Finding your suitable rocket launcher rod holders for boat is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best rocket launcher rod holders for boat including detail information and customer reviews. Let's find out which is your favorite one.
Finding your suitable rocket launcher rod holders for boat is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best rocket launcher rod holders for boat including detail information and customer reviews. Let’s find out which is your favorite one.
Best rocket launcher rod holders for boat
1. Oceansouth 'Clamp-on' Fishing Rack, Boat Rod Rack, Rocket Launcher
Feature
Designed to team with just about any bimini or canopy with 1" framework.1 Bright Dipped Aluminum tube, cross bars and uprights. 6 Rod Holders constructed from High Performance PPO.
Connectors and mounts constructed from Marine Grade Polymers.
Alloy double knuckle clamp secures Rocket Launcher firmly to bimini.
Fits biminis up to 75" canopy width. can be trimmed down to desired width.
Description
The 'Clamp-on' Rocket Launcher has been designed to team with just about any bimini or canopy with 1" framework. The sleek and robust design will compliment any boat top.2. Scotty #479 Rocket Launcher Bottom Pivot Rod Holder
Feature
Over 9" of reinforced nylon composite constructionFully adjustable, swivels 360 degrees
No mount included, enabling you to choose whichever mount suits your needs
Less missed strike opportunities
Accomodates all rods
Description
Scotty #479 Rocket Launcher Bottom Pivot Rod Holder is a tube style rod holder that is simple but gets the job done. The Scotty Rocket Launcher Rod Holders come in a variety of options, including the choice of a 9 stainless steel jacketed composite construction. All Rocket Launchers tilt up and down, including upright for rod storage while traveling. This Rod Holder supports a wide range of rod and reel setups with an inside diameter of 1.70. The Scotty Rocket Launcher is designed for salmon and other medium to small fish species. This item does not come with a mount, enabling you to choose which mount suits your needs seperately.
Scotty manufactures products that are sold into the fishing, marine, and outdoor industries worldwide. We have all the gear from Pot Pullers, manual and electric Downriggers, Rod Holders, Oar Locks, Fishfinder, Rod, and Float Tube Mounts, to Safety Equipment for your boat, kayak, and stand up paddle board. When it comes to on the water safety, Scotty has got you covered! Scotty safety equipment ranges from rescue throw bags, whistles, flashlights, and sea-lights.
We have total commitment to quality, and unmatched service. That means our customers everywhere can expect reliability and satisfaction from every product that carries the Scotty name. With Scotty you will find the right Downrigger, Mounting System and Accessories to suit your fishing, boating, kayaking and stand up paddle board needs.
3. SeaLux Marine Boat Rail Mount Clamp-On Fishing Rocket Launcher Rod Holder 7/8" to 1" Horizontal Mount
Feature
SeaLux Marine Boat Rail Mount Clamp-On Fishing Rod Holder Horizontal for7/8" - 1" tubing railMirror finished stainless steel construction, for sleek appearance. 316 SS Clamp, 304 SS tube
Suit for modern watercraft. Ideal for fishing boats with rails, where gunwale space may be limited
Rubber insert to protect your fishing rod from any wear against the stainless surface
4 screw clamping design is stronger and tighter than other clamp on rod holders for a more secure slip resistant rod holder to keep your rods safe. Integrally cast gimbal bar is indestructible. Includes UV resistant white vinyl liner to protect rods.
Description
Rod Holder Slot 10" in length.4. Amarine-made 4 Tube Adjustable Stainless Rocket Launcher Rod Holders, Can Be Rotated 360 Deg
Feature
4 TUBE 2 Leg , Adjustable ,304 Stainless Steel .This rack may be adjusted "as one " to the angle you need ,
ishing rod holders 23" 1/2 overall length over height 13 inches ..
4 Rod holder tubes are on 7" centers. 2" diameter and 10.25" in length with welded base pins.
All 304 Stainless Steel with # 7 polish .#10 being flawless and #8 being a mirror , silver in color.
Description
Rod Tubes are 10 inches long 2" inch diameter on 7 inch centers leaving a 5 inch space between tubes. .065 or 1/16th inch wall thickness and have a full length PVC liner.Cross tubes are 5 inches in length 1 inch diameter with a wall thickness of .065 or 1/16th of an inch.
2 Stand/off's or legs are 5 and 1/2 long 1 inch diameter with a wall thickness of .065 or 1/16th of an inch. Collar Stand/off and base plate and base tube are .120 or 1/8th thickness, base plats are cast forged.
base plate tube have two 1/4 inch by 20 allen type set screws.
Locking bolts are 3/8th Die. by 3/4 Length #16 that requires a 9/16th socket on a short extension to tighten, it is concealed inside the stand/off leg.
5. Oceansouth Fishing Rack, Boat Rod Rack, Rocket Launcher
Feature
Free standing, able to be mounted on deck or gunwale.1 Bright Dipped Aluminum tube, cross bars and uprights. 6 Rod Holders constructed from High Performance PPO.
Connectors and mounts constructed from Marine Grade Polymers.
Universal mounts with Thumb Screw release allows Rocket Launcher to be folded down.
MAX MOUNTING WIDTH 96" , MAX. ARCH HEIGHT 65" can be trimmed down to desired width and hight.
Description
Free standing Oceansouth Rocket launcher is the best way to store your rods above deck space. Easily installed and versatile construction allows you to adjust size and mount options to suit your boat.6. Amarine-made 5 Rod Holders Angle Adjustable Rod Holders Fishing Console Boat T Top Rod Holder Rocket Launcher for Rail 1-1/2" to 1-3/4" - SH9668S5
Feature
The clamp size is 2 inch, we supply 2 rubber inserts for 1-1/2 inch to 1-3/4 inch size tubing.5 rod holders. Stainless Steel
The 5 rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch tube pipe (without insert), 1.5inch-1.75inch pipe (with insert).
You will have a place for you fishing rods in a safe place off your floor
Description
5 rod holders. Stainless SteelThe Amarine-made 5 rod holders were created to hold 5 rods.
Length of All :32-1/4"
The 5 rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch tube pipe (without insert), 1.5inch-1.75inch pipe (with insert).
You will have a place for you fishing rods in a safe place off your floor.
The smooth clear finish to the 5 tubes and clamps makes these rod holders so easy to keep clean.
A quick wash, rinse and wipe down after a great days fishing is all it needs.
No hard polishing to get these puppies looking great all the time. Materials. The clamp fitting is cnc machined from Stainless 316.
All our hardware is 316 stainless steel bolts for secure holds, strength and durability in the harsh marine environment.
We source and only use high Quality raw materials for pure performance to look after your gear. Size.
The clamp size is 2 inch, we supply 2 rubber inserts for 1-1/2 inch to 1-3/4 inch size tubing.
The rubber insert will protect your Dolphin t top frame.
The clamp will allow the rod holders to be adjusted at 18 degree intervals. Now you can angle any of the 5 rods sideways to an angle that suits your needs.
7. Amarine-made 5 Rod Holders Angle Adjustable Rod Holders Fishing Console Boat T Top Rod Holder Rocket Launcher Adjustable Fishing Rod Holder for Rails 1" to 1-1/4"
Feature
The clamp size is 2 inch, we supply 2 rubber inserts for 1" to 1-1/4" inch size tubing.5 rod holders. Stainless Steel;Adjustable Fishing Rod Holder for Rails 1" to 1-1/4"
The 5 rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch tube pipe (without insert), 1.5inch-1.75inch pipe (with insert). <
You will have a place for you fishing rods in a safe place off your floor;Stainless Steel Clamp On Adjustable Fishing Rod Holder for Rails 1" to 1 1/4". It Can Adjust to Any Angle.
Description
5 rod holders. Stainless SteelThe Amarine-made 5 rod holders were created to hold 5 rods.
Length of All :32-1/4"
The 5 rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch tube pipe (without insert), 1.5inch-1.75inch pipe (with insert).
You will have a place for you fishing rods in a safe place off your floor.
The smooth clear finish to the 5 tubes and clamps makes these rod holders so easy to keep clean.
A quick wash, rinse and wipe down after a great days fishing is all it needs.
No hard polishing to get these puppies looking great all the time. Materials. The clamp fitting is cnc machined from Stainless 316.
All our hardware is 316 stainless steel bolts for secure holds, strength and durability in the harsh marine environment.
We source and only use high Quality raw materials for pure performance to look after your gear. Size.
The clamp size is 2 inch, we supply 2 rubber inserts for 1" to 1-1/4"inch size tubing.
The rubber insert will protect your Dolphin t top frame.
The clamp will allow the rod holders to be adjusted at 18 degree intervals. Now you can angle any of the 5 rods sideways to an angle that suits your needs.
8. Dolphin Rocket Launcher Rod Holder for Boat T Tops, Holds 9 Fishing Poles, Rods Up to 1.7 inch Diameter, CNC Machined 6061 Anodized Aluminum, Fits Fishing Boat Towers with Round Tubing
Feature
Rocket Launcher Rod Holder holds 9 fishing poles and clamps on to T Tops and Fishing Boat Towers with 2 x Clamps 12.25 inch apart.Fishing Rod Rocket Launchers are made with 6061 Aircraft Grade Aluminum and then dipped in a Anodized bath for Heavy Duty salt water protection.
Rocket Launcher Fishing Rod Holder is heavy duty quality construction, and uses rubber clamp inserts for protection. The clear anodized finish is easy to keep clean, NO polishing.
Fishing Rod Holder Construction - CNC machined from solid 6061 aircraft grade aluminium. Cold-Drawn tubing anodized for superior protection. 316 stainless hardware. Only high grade raw materials used for pure performance.
Fishing Pole Boat Holder Dimensions - Clamp Sizes 2", 1 7/8", 1 3/4", 1 5/8", 1 1/2", 1 3/8", 1 1/4", Clamps are spaced 12.25 inch center to center
Description
Dolphin 9 Rod Rocket Launcher Fishing Pole Holder for T Tops. Clamps to your T Top or Fishing Tower with 2 x Clamps that are positioned 12.25 inch apart center to center. Our rocket launcher will hold poles up to 1.75 inch in diameter. This item is made with CNC Machined 6061 Aircraft Grade aluminum and then dipped in an Anodized bath for extreme salt water protection. Heavy duty quality construction, and rubber clamp inserts to protection. The clear anodized finish is easy to keep clean, NO polishing.Features:
9. Amarine-made 8 Tube Adjustable Stainless Rocket Launcher Rod Holders, Can Be Rotated 360 Deg
Feature
8 TUBE 4 Leg , Adjustable ,304 Stainless SteelThis rack may be adjusted "as one " to the angle you need ,
Fishing rod holders 51" overall length over height 13 inches .. 8 Rod holder tubes are on 7" centers. 2" diameter and 10.25" in length with welded base pins.
All 304 Stainless Steel with # 7 polish .#10 being flawless and #8 being a mirror , silver in color.
4 Stand/off's or legs are 5 and 1/2 long 1 inch diameter with a wall thickness of .065 or 1/16th of an inch.
Description
8 Tube Adjustable Stainless Rocket Launcher Rod Holders , 4 Legs , Can be Rotated 360 DegFishing rod holders 51" overall length
All 8 Rod tubes adjust as one to a angle of choice , rod tubes do not adjust independently .
All 304 Stainless Steel with # 7 polish .#10 being flawless and #8 being a mirror , silver in color. All TIG welded
Rod Tubes are 10 inches long 2" inch diameter on 7 inch centers leaving a 5 inch space between tubes. .065 or 1/16th inch wall thickness and have a full length PVC liner. Cross tubes are 5 inches in length 1 inch diameter with a wall thickness of .065 or 1/16th of an inch.
10. Amarine-made 5 Tube Adjustable Stainless Rocket Launcher Rod Holders, Can Be Rotated 360 Deg
Feature
5 TUBE 2 Leg , Adjustable ,304 Stainless Steel .This rack may be adjusted "as one " to the angle you need , All 304 Stainless Steel with # 7 polish .#10 being flawless and #8 being a mirror , silver in color.
Rod Tubes are 10 inches long 2" inch diameter on 7 inch centers leaving a 5 inch space between tubes. .065 or 1/16th inch wall thickness and have a full length PVC liner.
2 Stand/off's or legs are 5 and 1/2 long 1 inch diameter with a wall thickness of .065 or 1/16th of an inch.
5 Rod holder tubes are on 7" centers. 2" diameter and 10.25" in length with welded base pins.
Description
5 TUBE 2 Leg , Adjustable ,304 Stainless Steel .This rack may be adjusted "as one " to the angle you need ,
Fishing rod holders 30" overall length over height 13 inches ..
5 Rod holder tubes are on 7" centers. 2" diameter and 10.25" in length with welded base pins.
All 304 Stainless Steel with # 7 polish .#10 being flawless and #8 being a mirror , silver in color.
Rod Tubes are 10 inches long 2" inch diameter on 7 inch centers leaving a 5 inch space between tubes. .065 or 1/16th inch wall thickness and have a full length PVC liner. Cross tubes are 5 inches in length 1 inch diameter with a wall thickness of .065 or 1/16th of an inch.
2 Stand/off's or legs are 5 and 1/2 long 1 inch diameter with a wall thickness of .065 or 1/16th of an inch. Collar Stand/off and base plate and base tube are .120 or 1/8th thickness, base plats are cast forged.
base plate tube have two 1/4 inch by 20 allen type set screws.
Locking bolts are 3/8th Die. by 3/4 Length #16 that requires a 9/16th socket on a short extension to tighten, it is concealed inside the stand/off leg.