There are many reasons you might choose to buy fluke otdr but it is not easy to find the best suitable fluke otdr for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best fluke otdr.
Best fluke otdr
1. Fluke Networks FOS-100-S Fiber One-Shot Pro Kit, Single Mode Fault Finder
Feature
Measure 23,000 meters / 15 miles feet of fiber optic cable, 9/125m at 1550Nm output wavelength. Compatible with standard pon wavelengths: 1310, 1490, 1550 and 1625 nmQuick set-up. Connect your fiber and press the test button. No lengthy set-up necessary
Find problems quickly. Six-second test time-no more blind troubleshooting that can waste hours
Key information visible on a large display; power loss in db and distance in meters or feet
Removable sc adapter is easily cleaned. Optional lc, st and ft interchangeable adapters are available
Description
Fiber one-shot Pro works on single mode optical fiber to find high loss connections and the end of the fiber. It provides more information than a simple visual fault locator (vfl), but is typically faster and easier to use than a optical time domain reflectometer (otdr). this FOS-100-S includes; single mode fiber fault locator unit, screw on interchangeable SC adapter, upc-upc 2-meter patch cord, carrying case, 4-language quick reference guide (manuals in 9 languages available on-line), Safety instruction manual, and batteries.2. Fluke Networks OFP-100-QI OptiFiber Pro Quad OTDR Fiber Optic Cable Tester with Built-In VFL and Inspection Kit
Feature
OptiFiber Pro OTDR with quad module, launch cables, and accessories for verification, troubleshooting, certification, and inspection of multimode and single-mode fiber in enterprise networksQuad module detects 850nm and 1,300nm multimode wavelengths in up to 40km of cabling and 1,310nm and 1,550nm single-mode wavelengths in up to 130km of cabling to check connectivity, locate connections and faults, measure loss and reflectance, and allow Tier 2 certification
ProjX management system allows the user to define project settings and tasks, and can be accessed via LinkWare software for analysis of test results and to generate reports
Built-in VFL traces fibers and verifies continuity, and the FiberInspector video probe with four interchangeable tips enables examination of patch cords and patch panel bulkheads
Smart phone interface with capacitive touch-screen for navigating menus, zooming in on test results, and accessing help to resolve problems
Description
The Fluke Networks OFP-100-QI OptiFiber Pro OTDR with quad module is a fiber optic cable tester with multimode and single-mode launch cables, ProjX management system, built-in VFL, a FiberInspector video probe, and accessories for verification, troubleshooting, certification, and inspection of multimode and single-mode fiber in enterprise networks. The OTDR (optical time-domain reflectometer) consists of a Versiv main unit and a quad (multimode and single-mode) OTDR module for checking connectivity, locating connections and faults, measuring loss and reflectance, providing pass/fail test results, and allowing Tier 2 certification. The quad module transmits multimode wavelengths of 850nm and 1,300nm for testing up to 40km of cabling and single-mode wavelengths of 1,310nm and 1,550nm for testing up to 130km of cabling. The ProjX management system allows the user to define project settings and tasks, and can be accessed from a computer via the meter's USB interface using the included LinkWare software to generate certification reports, analyze test results, and create charts and graphs detailing the performance of cabling infrastructure. The software is compatible with Microsoft Windows XP,Vista, and 7 operating systems. The built-in VFL (visual fault locator) verifies continuity and helps find breaks, connectors, and splices, emitting a laser that can be set for continuous or flashing output to trace and identify fibers. The main unit features a 5.7" LCD smart phone interface with capacitive touch-screen for navigating menus, zooming in on test results, and accessing help to resolve problems. Optimized for the datacenter, the OTDR has short event and attenuation dead zones to locate events and faults precisely, and its datacenter OTDR mode automatically selects the optimal configuration for testing datacenter fiber. Test speed and pulse width vary according to the meter setting. Compliant with International Organization for Standardization (ISO) and Telecommunications Industry Association (TIA) standards, the OTDR certifies fiber performance based on industry standards as well as customized specifications. This OTDR is a troubleshooting and Tier 2 certification tool used by network technicians, designers, and contractors to install, maintain, and optimize performance of standard and high-bandwidth fiber optic cable in enterprise networks and data centers.
The launch cablestwo 50m SC/LC and one 50m SC/SC multimode; two 9m SC/LC and one 9m SC/SC single-modeminimize the dead zone to find faults close to the end of the cable being measured. The FiberInspector video probe magnifies to 200X for examining patch cords and patch panel bulkheads for contamination without disassembling the panel. It has a USB connector for attaching to the OTDR and comes with four interchangeable tips (SC, LC, 2.5mm universal, 1.25mm universal) for accommodating different connector ports. In addition to the OTDR with quad module, launch cables, and FiberInspector Probe with tips, the kit includes two SC adapters for the module, an SC/SC adapter, an LC/LC adapter, two launch cable tool packs, IBC OneClick cleaners (1.25mm and 2.5mm), a USB interface cable, a LinkWare PC software CD, a user guide CD, an AC adapter/charger, a carrying strap, a carrying case, a statement of calibration, and instructions.
OptiFiber Pro OTDR with Quad Module Specifications
| Cable compatibility | 50/125m, 62.5/125m multimode fiber; single-mode fiber |
| Maximum test distance | 40km for multimode fiber, 130km for single-mode fiber |
| Wavelengths | 850nm + or - 10nm; 1,300nm +35nm or -15nm; 1,310nm + or - 25nm; 1,550nm + or - 30nm |
| Event dead zone (typical) | 850nm: 0.5m; 1,300nm: 0.7m; 1,310nm: 0.6m; 1,550nm: 0.6m |
| Attenuation dead zone (typical) | 850nm: 2.5m; 1,300nm: 4.5m; 1,310nm: 3.6m; 1,550nm: 3.7m |
| Dynamic range (typical) | 850nm: 28dB; 1,300nm: 30dB; 1,310nm: 32dB; 1,550nm: 30dB |
| Reflectance range (typical) | 850nm: -14 to -57dB; 1,300nm: -14 to -62dB; 1,310nm: -14 to -65dB; 1,550nm: -14 to -65dB |
| Agency certifications and standards met | ISO and TIA compliant |
| Power source | 7.2V lithium ion battery pack (installed) |
| Dimensions (with module and battery) | 27.94 x 13.33 x 6.67cm/11.0 x 5.25 x 2.625 inches (H x W x D) |
| Weight (with module and battery) | 1.28kg/3lb. 5oz. |
Built-in VFL Specifications
| Emitter type | Class II laser |
| Operating wavelength (nominal) | 650nm |
| Spectral width (RMS) | + or 3nm |
| Maximum output power | 1.0mW |
| Output modes | Continuous wave, 2 to 3Hz pulse |
| Connector type | Universal 2.5mm adapter |
FiberInspector Video Probe Specifications
| Magnification | 200X |
| Light source | LED |
| Field of view | Horizontal: 425m; vertical 320m |
| Detection capability | 0.5m |
| Dimensions (without tip) | 175 x 35mm/ 6.75 x 1.5 inches (H x W) |
| Weight | 200g |
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
A fiber optic cable tester is a device for troubleshooting, inspecting, and certifying fiber network cabling. Devices range from one-button tools for checking connectivity to complex tools for certifying proper installation of fiber networks. A device that performs fiber certification is designated as either loss-length (Tier 1) or fiber plant characterization and troubleshooting (Tier 2). Some of the devices test either single-mode or multimode fiber, while others can test both single-mode and multimode fiber. Cabling contractors, installers, and network technicians use fiber optic cable testers to set up and maintain networks within a building or on a campus in corporate, academic, manufacturing, and other enterprise network environments.
Fluke Networks manufactures tools for network infrastructure installation, testing, certification, and troubleshooting, in copper, fiber, and wireless networks, with its tools widely used by contractors, enterprises, and communication service providers. The company, which operates globally, is based in Everett, WA.
What's in the Box?
- Versiv main unit with battery pack
- OptiFiber Pro quad OTDR module
- (2) SC adapters for the module
- SC/SC adapter
- LC/LC adapter
- (2) 50m SC/LC multimode launch cables
- 50m SC/SC multimode launch cable
- (2) 9m SC/LC single-mode launch cables
- 9m SC/SC single-mode launch cable
- (2) launch cable tool packs
- FiberInspector video probe
- Interchangeable video probe tips (SC, LC, 2.5mm universal, 1.25mm universal)
- 1.25mm IBC OneClick cleaner for LC and MC connectors
- 2.5mm IBC OneClick cleaner for SC, ST, and FC connectors
- USB interface cable
- LinkWare PC software CD
- User guide CD
- AC adapter/charger
- Carrying strap
- Carrying case
- Statement of calibration
- Instructions
3. Fluke Networks DTX-1800-MSO 120-GLD DTX-1800 Kit with DTX-MFM2 Multimode & DTX-SFM2 Single-mode Fiber Modules, & DTX-OTDR-QMOD Compact OTDR Module and 1 Yr. of Gold Support
Feature
Copper and fiber optic cable certification test set with DTX-1800 cable analyzer, DTX-MFM2 multimode and DTX-SFM2 single-mode fiber modules, and DTX-OTDR-QMOD compact ODTR modules performs extended certification of high-speed networks to ISO Level IV and TIA Level IIIe accuracyPerforms Category 6 autotest in 9 seconds and tests shielded and unshielded twisted pair LAN cabling (STP, FTP, SSTP, and UTP), Category 6A/Class EA permanent link adapters, and Category 6/Class E channel adapters
Stores up to 250 qualification test results and downloads results to a computer for analysis and generation of network certification reports
Performs Level IV accuracy tests at bandwidths up to 900MHz that comply with industry standards including TIA, ISO/IEC, EN, ANSI, and IEEE
Includes DTX-1800 cable analyzer, smart remote, one set each of DTX Series 2 Multimode Fiber Module (DTX-MFM2), Single-mode Fiber Module (DTX-SFM2), and DTX Compact OTDR Module (DTX-OTDR-QMOD), and instructions for activating one year of Fluke Networks' Gold Support, which covers repairs, calibration, and technical support
Description
The Fluke Networks DTX-1800-MSO120/GLD DTX 1800 Copper/Fiber/OTDR kit with DTX-MFM2 multimode fiber and DTX-SFM2 single-mode fiber modules, DTX-OTDR-QMOD compact modules, and DTX-1800 cable analyzer performs Level IV accuracy tests of copper and fiber optic networks at speeds up to 10 gigabits and bandwidths up to 900MHz that comply with industry standards including TIA, ISO/IEC, EN, ANSI, and IEEE. The meter performs a Class F autotest in less than 25 seconds and a Category 6 autotest in less than 10 seconds. Testing includes shielded and unshielded twisted pair LAN cabling (STP, FTP, SSTP, and UTP), Category 6A/Class EA permanent link adapters, and Category 6/Class E channel adapters. The meter includes one main unit, one smart remote, one set of DTX-MFM2 multimode fiber modules, one set of DTX-SFM2 single-mode fiber modules, one set of DTX-OTDR-QMOD compact OTDR modules, and instructions for activating one year of Fluke Networks' Gold Support, which covers repairs, calibration, and technical support. The DTX module cavity accepts additional test modules as network testing needs and requirements change, including fiber, OTDR (optical time-domain reflectometer), network service, and alien crosstalk modules. The units support coaxial adapters, custom limits, and talk between operators at the main and remote units (headphones included). A wiremap test can be performed to verify that cables are installed correctly. The permanent link adapter provides repeatable accuracy and Category 5e, Category 6, and Category 6A interoperability. Certification tests are performed to TIA, ISO/IEC, EN, ANSI, and IEEE standards. The user-selected test standard automatically determines the test parameters and frequency range for the performed tests. Autotests can be started from the main or remote unit. The fiber autotest performs a dual-fiber, dual-wavelength certification test. The backlit, passive color, LCD display has a diagonal measurement of 3.7"/9.4cm and a resolution of 240 x 320 pixels (W x H). Copper and fiber testers are used by network technicians to troubleshoot, maintain, and optimize performance of copper and fiber optic cabling, hardware connections, and network settings in enterprise networks.
The meter include one set of each of the following modules: DTX Series 2 Multimode Fiber Module (DTX-MFM2), Single-mode Fiber Module (DTX-SFM2), and DTX Compact OTDR Module (DTX-OTDR-QMOD). Modules plug into the back of the main meter and remote sensor to provide testing and documentation for network connectivity and cable certification. The DTX-MFM2 Multimode Module provides certification of multimode fiber network installations and is equipped with 850nm and 1,300nm LED light sources combined into a single output port and an 850/1,300/1,310/1,550nm optical power meter. The DTX-SFM2 Single-mode Module provides certification of single-mode fiber network installations and is equipped with 1,310nm and 1,550nm FP laser sources combined into a single output port and an 850/1,300/1,310/1,550nm optical power meter. The DTX-OTDR-QMOD Fiber Module provides Basic (Tier 1) and Extended (Tier 2) fiber certification. The module provides OTDR trace and event analysis to locate and evaluate reflective and loss events on multimode (850nm and 1,300nm; 50 micrometer, and 62.5 micrometer) and single-mode (1,310nm and 1,550nm; 9 micrometer) fiber. Pass/fail results are based on factory-installed or user-defined limits. Each module set has a built-in visual fault locator (VFL) that locates breaks, bad splices, and bends, and checks fiber continuity and polarity. The meter stores up to 250 sets of test results (graphical Category 6). The included removable 128MB multimedia card (MMC) stores up to 2,000 Category 6 graphical link test results. An autosave function ensures that test results are captured and saved. Results can be downloaded to a computer for long-term records retention, or imported to the LinkWare software for analysis and generation of certification reports to provide evidence that the installation has been completed according to standards and best practices (software and USB cable included).
Specifications
| Standard link interface adapters (shielded and unshielded twisted-pair LAN cabling) | TIA Category 4, 5, 5E, 6 and 6A: 100 ISO/IEC Class C and D: 100 and 120 ISO/ IEC Class E, F and FA: 100 Category 6A/Class EA permanent link adapters TIA Category 3, 4, 5, 5e, 6, 6A and ISO/IEC Class C, D, E and EA permanent link Category 6A/Class EA channel adapters TIA Category 3, 4, 5, 5e, 6, 6A and ISO/IEC Class C, D, E and EA channels |
| Supported test parameters (selected standard automatically determines the test parameters and frequency range) | Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (attenuation), Return Loss (RL), RL @ Remote, NEXT, NEXT @ Remote, Attenuation-to-crosstalk Ratio (ACR-N), ACR-N @ Remote, ACR-F (ELFEXT), ACR-F @ Remote, Power Sum ACR-F (ELFEXT), PS ACR-F @ Remote, Power Sum NEXT, PS NEXT @ Remote, Power Sum ACR-N, PS ACR-N @ Remote, Power Sum Alien Near End Xtalk (PS ANEXT), and Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F) |
| Autotest speed | Full two-way autotest of Category 6 Twisted-Pair links in 9 seconds, full two-way autotest of Category 6A and ISO/IEC Class F links in 22 seconds |
| TIA test standards | TIA Category 3, 5e, 6 & 6A per ANSI/TIA-568-C.2 TIA Category 5 (1000BASE-T) per TIA TSB-95 TIA Category 6 per TIA/EIA-568B.2-1 TIA TSB-155 (DTX-1800 only) |
| ISO/IEC test standards | ISO TR 24750 ISO/IEC 11801 Class C, D, and E, Ea & F |
| EN, ANSI, and IEEE standards | EN 50173 Class C, D, E, EA & F ANSI TP-PMD IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T IEEE 802.3an 10GBASE-T |
| Results storage | 250 qualification test results (graphical Category 6) |
| Data output | Removable memory card and serial and USB interface |
| Agency safety certifications and approvals | CSA C22.2 No. 1010.1: 1992 EN 61010-1 1st Edition Amendments 1, 2; EN 61326-1; Pollution Degree 2 |
| Power source (main and remote units) | 7.4V lithium-ion battery pack with 108VAC to 132VAC adapter/charger |
| Weight | 2.4lb./1.1kg, nominal (without adapter or module) |
| Dimensions (main unit and remote) | 8.5 x 4.4 x 2.4 inches/21.6 x 11.2 x 6 cm (H x W x D) |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
A copper cable tester is a device for troubleshooting, inspecting, and certifying copper network cabling. Devices range from one-button tools for checking connectivity to complex tools for certifying network installations. Three types of testing include verification, to test whether a connection or cable is functioning correctly; qualification, to test a network's ability to support specific speeds and functionality; and certification, to verify whether a network installation meets industry standards. Cabling contractors, installers, and network technicians use copper cable testers to set up and maintain networks within a building or on a campus in corporate, academic, manufacturing, and other enterprise network environments.
Fluke Networks manufactures tools for network infrastructure installation, testing, certification, and troubleshooting, in copper, fiber, and wireless networks, with its tools widely used by contractors, enterprises, and communication service providers. The company, which operates globally, is based in Everett, WA.
What's in the Box?
- Fluke Networks DTX-1800 (main unit)
- Fluke Networks smart remote
- (1) DTX-MFM2 Multimode Fiber Module set
- (1) DTX-SFM2 Single-mode Fiber Module set
- (1) DTX-OTDR-QMOD Compact OTDR Module set
- (2) 62.5/125 SC-SC and 50/125 SC-SC duplex test reference cords
- (2) Red multimode fiber mandrels for 50 micrometer fiber with 3 mm jackets (NF-MANDREL-50)
- (2) Gray multimode fiber mandrels for 62.5 micrometer fiber with 3 mm jackets (NF-MANDREL-625)
- (2) Category 6A/Class EA permanent link adapters
- (2) Category 6A/Class E channel adapters
- (2) Headsets for talk
- (2) AC chargers
- LinkWare PC software CD
- 128MB multimedia card (MMC)
- USB interface cable (Mini-B)
- RS-232 serial cable (IEEE 1394 to DB-9)
- Instructions for activating one year of Fluke Networks' Gold Support
- Carrying case
- Instructions
4. Fluke 117/323 Kit Multimeter and Clamp Meter Combo Kit For Residential And Commercial Electricians, AC/DC Voltage, AC Current 400 A, Includes Test Leads, TPAK And Carrying Cases
Feature
The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.Description
About the Fluke 117/323 KIT Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit Fluke 117/323 KIT Fluke Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit pairs the Fluke 117 multimeter with a Fluke 323 clamp meter for productive and effective troubleshooting in one total solution, including the new C115 durable soft carrying case for protection and easy meter transportation. Replaces: Fluke 117/322 KIT5. Fluke Networks SMC-9-SCLC Singlemode Launch/Tail Cable, for Testing 9 m LC Connections
Feature
For testing LC connectionsOne SC/LC 9 micron Singlemode cable for launch and tail
Compatable with the Fluke Networks Singlemode 9 micron Optifiber Pro and Fiber OneShot
160m 3m cable
Suggested use with the PA-SC
Description
OTDR Launch and tail cords let the tester measure the loss and reflectance of the first and last connectors in the cabling and also include them in the measurement of overall loss. Without launch and tail cords, no backscatter is available before the first connector nor after the last. Fluke Networks recommends that you use launch and tail cords when making an OTDR measurement. You should also use the launch/tail cord compensation function to remove the lengths of these fibers from the OTDR measurements. The tail cord used should have the same characteristics as the OTDR launch cord.6. Fluke Networks MMC-62.5-LCLC Multimode for Testing 62.5 m LC SmartLoop Connections
Feature
For testing LC SmartLoopOne LC/LC 62.5 micron Multimode cable
Compatable with the Fluke Networks Multimode 62.5 micron Optifiber Pro
105m 3m cable
Description
OptiFiber Pro SmartLoop OTDR enables automated testing and analysis of two fibers in a single test. This process automatically separates the two fibers for individual pass/fail analysis, display, and reporting. Not only does this cut the testing time by at least half, it also enables bi-directional testing without moving the OTDR to the far end. In addition to getting the job done quicker, SmartLoop OTDR further enhances the ease and speed of testing in environments where the far end is difficult or even dangerous to reach because the OTDR never has to be moved to the far end. And when you run the SmartLoop test, the bi-directional averaging is done on the testerthere is no need to use additional software to accomplish bi-directional averaging on tested links.7. Fluke Networks FTK1000 SimpliFiber Pro Multimode Fiber Verification Kit, Fiber Tester
Feature
Dual-wavelength testingTests multimode and single mode fiber
Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter
Description
Fluke FTK1000 Network Accessory Kit FTK1000 806.8. Fluke Networks MMC-50-SCLC Multimode Launch/Tail Cable, for Testing 50 m LC Connections
Feature
Connector Type: SC/LC50 m
For use with OptiFiber Pro OTDR and DTX-1800 OTDR
Description
Fluke Networks MMC-50-SCLC Multimode Launch Cable, 50 m, 105m Length, SC/LC9. Fluke Networks MT-8200-49A MicroMapper Copper Cable Network Wiremap Verification Tester
Feature
Cable tester for simple verification of wiremaps and identification of faults with LEDsTesting of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs
Remote identifier enables one-person testing
Tone generator for tracing installed cables hidden in walls, floors and ceilings
Easy-to-read fault display on cable tester
Description
MicroMapper Twisted Pair Cable Tester10. Fluke 1AC II VoltAlert Non-Contact Voltage Tester
Feature
Voltbeat technology and continuous self test so you always know it is workingUpon detection, tip glows and beeper sounds, IP Rating: IP 40
20 volt to 90 volt AC control circuit model also available
CAT IV 1000 V for added protection,Operating Altitude : 3000 meters
Voltage sensing ranges: Nominally, 90 V AC to 1000 V AC
A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage
Description
Simply touch the tip to a terminal strip, outlet or cord. When the tip glows red, and the unit beeps, you know there's voltage in the line. Electricians, maintenance, service, safety personnel can quickly test for energized circuits and defective grounds on the factory floor, in the shop. Continually tests its battery and its circuit integrity with a periodic double flash visual indication using fluke voltbeat technology. It comes with a two year warranty. It detects line voltage from 90vac - 600vac (1AC-AI-II).11. Fluke Networks OptiFiber & CertiFiber Pro QUAD OTDR and OLTS for Fiber Optics Certification and Troubleshooting, V2, with WiFi & Inspection
Feature
Multiple wavelengths (850, 1300, 1310, 1490, 1550 and 1625 nm) support LAN, datacenters, PON, FTTx and outside plant applicationsIncludes Versiv 2 Mainframe & Remote, OptiFiber & CertiFiber Pro Quad OTDR & OLTS modules, CD, Cleaners, SC/LC Multimode & Single mode Cables, (2) OTDR source port adapters, Fiber Inspection Probe/Tips, Simplex Adapter, SC/LC SM TRC Kit, Wi-Fi, Calibration
Automated setup senses fiber characteristics and sets measurement parameters
Manual Expert mode allows simple adjustments to automated settings for detailed testing
Event Map automatically identifies events including connectors, splices, bends, and splitters
Gesture-based interface allows fast, in-depth trace analysis
Description
Fluke Networks OptiFiber Pro Series OTDRs make novices and experts faster. Automated trace analysis and setup supports applications including data centers, PON and outside plant. Advanced features include Manual Expert mode, pinch and zoom for in-depth trace analysis and Smart Loop for bi-directional testing. Supports Versiv copper and fiber loss certification modules.12. Fluke Networks PA-ST Source Port Interchangeable ST Adapter for OptiFiber Pro OTDR
Feature
Connector Type: STFront shell easily removed by hand for easy inspection and cleaning
Description
Source Port Interchangeable ST Adapter for use with the Fluke Networks OptiFiber Pro OTDR13. Fluke Networks MMC-62-SCST Multimode Launch/Tail Cable, for Testing 62.5 m ST Connections
Feature
For testing ST connectionsOne SC/ST 62.5 micron Multimode cable for launch and tail
Compatable with the Fluke Networks Multimode 62.5 micron Optifiber Pro and Fiber QuickMap
105m 3m cable
Suggested use with the PA-SC
Description
MULTIMODE LAUNCH CABLE 62.5UM SC/ST14. Fluke 323 True-RMS Clamp Meter
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohmsTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V