If you looking for renthal parts then you are right place. We are searching for the best renthal parts on the market and analyze these products to provide you the best choice.
If you looking for renthal parts then you are right place. We are searching for the best renthal parts on the market and analyze these products to provide you the best choice.
Best renthal parts
1. Renthal 154U-520-48GRRD Ultralight Red 48 Tooth Rear Sprocket
Feature
Renthal chainwheels are chosen by more factory motocross and supercross teams than any other brand available.Renthal Ultralight rear chainwheels are manufactured to extremely tight tolerances from a special material developed to withstand the rigors of supercross, motocross and enduro racing.
The 7075 T6 aluminum alloy rear chainwheels are 66% lighter than steel, yet incredibly durable.
Their advanced tooth profile, concentricity and accuracy of fit provide maximum power transfer and long-life.
Renthal's combination of a very high strength base material and an exceptionally hardwearing surface result in significantly increased chainwheel life over other brands.
2. Renthal 999-01-BK-07-185 Twinwall Black 1-1/8" Aluminum Handlebar
Feature
Dimensions - overall width: 805mm, total height: 83mm, rise: 40mm, clamp area width: 125mm, sweep: 55mm, control length: 200mmThe revolutionary Twinwall handlebar is an oversized diameter 1-1/8 inch (28.6mm) handlebar which utilizes two tubes, one within the other, borrowing principles from aircraft design to give the best combination of lightness, strength and safety
Outer tube is made from 7010 T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion; inner tube is made from ultra high strength 7010 T6 aluminum and is hard anodized to resist wear from twist grip and controls
Renthal's copyrighted, bonded lightweight single bolt clamping system for the cross-brace, greatly increases strength whilst still allowing flex and comes with a specially developed injection molded crossbar pad
1-1/8 inch (28.6mm) clamping diameter and 7/8 inch (22mm) diameter at the control ends; rubber seals cover the joint to keep out water and cleaning fluids
3. Renthal Final Drive Kit (428 Conversion) K045
Feature
Kit includes front and rear sprocket with same gear ratios as stock and a Gold Renthal R1-428 chainSaves over 2 lbs. over the stock 520 O-ring chain and steel rear sprocket
Improves acceleration and responsiveness with less revolving un-sprung weight
Front sprocket is made from super strong nickel chromoly and is grooved to clear mud and increase chain life
Rear sprocket is made from 7075 T-6 aluminum which is precision machined with self-cleaning mud grooves and lightening holes
4. Renthal C307 R4 ATV Z-Ring 520-Pitch 110-Links Chain
Feature
Patented z-ring seals dramatically increase the life spanLarger diameter pins manufactured from specially enhanced steel improve the resistance to shock loads
A quad riveting process on each pin increases the tensile strength of the chain
Thicker inner and outer plates increase the fatigue life of the chain
5. Renthal 672-01-BU Fatbar Blue 1-1/8" Aluminum Handlebar
Feature
Dimensions - overall width: 796mm, total height: 80mm, rise: 55mm, clamp area width: 125mm, sweep: 57mm, control length: 190mmThe Renthal Fatbar features a tapered outer wall resulting in a 1-1/8 inch (28.6mm) clamping diameter and 7/8 inch (22mm) diameter at the control ends
This profiled wall and braceless design combines excellent strength with good flexibility
7010 T6 aluminum, which Renthal has exclusive rights to this specially developed alloy, gives high impact strength, lightweight and excellent vibration dampening
A 15 step anodizing process forms an integral coating giving protection against corrosion and a laser etched positioning grid helps with precise adjustments
6. Renthal 121U-428-49GPBU Ultralight Blue 49 Tooth Rear Sprocket
Feature
Renthal chainwheels are chosen by more factory motocross and supercross teams than any other brand available.Renthal Ultralight rear chainwheels are manufactured to extremely tight tolerances from a special material developed to withstand the rigors of supercross, motocross and enduro racing.
The 7075 T6 aluminum alloy rear chainwheels are 66% lighter than steel, yet incredibly durable.
Their advanced tooth profile, concentricity and accuracy of fit provide maximum power transfer and long-life.
Renthal's combination of a very high strength base material and an exceptionally hardwearing surface result in significantly increased chainwheel life over other brands.
7. Renthal Rear Sprocket (428 / 48T) (Blue) for 02-19 Yamaha YZ85
Feature
Renthal chainwheels are chosen by more factory motocross and supercross teams than any other brand available.Renthal Ultralight rear chainwheels are manufactured to extremely tight tolerances from a special material developed to withstand the rigors of supercross, motocross and enduro racing.
The 7075 T6 aluminum alloy rear chainwheels are 66% lighter than steel, yet incredibly durable.
Their advanced tooth profile, concentricity and accuracy of fit provide maximum power transfer and long-life.
Renthal's combination of a very high strength base material and an exceptionally hardwearing surface result in significantly increased chainwheel life over other brands.
8. Renthal Rear Sprocket (520 / 36T) (Silver) for 08-14 Kawasaki KFX450R
Feature
Renthal chainwheels are chosen by more factory motocross and supercross teams than any other brand available.Renthal Ultralight rear chainwheels are manufactured to extremely tight tolerances from a special material developed to withstand the rigors of supercross, motocross and enduro racing.
The 7075 T6 aluminum alloy rear chainwheels are 66% lighter than steel, yet incredibly durable.
Their advanced tooth profile, concentricity and accuracy of fit provide maximum power transfer and long-life.
Renthal's combination of a very high strength base material and an exceptionally hardwearing surface result in significantly increased chainwheel life over other brands.
9. Renthal 784-03-BK-03-219 Black 7/8" Aluminum Handlebar
Feature
Dimensions - overall width: 740mm, total height: 118mm, rise: 83mm, clamp area width: 95mm, sweep: 42mm, control length: 175mm7/8 inch (22mm) external diameter to fit most standard sized clamps and controls with knurling on the grip end only increases bonding between bar and grip
7010 T6 aluminum, which Renthal has exclusive rights to this specially developed alloy, gives high impact strength, lightweight and excellent vibration dampening
A 15 step anodizing process forms an integral coating giving protection against corrosion and a laser etched positioning grid helps with precise adjustments
Renthal's copyrighted, bonded lightweight single bolt clamping system for the cross-brace, greatly increases strength whilst still allowing flex and comes with a specially developed injection molded crossbar pad
10. Too Much Money: A Novel
11. RENTHAL 7/8 HANDLEBAR WITH PAD BLACK YAMAHA BANSHEE
Feature
World famous Renthal handlebars hane claimed more World Championships and US MX titles than all other handlebars combinedExclusive aerospace aluminum alloy is preciously engineered for the best combination of strength and fatigue reduction
Oversize tube is machined down to 7/8in. to ensure a perfect diameter and prevent the handlebar from slipping in the clamps
Shot peened surface finish to help prevent fatigue failure
Laser etched positioning grid
12. Renthal Road Bars - Standard 7/8 (754 - Low) (Black)
Feature
Renthal Road handlebars are a 7/8" (22.2 mm) diameter handlebar that utilizes the same materials and manufacturing process as their championship winning motocross handlebars.For Road Use Only, these bars come without a cross brace (except the Street-This is a standard fitment found on most bikes.
All controls are designed to meet this specific diameter.Shot peened: Millions of tiny steel shots are blasted at high velocity at the bar, breaking the surface tension of the material and leaving a textured surface finish.
The process increases the fatigue life and durability of the bar.Anodized finish: The anodized surface finish provides an integral coating preventing corrosion.
The 15 step process is carefully carried out on each bar individually.Positioning grid: Laser marked onto the center of the handlebar, a detailed setup grip ensures you can centralize the bar in the mounts and accurately set the angle in the mounts.7010 T
13. RENTHAL 7/8 HANDLEBAR WITH PAD RC HIGH BLACK UNIVERSAL
Feature
World famous Renthal handlebars hane claimed more World Championships and US MX titles than all other handlebars combinedExclusive aerospace aluminum alloy is preciously engineered for the best combination of strength and fatigue reduction
Oversize tube is machined down to 7/8in. to ensure a perfect diameter and prevent the handlebar from slipping in the clamps
Shot peened surface finish to help prevent fatigue failure
Laser etched positioning grid
14. Renthal P286 Black Team Issue SX Handlebar Pad Orange Cycle Parts
Feature
The new Team Issue SX bar pads are the same exact pads used by our factory race teamsThe Team Issue bar pads feature the same injection molded construction as the standard pads, just in team specific color combinations for a more personalized look
The SX pad features an injection molded foam which offers better impact protection and significantly increases the life span
Also improved is the is the fit on the cross brace which helps decrease movement during use
Durable PVC cover with High-density, injection molded foam to reduce rider injury, Extremely lightweight, Velcro fastening, Power-wash proof permanent graphics
15. Renthal 999-01-BK-07-185 Twin Wall 999 Mcgrath/Short Black
Feature
Renthal TwinWall is designed for the toughest conditions.The board has a larger diameter, 1 1/8" (28, 6 mm)
Twinwall is a patented design that offers the driver a combination of strength, light weight and safety.
16. Renthal 603-01-BK Fatbar Black 1-1/8" Aluminum Handlebar
Feature
Dimensions - overall width: 803mm, total height: 92mm, rise: 56mm, clamp area width: 100mm, sweep: 57mm, control length: 187mmThe Renthal Fatbar features a tapered outer wall resulting in a 1-1/8 inch (28.6mm) clamping diameter and 7/8 inch (22mm) diameter at the control ends
This profiled wall and braceless design combines excellent strength with good flexibility
7010 T6 aluminum, which Renthal has exclusive rights to this specially developed alloy, gives high impact strength, lightweight and excellent vibration dampening
A 15 step anodizing process forms an integral coating giving protection against corrosion and a laser etched positioning grid helps with precise adjustments
17. Renthal Grooved Front & Ultralight Rear Sprockets Kit - 14/51 GREEN - compatible with Kawasaki KX80, KX85, KX100
Feature
Renthal Sprockets Kit - Grooved Countershaft Sprocket & Ultralight Rear Sprocket -FITS:
Kawasaki KX80 / KX80 Big Wheel ( 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 )
Kawasaki KX85 / KX85 Big Wheel ( 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 )
Kawasaki KX100 ( 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2018, 2017, 2018 ) + + + + + + + + + + Suzuki RM100 ( 2003 )
18. Renthal Front Sprocket 14 Tooth for Yamaha YFZ 450 2004-2009
Feature
Front sprockets are made from case hardened nickel chromoly steelFront and rear sprockets feature self-cleaning grooves to clear mud and increase sprocket life
Ultra light sprockets are 10-15% lighter than standard sprockets, drilled design saves weight and doesn't sacrifice strength
19. Renthal FATBAR PAD LE ORG/ORG FOAM P328
Feature
Get even more co-ordinated with new colormatched foams from Renthal.Carefully matched to pad covers for the closest match to O.E. colors, the pads feature an injectionmoulded foam and durable TPU cover which offers better impact protection and significantly increases the life span.
Durable cover
High-density, injection-moulded foam to reduce rider injury
Extremely lightweight
20. Texas Chainsaw 3D