
Working Temperature: -20C ~ 70C
Dimension: approx. 120 x 80 x 40 mm / 4.7" x 3.1" x 1.6" inch
Weight: 200g
Package includes:
1 x Portable CCTV Camera Monitor Tester
1 x Wrist Strap
1 x BNC Video Cable
1 x Micro USB Data Cable
1 x User Manual (English)
9. 4 in 1 CCTV Tester Support 720P/1080P/3.0mp/4.0mp/5.0 Megapixel AHD, TVI, CVI & CVBS Analog Camera, Security Video Monitor with 4.3 inch LCD screen 12V 1A Cable Tester
Feature
The new AHD/TVI/CVI/CVBS Camera tester is developed for AHD/TVI/CVBS camera device, with Video display, DC12v output power, Audio test, 480*272 resolution, and multilingual OSDIt Supports 720P & 960P & 1080P & 3mp & 4mp & 5mp AHD/TVI cameras, and 3mp/4mp HD CVI Cameras
It has built-in 2600mA Lithium-ion battery with UTP cable testing, analog video test, LED emergency lighting, and 5V/1A emergency power output for power supply
The brightness and contrast and color saturation can be adjusable,It also can be used for charging mobile phone.
The new tester designed with easy operation and portability makes it simple for a cctv technician or installer to install and maintain CCTV systems, improving work efficiency by reducing time in the field
Description
Description:Equipped with 2600mAh Li-polymer battery, which has RoHS & CE certification
Device can work 7 hours after a single charge
12V 1A Output function can be helpful when no external power supply for the camera
Video test Automatically identification with access AHD/TVI/CVI/CVBS Video signal
Automatic identification NTSC/PAL Format image signal
2600mAh li-polymer battery
High capacity li-polymer battery, charge time 4 hours, and work time 11 hours
DC12 1A power output
Provide camera power temporary
Network Cable test
Power saving features:
Low power consumption, automatic power off, Real-time display of battery level
Language settings: Chinese, English user selectable
Auto power off: Disable / 5-60 minutes
Specification:
Video System: NTSC/PAL Automatically recognize
Display screen: 4.3inches
Display screen Resolution: 480*272P resolution
Screen adjustment: Video display brightness, contrast saturation adjustable
Video input: 1 channel BNC Video IN
12V power output 1A DC: Audio test
Input audio signal, and played on the internal speaker
External power supply: DC 5V(1A)
Battery-powered: Built-in 3.7V li-polymer battery, Capacity 2600mAh
Charge time: 4hours
Battery working time 7 hours
Working Temperature: -20C---+70C
Humidity: 30%-90% Rh
Dimension: 120mm x 80mm x 40mm,150g
Package Included:
1 x Main unit
1 x Transformers
1 x AHD power cord
1 x English manual
1 x Video cable
1 x Data cable
Note: This model can't support PTZ contorl,if you need this function
10. 5 In 1 CCTV Tester Support Upt to 4K IP Camera & 720P/1080P/3.0mp/4.0mp/5.0 Megapixel AHD, TVI, CVI & CVBS Analog Camera, Security Video Monitor with 4" touch screen, POE out, Wifi Test, Onvif, PTZ
Feature
5 In 1 Tester Support Up to 8MP TVI/4MP CVI/5MP AHD Cameras test, Support H.265 & H .264 Up to 4K IP Camera test, Support CVBS camera test and PTZ control,Rapid ONVIF, Auto log in and display image, create testing report, Support AXIS, Hikvision camera test, enter ONVIF app, input username and password to test, With IPC TEST (Non-ONVIF test), HIK test tool (Hikvision camera), DH test tool (Dahua camera),IP discovery, just by one key to detect all network cameras IP address,Rapid video, just by one key to detect all network cameras and auto display
DC12V 3A power output, PoE DC48V power output, Max power 24W, support 10/100/1000M Ethernet test, network state and traffic display, PING test, IP address scan, port flashing etc, With Audio in, support record and save the audio/LED lamp, calculators, music players and other application tools
4 inch touch screen, 800*480 resolutions, Wrist design, portable and easier to carry, 7.4 V /2400mAh Lithium Ion Polymer Battery, after 4~5 hours charging, working time lasts about 8 hours
Description
Overall:The 4 inch IPS touch screen IP camera tester is designed for maintenance and installation of IP analog, HD coaxial cameras as well as other security equipment. The 800*480 resolution enables it to display network HD cameras and analog cameras in high resolution. The unit supports many ONVIF PTZ and analog PTZ control. the all in one camera tester can make a safer working conditions and increase productivity.
Features:
*4 inch touch screen, 800*480 resolutions
*H.265 & H .264 IP, 4K video display via mainstream
*Rapid ONVIF, Auto log in and display image, create testing report
*AXIS, Hikvision camera test, enter ONVIF app, input username and password to test
*8MP TVI/4MP CVI/5MP AHD
*CVBS camera test and PTZ control
*IPC TEST (Non-ONVIF test), HIK test tool (Hikvision camera), DH test tool (Dahua camera)
*IP discovery, just by one key to detect all network cameras IP address and auto display
*DC12V 3A power output
*PoE DC48V power output, Max power 24W
*Innovative coaxial HD focus, video signal quality test
*10/100/1000M Ethernet, network state and traffic display
*Wrist design, portable and easier to carry
*Network tool: PING test, IP address scan, port flashing etc
*Drop-down menu, can select Poe power, IP setting, CVBS, LAN info etc
*Self -update software, you can install apps with android version
*Media player, 4K video files and MKV/MP4 media files play
*PTZ control supports more than 30 protocols such as PELCO-P, PELCO-D, and SAMSUNG
*Audio in, support record and save the audio/LED lamp, calculators, music players and other application tools
*7.4 V /2400mAh Lithium Ion Polymer Battery, after 4~5 hours charging, working time lasts about 8 hours
Packing List:
1) Tester
3). Adaptor DC12V/1A
4) 1pcs Battery 5). Tool bag / DC12V Power cable/BNC cable/ RS485 cable/ Audio cable