It’s not that easy to choose the right pin keepers gold since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top pin keepers gold on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best pin keepers gold on the marketbut dont skip to the end!
Best pin keepers gold
1. SUBANG 30 Pieces Metal Pin Backs Locking Pin Keepers Locking Clasp with Storage Case
Feature
Package Contents: 30 pieces pin back locks with small clear storage case packed to avoid locking pin backs losing; each pin sizes is approx. 1 cm in diameter and 0.7 cm in height.Quality Material: pin backs are made of quality nickel-plated copper, small and sturdy; The metal material makes it durable and colorfast, giving you an incredibly sturdy and safe experience; The small size makes it unobtrusive while maintaining stability.
Delicate Design: the pin backs match for most metal pin; Metal pin backs provides good grip of pin to keep it stay in place; Its firm and protective grip assures that you will never lose another pin.
Easy Use: these pin keepers are easy to put on and take off without a tool; Simply push to secure onto pin post while holding onto your pin to release; These locking pin backs are very smooth and prevent the skin from getting stuck injury.
Wide Applications: the metal pin back can be applied when tie tacks and lapel pins lose their back, or for homemade craft pins, suitable for brooches, name tags, display books, hanging ropes, bags, vests, hats, badges, collections, etc.
Description
Feature:
This listing is for 30 PCS Low Profile Locking Pin backs/Pin Keepers-Highest Quality, Best Available; Suitable for all pin post pins, especially for disney pins, harley pins;
Great alternative to those standard butterfly clutches and the rubber backs; These pin backs are very easy to use; No Tools Required; Just push on the pin back to the pin nail and it is locked; the harder you pull the pin, the tighter it will lock; pull the spring loaded botton at the rear, then the pin will be released ! Low Profile, smooth surface, No finger stabbing, No pin post protruding any more!
Specification:
Material:Material: nickel-plated copper
Product Size: circumference approx 15cm/5.9 inch(unstretched);
Product weight:0.04 ounces*40
Package size:3.22*2.36*0.59inches
Package weight: 2.41 ounces
Package includes:
- 40* Locking pin keepers backs
- 1* Storage case
2. 50 Pcs Metal Pin Keepers Backs, Locking Pin Keepers Backs (No Tool Required) (Gold)
Feature
Color: GoldMaterial: Zinc-plated Copper
Size: 1 cm in diameter, 0.6 cm in height
Package: 50pcs pin keeper backs with a storage case
Use: Spring loaded fastener for easier on and off, no tool required
Description
Features:Apply to display books, lanyards, bags, vests and hats.
Dimension: 1 cm in diameter and 0.6 cm in height .
Great for pins, name tags, etc.
Keep your pins safe.
Package included:
50* Pieces pin backs.
1* Storage case.
3. eBoot 30 Pieces Golden Locking Pin Keepers Backs, No Tool Required
Feature
Spring loaded fastener for easier on and off, no tools requiredSize: 1 cm in diameter, 0.5 cm in height
Fit for diameter 1.0 mm - 1.1 mm pins
Material: copper; Color: golden
Good for pins, name tags, etc.
Description
Features:
Apply to display books, lanyards, bags, vests and hats
Dimension: 1 cm in diameter and 0.5 cm in height
Good for pins, name tags, etc.
Keep your pins safe
Package includes:
30 * Pin back
4. EuTengHao 60 Pieces Pin Locks Pin Backs Locking Pin Backs Pin Keepers Locking Clasp, Locking Pin Backs Keepers(9mmx5.5mm,Gold)
Feature
Package Includes 60 locking pin keepers and 6 locking tools (micro hex tool). The color is Gold.Suitable for locking pin backs also are suitable for pins, insignia, name tags, display books, lanyards, bags, vests, hats, badge, collectibles, and so on. You can pin your badge on clothes, bags or jeans.
Perfect Size: Size of locking pin keepers are 5.5 mm in diameter, 9 mm in height and the locking tool is 4.5cm.
These bulk pin backs are made of nickel-plated copper, durable and anti-rust. Smooth surface, sturdy and lock your pins firmly, without worrying they will fall off and provide you replacement to the torn screw or wrench locking mechanism; Keep your objects in place during important moments.
How to use: Put the black screw into the middle hole, then use a small wrench to screw half of the black screw to ensure that the fixed, fixed into the brooch or medal needs to be fixed to the other two ends of any small hole, then use a wrench to tighten the black screw gradually, to ensure that the fixed.
Description
Size:locking pin keepers are 5.5 mm in diameter, 9 mm in height and the locking tool is 4.5cm. This size is perfect replacement for all locking pin backs and other places which you need.
Color:Gold
Description:Package Includes 60 locking pin keepers and 6 locking tools.
Suitable for locking pin backs are suitable for pins, insignia, name tags, display books, lanyards, bags, vests, hats, badge, collectibles and so on. You can pin your badge on clothes, bags or jeans.
Easy to use:Each pin keeper has a set screw , which is tightened to the pin post to ensure it's securely locked on. These locking pin backs are a must have if you don't want to loose your pins!
Warning:Keep away all little things from children.
5. Shapenty Gold Pins Keepers Back Metal Lock Clamps Backer Locking Clasp for Display Books, Lanyards, Bags, Badge, Collectibles, Hats - No Tools Required, 10PCS
Feature
Material: nickel-plated copper. Color: Gold.Size: 10mm/0.39inch x 6mm/0.24inch (Diameter * Height).
Spring Loaded fastener for easier on-off action without need a tool.
Great for pins, name tags, display books, lanyards, bags, vests and hats, badge, collectibles, etc.
Easy to use, keep your pins safe. Comes with small clear box packed to avoid locking pin backs losing.
Description
Shapenty pins keeper back is well made, it is small but a great tool to keep your pins safe, no lose any more.6. Mudder 30 Pieces Locking Pin Keepers Backs, No Tool Required (Silver)
Feature
Spring loaded fastener for easier on and offNo tools required; Keep your pins safe
Good for pins, name tags, etc.
Fit for diameter 1.0 mm - 1.1 mm pins
Material: nickel-plated copper
Description
Features:
Apply to display books, lanyards, bags, vests and hats.
Dimension: 1 cm in diameter and 0.6 cm in height
Great for pins, name tags, etc.
Keep your pins safe
Warm note:
These pin backs are not suitable for slightly thick jackets.
Package included:
30 x Pin backs
1 x Metal box
7. Mudder Locking Pin Keepers Backs, No Tool Required (Silver and Gold, 30 Pieces)
Feature
Spring loaded fastener for easier on and offNo tools required; Keep your pins safe
Good for pins, name tags, etc.
Fit for diameter 1.0 mm - 1.1 mm pins
Material: nickel-plated copper
Description
Features:
Apply to display books, lanyards, bags, vests and hats.
Dimension: 1 cm in diameter and 0.6 cm in height.
Great for pins, name tags, etc.
Keep your pins safe
Warm note:
These pin backs are not suitable for slightly thick jackets.
Package included:
30 x Pin backs
1 x Metal box
8. Tie Tacks and Clutch Backs Set, 30 Pieces Metal Pin Backs Locking Pin Keepers with 30 Pieces 10mm Tie Tacks Blank Pins (Gold)- No Tool Required
Feature
PACKAGE INCLUDED -- 30 pieces metal locking pin backs and 30 pieces blank pins both in gold color, enough quantity for your daily use.EASY-TO-USE -- With the spring-loaded fastener design, these pin backings are easy to put on and take off without a tool.
MEASUREMENT -- Each pin sizes is approx. 10 mm/ 0.4 inch in diameter, 9 mm in length, clutch pin back size is approx. 10 mm in diameter, 7 mm in height.
EXCELLENT DESIGN -- Pin backs and pin keepers are made of stainless steel, they are sturdy and colorfast, and the smooth surface prevent the skin from getting stuck injury.
EXTENSIVE USE -- Good replacement for lost backs badges, name tags, pins. Can be applied to tie tacks, lapel pins, badge insignia, citation bars, service bars, jewelry making and so on.
Description
Specification :Material : stainless steel
Color : gold
Pin flat head diameter : approx. 10 mm
Pin Length : approx. 9 mm
Clutch backs size : approx. 10 mm in diameter, 7 mm in height
Features :
DELICATE DESIGN :
The pin backs match for most metal pin; Metal pin backs provides good grip of pin to keep it stay in place.
PERFECT SIZE :
Tie pin and pin backs with reasonable size to match your clothes easily, keep your pins safe.
WIDE RANGE OF USAGE :
Suitable for brooches, name tags, display books, hanging ropes, bags, vests, hats, badges, collections, etc.
Package Includes :
30 x Blank Pins
30 x Pin Backs
9. Kbsing 20 Pcs Locking Pin Keepers Backs (Gold)
Feature
KBSING PIN KEEPERS:Our KBSING pin keepers has 20 pcs in a original box which has "KBSING" logo on it20 pin keepers to a box,fulfilled by Amazon
Easily snaps on and off,keeping your pins safe
No tools required
Great for pins,name tags.etc
10. Onwon 20 Pieces Pin Backs Locking Bulk Metal Pin Keepers Locking Clasp, No Tool Required, Metal Locking Pin Backs, Metal Locking Pin Keepers (20)
Feature
No tool required: easy on-off action, spring loaded fastener simply need you to push to lock them, then push on the base to secure them and pull to loosen the lock and remove.Locking pin backs dimensions: pin backs is 10mm in upper diameter, 5mm in bottom diameter, 5mm in height; Quantities: 20 pieces pins keepers.
Good quality: pin backs locking clasps are made of nickel-plated copper, durable, smooth surface, sturdy and lock your pins firmly to keep them secure.
Safe alternative pins keepers: pin backs provide you replacement to the torn screw or wrench locking mechanism; Keep your objects in place during important moments.
Multifunctional: secure pin backs are suitable for pins, insignia, name tags, display books, lanyards, bags, vests, hats, badge, collectibles, etc.
Description
Onwon 20 pieces locking pin backs made of durable nickel-plated copper, small size use more widely.No tools required, make the pin back more convenient to lock and remove, keep your objects in place during important moment.
Features:
Apply to display books, lanyards, bags, vests and hats.
Dimension: 1 cm in diameter and 0.6 cm in height
Great for pins, name tags, etc.
Keep your pins safe
Warm note:
These pin backs are not suitable for slightly thick jackets.
Package included:
20 x Pin backs