Finding the best lifter kit for a 2011 denali suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Finding the best lifter kit for a 2011 denali suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best lifter kit for a 2011 denali
1. Supreme Suspensions - 3.5" Front + 3" Rear Lift Kit with Spring Compressor Tool for [2007-2019 Tahoe + Suburban 1500 + Yukon 1500] and [2007-2013 Avalanche 1500]
Feature
FITMENT: [2007 - 2019 Chevy Tahoe], [2007 - 2019 Chevy Suburban 1500], [2007 - 2019 GMC Yukon 1500], [2007 - 2013 Chevy Avalanche 1500]. Will only fit 6-lug models. Does Not work with Automatic Load-Leveling Suspension. Not compatible with: Yukon Denali models equipped with ARC suspension and Suburban, Yukon and Tahoe models with auto-ride or with airbags.CONTENTS: 2x Front Upper Mount Strut Spacers, 2x Front Lower Mount Strut Spacers, 2x Rear Spring Spacers, 1x Coil Spring Compressor Tool, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack
TECHNICAL NOTES: 3.5" Front Suspension Lift and 3" Rear Suspension Lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. An alignment is recommended after install.
BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Description
Supreme Suspensions - 3.5" Front Lift Kit and 3" Rear Lift KitThis lift kit is precision engineered to provide a 3.5 inch front and 3 inch rear suspension leveling lift. It improves the look of your vehicle and provides for a more impressive stance, allowing you to fit larger custom rims and tires. Supreme Pro-Billet Series front upper mount strut spacers and rear coil spring spacers are precision CNC machined from solid blocks of T6 Aircraft Billet and receive a special anodized coating. The front lower mount strut spacers are crafted from high crystalline Delrin and guaranteed to withstand even the most extreme driving conditions. Included in this kit is a Coil Spring Compressor Tool to allow for easy removal and reinstallation of your springs. This tool features a maximum opening of 12" and comes with all necessary hardware to safely secure it to the spring assembly.
Please note: Compressing your springs can be VERY dangerous. Using the included Safety Catch Plates is a critical step in preventing the spring from causing injury or damage to your vehicle.
FITMENT
2007 - 2019 Chevy Tahoe
2007 - 2019 Chevy Suburban 1500
2007 - 2019 GMC Yukon 1500
2007 - 2013 Chevy Avalanche 1500
Not compatible with models equipped with Automatic Load-Leveling Suspension and 2019 DENALI models equipped with ARC suspension.
Does not fit Suburban, Tahoe and Yukon models with auto-ride or with airbags.
CONTENTS
2x Front Upper Mount Strut Spacers
2x Front Lower Mount Strut Spacers
2x Rear Spring Spacers
1x Coil Spring Compressor Tool
Installation Hardware + Instructions
Pro Pack
TECHNICAL NOTES
Front Lift: 3.5 Inches / Front Spacer Thickness: [Upper Mount - 1.5 Inches], [Lower Mount - 0.5 Inches]
Rear Lift: 3 Inch
(Please note that front spacer thickness to lift height is NOT a 1:1 ratio.)
2. Supreme Suspensions - Full Lift Kit for 2007-2019 Chevrolet Tahoe 3" Front Lift Strut Spacers + 3" Rear Lift Spring Spacers (Silver)
Feature
FITMENT: 2007 - 2019 Chevy Suburban 1500 (2WD 4WD), 2007 - 2019 Chevy Tahoe (2WD 4WD), 2007 - 2019 GMC Yukon 1500 (2WD 4WD) and 2007 - 2013 Chevy Avalanche 1500 (2WD 4WD). Will only fit 6-lug models. Not compatible with 2019 Denali models equipped with ARC suspension. Does NOT Fit vehicles equipped with MagneRide / Auto-Ride / Air-Ride / Self-Leveling Suspension Systems.CONTENTS: (2x) T6 Billet Aluminum Front Strut Spacers, (2x) T6 Billet Aluminum Rear Spring Spacers, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack.
TECHNICAL NOTES: 3" front and 3" rear suspension lift. Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is recommended after install.
BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Description
3" FRONT + 3" REAR LIFT KITEnhance the look of your vehicle and run larger tires with Supreme Suspension's front and rear lift kit. Developed and rigorously tested by in-house ASE certified specialists, this set of front strut and rear spring spacers are precision CNC machined from T6 aircraft-grade billet and will never compress under heavy loads. A special coating is applied to protect against the elements and offers premium resistance to corrosion. If you're looking to level the stance of your truck, fit larger wheels and tires or pick up some ground clearance out on the trails, we have a kit tailored specifically to your truck and your needs.
FITMENT:
2007 - 2019 Chevrolet Suburban 1500 (2WD 4WD)
2007 - 2019 Chevrolet Tahoe (2WD 4WD)
2007 - 2019 GMC Yukon 1500 (2WD 4WD)
2007 - 2013 Chevrolet Avalanche 1500 (2WD 4WD)
Not compatible with 2019 DENALI models equipped with ARC suspension.
Does NOT Fit vehicles equipped with MagneRide / Auto-Ride / Air-Ride / Self-Leveling Suspension Systems or non-airbag models.
CONTENTS:
(2x) T6 Billet Aluminum Front Strut Spacers
(2x) T6 Billet Aluminum Rear Spring Spacers
Installation Hardware
Installation Instructions
Supreme Suspensions Pro Pack
INSTALLATION
Easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is recommended after install.
TECHNICAL NOTES
Front Lift: 3 Inches*
Rear Lift: 3 Inches
*Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
3. NewYall Pack of 16 Hydraulic Roller Valve Lifter
Feature
Fits GM LS2, LS3, LS7 engines.Description
Fits GM LS2, LS3, LS7 engines.4. Supreme Suspensions - Full Lift Kit for 2007-2019 Avalanche Suburban Tahoe Yukon 1500 3.5" Front Strut Spacers + 3" Rear Spring Spacers
Feature
FITMENT: 2007 - 2019 Chevy Suburban 1500 (2WD 4WD), 2007 - 2019 Chevy Tahoe (2WD 4WD), 2007 - 2019 GMC Yukon 1500 (2WD 4WD) and 2007 - 2013 Chevy Avalanche 1500 (2WD 4WD). Will only fit 6-lug models. Does Not work with Automatic Load-Leveling Suspension. Not compatible with: Yukon Denali models equipped with ARC suspension and Suburban, Yukon and Tahoe models with auto-ride or with airbags.CONTENTS: (2x) T6 Billet Aluminum Front Upper Mount Strut Spacers, (2x) High-Density Delrin Front Lower Mount Strut Spacers, (2x) High-Density Delrin Rear Spring Spacers, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack.
TECHNICAL NOTES: 3.5" front and 3" rear suspension lift. Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is recommended after install.
BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Description
3.5" FRONT + 3" REAR LIFT KITEnhance the look of your vehicle and run larger tires with Supreme Suspension's front and rear lift kit. This set of front strut spacers is precision CNC machined from T6 aircraft-grade billet and will never compress under heavy loads. A special coating is applied to protect against the elements and offers premium resistance to corrosion. The lower mount strut spacers and rear spring spacers are CNC machined from Delrin and offer exceptional stiffness and durability. It has the highest tensile strength of any thermoplastic and suitable for any heavy duty applications. If you're looking to level the stance of your truck, fit larger wheels and tires or pick up some ground clearance out on the trails, we have a kit tailored specifically to your truck and your needs.
FITMENT:
2007 - 2019 Chevrolet Suburban 1500
2007 - 2019 Chevrolet Tahoe
2007 - 2019 GMC Yukon 1500
2007 - 2013 Chevrolet Avalanche 1500
Not compatible with models equipped with Automatic Load-Leveling Suspension and 2019 DENALI models equipped with ARC suspension.
Does not fit Suburban, Tahoe and Yukon models with auto-ride or with airbags.
CONTENTS:
(2x) T6 Billet Aluminum Front Upper Mount Strut Spacers
(2x) High-Density Delrin Front Lower Mount Strut Spacers
(2x) High-Density Delrin Rear Spring Spacers
Installation Hardware
Installation Instructions
Supreme Suspensions Pro Pack
INSTALLATION
Easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is recommended after install.
TECHNICAL NOTES
Front Lift: 3.5 Inches*
Rear Lift: 3 Inches
*Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.