Finding your suitable metal earth imperial star destroyer is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best metal earth imperial star destroyer including detail information and customer reviews. Let's find out which is your favorite one.
Finding your suitable metal earth imperial star destroyer is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best metal earth imperial star destroyer including detail information and customer reviews. Let’s find out which is your favorite one.
Best metal earth imperial star destroyer
1. Fascinations Metal Earth Star Wars Imperial Star Destroyer Metal Mod by Fascinations
Description
This amazingly detailed DIY model starts as a 4" square steel sheet and finishes as an amazing 3D model. Just use the easy to follow instructions to pop out the pieces, and bend the table, then connect them at the attachment points. Most Metal Earth models take less than an hour to assemble, and on average measure about three inches long when completed. Each model averages 8-12 pieces. All can be assembled without any glue, although tweezers or needle nose pliers to bend the tabs will save you from sore fingers. Recommended Age is 14+2. Fascinations MMS254 Metal Earth Star Wars Imperial Destroyer
Feature
Star wars imperial star destroyerIt is 3D model
Size: 11 cm x 6.4 cm
Estimated delivery time: 7-10 days to United States
Description
Star wars mmS254 star wars imperial star destroyer metal earth model kit. 20ft wire for connecting aleko gate openers (actuators) to control box.3. Metal Earth 3D Model Kits - Star Wars Set of 5 - Millennium Falcon - X-Wing - Imperial Star Destroyer - TIE Fighter - Darth Vader's TIE Fighter
Feature
Set includes 5 kits: X-Wing, TIE Fighter, Imperial Star Destroyer, Darth Vader's TIE Fighter and Millennium Falcon3D Laser-Cut Models
Remove parts from steel sheets, assemble yourself
Assemble with connecting tabs, no glue required
For ages 14 years and older
Description
These amazingly detailed DIY Models starts as 4" square metal sheets and finish as amazing 3D Models. Use the easy to follow instructions to pop out the pieces, bend the tabs, and connect them at the attachment points. Build your collection today!4. Metal Earth 3D Model Kits - Star Wars Complete Set of 8 - X-Wing - Destroyer Droid - Imperial Star Destroyer - TIE Fighter - R2-D2 - AT-AT - Millenium Falcon - Darth Vader's TIE Fighter
Feature
Complete Set Includes 8 Kits: X-Wing - Destroyer Droid - Imperial Star Destroyer - TIE Fighter - R2-D2 - AT-AT - Millenium Falcon - Darth Vader's TIE FighterMuseum Quality - Simply Pop Out the Pieces from Steel Sheets and Connect Using Tabs and Holes
Ages 14+
3D Laser Cut Models
Approximately 3.50" to 4.50" Each
Description
Needle nose pliers are helpful for assembly.Package size measures approximately 6.75" x 4.75" per kit.
5. Metal Earth 3D Model Kits - Star Wars Set of 4 - X-Wing - Destroyer Droid - Imperial Star Destroyer - TIE Fighter
Feature
Set Includes 4 Kits: X-Wing - Destroyer Droid - Imperial Star Destroyer - TIE FighterMuseum Quality - Simply Pop Out the Pieces from Steel Sheets and Connect Using Tabs and Holes
Ages 14+
3D Laser Cut Models
Approximately 3.50" to 4.50" Each
Description
Needle nose pliers are helpful for assembly.Package size measures approximately 6.75" x 4.75" per kit.
6. Metal Earth 3D Model Kits - Star Wars Set of 4 - X-Wing, Millenium Falcon, Imperial Star Destroyer and R2-D2
Feature
Metal Earth 3D Metal Model KitsStar Wars Set Includes 1 each of - X-Wing, Millenium Falcon, Imperial Star Destroyer and R2-D2
No Glue or Solder needed - But suggested to have Mini Clippers/Pliers (Not included)
From Steel Sheets to Museum Quality 3D Models
Simply pop out the pieces and connect using tabs and holes
Description
Metal Earth 3D Metal Model Kits. Star Wars Set Includes 1 each of - Imperial Star Destroyer, R2-D2, Millenium Falcon, X-Wing7. Metal Earth 3D Model Kits Star Wars Set of 6 Millennium Falcon - R2-D2 - X-Wing Starfighter - AT-AT - Darth Vader's TIE Fighter - Imperial Star Destroyer
Feature
Set Includes 6 Kits: Millennium Falcon - R2-D2 - X-Wing Starfighter - AT-AT - Darth Vader's TIE Fighter - Imperial Star DestroyerNo Glue or Solder Needed!
Ages 14+
Assembly Required
Skill Level: Moderate
Description
Needle nose pliers are helpful for assembly.Package size measures approximately 6.75" x 4.75" per kit.
R2-D2 dimensions: 2.75" x 1.97" x 1.38" when assembled.
Millennium Falcon dimensions: 2.83" x 2.20" x 1.81" when assembled.
X-Wing Starfighter dimensions: 4.01" x 3.38" x 2.05" when assembled.
AT-AT dimensions: 2.44" x 2.28" x 2.05" when assembled.
Darth Vader's TIE Fighter dimensions: 2.99" x 2.68" x 0.98" when assembled.
Imperial Star Destroyer dimensions: 4.09" x 2.36" x 2.32" when assembled.
8. LEGO Star Wars VIII First Order Star Destroyer 75190 Building Kit (1416 Piece)
Feature
Open-out top panels reveal a detailed interior, including a working elevator to Snoke's chamber with a mini hologram figure, bridge with seating for crew, and passageway leading to the control roomIncludes 5 minifigures: Supreme Leader Snoke, First Order Officer, First Order Stormtrooper Sergeant, First Order Stormtrooper and First Order Shuttle Pilot, BB-9E and buildable Medical Droid figures
Weapons include 2 blasters and 2 blaster pistols
Lift the elevator and seat Snoke in his chamber
Measures over 5in (14cm) high, 22in (56cm) long and 12in (32cm) wide
Description
Embark on galactic Star Wars: Episode VIII adventures with the First Order Star Destroyer. This huge model features armor-like panels on the outside, transparent-element engine detailing at the back and 8 side-facing stud shooters. Open out the top panels to reveal the detailed interior, featuring a working elevator leading to Snoke's command center with a seat and mini hologram figure, bridge with seating for the crew, conference area with buildable medical droid and BB-9E droid, and a passageway leading to a detailed control room. There's even a carry handle to take the play action into hyperspeed! This stellar set includes 5 minifigures and 2 droids.9. Star Wars Armada: Imperial Class Star Destroyer Expansion Pack
Feature
An Imperial starship expansion for the Star Wars: Armada miniatures gameFeatures one large-base, pre-painted Imperial-class Star Destroyer miniature
Field your Star Destroyer in battle as either an Imperial I- or Imperial II-class Star Destroyer
Eighteen upgrades include the new commander version of Darth Vader
Comes with all the dials and tokens you need to fly your Star Destroyer to battle
Description
At the height of the Galactic Civil War, the Imperial-class Star Destroyer was the commanding cornerstone of the Imperial Navy, boasting enough firepower to bring wayward systems to heel under Imperial rule. The Imperial-class Star Destroyer Expansion Pack brings this behemoth battleship to your games of Star Wars: Armada with one pre-painted miniature, two ship cards, three command dials, eighteen upgrades, and all requisite tokens. Additionally, its upgrades allow you to snare your foes with a tractor beam and fly your fleet to battle under the command of Darth Vader.10. LEGO Star Wars 75055 Imperial Star Destroyer Building Toy (Discontinued by Manufacturer)
Feature
Includes 6 with assorted weapons: Darth Vader, Imperial Officer, 2 Storm troopers, Imperial Crew and Imperial Navy TrooperAlso includes 2 new figures unique to this set: Emperor Palpating Hologram and a Mouse Droid
Weapons include 2 blaster rifles and 2 blasters
Play out classic Star Wars scenes with the Dark Lord of the Seth, Darth Vader!
Measures over 7" (19cm) high, 19" (50cm) long and 12" (33cm) wide