Shopping for the best st to lc fiber patch cable is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy st to lc fiber patch cable. Don’t worry any more! We spend many hours to review and compare st to lc fiber patch cable to make the short list for you. Let’s check which product is suitable with you.
Best st to lc fiber patch cable
1. StarTech.com 2m Multimode 62.5/125 Duplex Fiber Patch Cable LC - ST (FIBLCST2)
Feature
Connect fiber network devices for high-speed transfers with LSZH rated cable2 meter Duplex Fiber Cable / LC to ST / Multimode Patch Cable / 2m Multimode 62.5/125 Duplex Fiber Optic Cable LC to ST
OM1 (62.5/125) multimode fiber / LSZH (Low-Smoke, Zero-Halogen) cable jacket
Immune to electricty interference / Ideal solution for data applications requiring high speed data transmission
Guaranteed reliability with a lifetime warranty
Description
The FIBLCST2, 2-meter (6.6ft) Multimode 62.5/125 Duplex Fiber Patch Cable is terminated with one LC (male) connector and one ST (male) connector, to provide the necessary connection between fiber networking devices for high-speed, long distance networks.
This LC-ST patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. Making it ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.
To ensure optimum performance, our multimode fiber duplex cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.
Backed by Lifetime Warranty, our LC-ST Multimode Fiber Patch cable is guaranteed to provide long-lasting dependability, and top quality performance.
2. StarTech.com 3m Multimode 62.5/125 Duplex Fiber Patch Cable LC-ST (FIBLCST3)
Feature
Connect fiber network devices for high-speed transfers with LSZH rated cable3 meter Duplex Fiber Cable / LC to ST / Multimode Patch Cable / 3m Multimode 62.5/125 Duplex Fiber Optic Cable LC to ST
OM1 (62.5/125) multimode fiber / LSZH (Low-Smoke, Zero-Halogen) cable jacket
Immune to electricty interference / Ideal solution for data applications requiring high speed data transmission
Guaranteed reliability with a lifetime warranty
Description
The FIBLCST3 3-meter (10ft) Multimode 62.5/125 Duplex Fiber Patch Cable is terminated with one LC (male) connector and one ST (male) connector, to provide the necessary connection between fiber networking devices for high-speed, long distance networks.
This LC-ST patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. Making it ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.
To ensure optimum performance, our multimode fiber duplex cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.
Backed by Lifetime Warranty, our LC-ST Multimode Fiber Patch cable is guaranteed to provide long-lasting dependability, and top quality performance.
3. FiberCablesDirect - 0.5M OS2 LC ST Fiber Patch Cable | 10Gb Duplex 9/125 LC to ST Singlemode Jumper 0.5 Meter (1.64ft) | Length Options: 0.5M - 300M | 1gb 10gb smf UPC sfp 10gbase sm PVC ofnr lc-st
Feature
Fiber Cable Description: OS2 LC ST Fiber Patch Cable 0.5 Meter | 10Gig Singlemode Duplex Corning 9/125 Fiber Optic Core/Cladding. OFNR (riser rated), zip-cord reinforced, 2.0mm outer diameter, yellow PVC jacket. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries.Fiber Patch Cable Details: 0.5 Meter (1.64 feet), Duplex (2 fiber strands), 1Gbps/10Gbps, Single Mode Fiber (SMF), LC to ST Terminated, Fiber Optic Patch Cables / Jumper Cords.
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding.
Optical Mode Type: OS2 (9/125 Singlemode) - 9 micron core, 125 micron cladding. 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, data services supported. ISO / IEC 24702
Durable Construction, Commercial Grade | Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected delivery priority.
Description
0.5 Meter LC ST Singlemode Fiber Patch Cable | 10Gb OS2 Duplex 9/125 SMF LC/UPC to ST/UPC Jumper Cord.A durable, OFNR (riser rated), yellow PVC jacket, 2.0mm outer diameter, zip-cord reinforced, UV resistant, water resistant, fire retardant and immune to electrical interference. Assembled with 10Gb Corning 9/125 micron SMF core/cladding and terminated with duplex, small form factor (sff), 1.25mm ceramic ferrule LC connectors (includes pre-installed duplex lc clips), and push/lock 2.5mm stainless steel ferrule ST connectors for easy install and management in high density cable environments. Connectors have a maximum connector loss of 0.50dB with a typical connector loss of 0.30dB and typical return loss of -55dB.
Engineered for fast and reliable Singlemode connectivity between switches, transceivers, media converters, patch panels and other SFP Singlemode equipment & applications. Typically used in vertical pathways, shafts, conduit, and spaces between building floors. Single mode fiber is designed for long distance 10Gb Ethernet applications with maximum attenuation of 0.4 dB/km and a transmission distance of 5km to 10km @ 1310nm / 30km to 40km @ 1550nm. All FiberCablesDirect cables are tested in accordance with ANSI/TIA/EIA-455-171-A-2001 attenuation standards by a qualified fiber optic technician then carefully packaged with test results. We also provide a lifetime warranty on all our products we sell.
There is no order too large or too small. Bulk orders for lengths above 35m may have an additional day or 2 lead time depending on the quantities ordered, however, most orders ship the same day. Expedited USPS and UPS services available including Next-Day, 2-Day, 3-Day and Ground shipping options. FedEx is also available for international orders.
We do it right with a 100% lifetime warranty, quality products, superior packaging and fast delivery anywhere in the world.
4. LC to ST Fiber Patch Cable Single Mode Duplex - 1m (3.28ft) - 9/125um OS1 / - Beyondtech PureOptics Cable Series
Feature
Beyondtech high-quality LC to ST Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services.This fiber OS1 LC ST Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications.
This SM fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm.
This LC to ST Single mode Duplex OS1 fiber patch cords operate at -20C to +70C and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm.
OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) - LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors.
Description
Easy installation
Beyondtech OS1 LC to ST Fiber Patch cable simplify the installation process and reduce the total cost of ownership of your project, due to pre-terminated fiber intrinsic plug-and-play characteristic.10 Gigabit Performance
OS1 Singlemode laser optimized fiber patch cords are designed to be used in LAN, WAN and SAN 10GB networks and is able of handling the most challenging telecommunications data transmission requests.Properly tested
Each patch cord is individually and rigorously tested and certified to be within accurate optical insertion loss.Cable Specifications
Wavelengths: 1310 and 1550nm Yellow Jacket Bend Radius - Minimum / 5cm Cable Jacket (3.00mm) Operating Temperature / -4 to 158 F (-20 to +70 C) Singlemode 9/125um Standard Zip Cord OS1 fiber conforms to ITU-652.D, TIA/EIA 492 CAAA Multiple Sizes Available LC - ST connector (Fiber patch cord) Beyondtech LC ST Patch Cord feature precision hold, plastic ferrule LC , ST connectors . They comply with all ANSI/EIA/TIA standards. LC to ST Singlemode Duplex are used to connect LC and ST devices and are suitable for Gigabit Ethernet, video, multimedia, premise installations, fiber optics patch panels, fiber optic transceiver and fiber optic network, industrial, and military applications. Connectors feature dust caps on the tips for protection.5. LC to ST Fiber Patch Cable Multimode Duplex - 1m (3.28ft) - 50/125um OM2 - Beyondtech PureOptics Cable Series
Feature
Beyondtech high-quality LC to ST Fiber Patch Cable 50/125 OM2 Multimode fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, commercial, LAN, SAN and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services.This fiber LC ST Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications.
This MM fiber has an orange color jacket with a 3.00 mm diameter. OM2 cables have a 500 MHz-km bandwidth and a 2.3dB/km maximum attenuation at 850 nm light sources and a 500 MHz-km bandwidth and a 0.6dB/km maximum attenuation at a 1300 nm wavelength.
This LC to ST Multimode Duplex OM2 fiber patch cords operate at -20C to +70C and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm.
OM2 patch cords are suitable for backbone, riser and horizontal configurations - LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors.
Description
Easy installation
Beyondtech OM2 LC to ST Fiber Patch cable simplify the installation process and reduce the total cost of ownership of your project, due to pre-terminated fiber intrinsic plug-and-play characteristic.EMI immunity
OM2 Multimode fiber is immune to many environmental factors, such as Electromagnetic Interference and Radio-Frequency interference, so it is possible to run patch cords next to industrial equipment without any problem.Properly tested
Each patch cord is individually and rigorously tested and certified to be within accurate optical insertion loss.Cable Specifications
Wavelengths: 850 and 1300nm Orange Jacket Bend Radius - Minimum / 5cm Cable Jacket (3.00mm) Operating Temperature / -4 to 158 F (-20 to +70 C) Multimode 50/125um Standard Zip Cord OM2 fiber conforms to ITU-651, TIA/EIA 492AAAA Multiple Sizes Available LC /ST connector (Fiber patch cord) Beyondtech LC ST Patch Cord feature precision hold, plastic ferrule connectors . They comply with all ANSI/EIA/TIA standards. LC to ST Multimode Duplex are used to connect network devices and are suitable for Gigabit Ethernet, video, multimedia, premise installations, fiber optics patch panels, fiber optic transceiver and fiber optic network, industrial, and military applications. Connectors feature dust caps on the tips for protection.6. 5m Fiber Optic Cable - Multimode Duplex 62.5/125 - LSZH - LC/ST - OM1 - LC to ST Fiber Patch Cable
Feature
Connect fiber network devices for high-speed transfers with LSZH rated cable5 meter Duplex Fiber Cable / LC to ST / Multimode Patch Cable / 5m Multimode 62.5/125 Duplex Fiber Optic Cable LC to ST
OM1 (62.5/125) multimode fiber
LSZH (Low-Smoke, Zero-Halogen) cable jacket
Immune to electricty interference
Ideal solution for data applications requiring high speed data transmission
Guaranteed reliability with a lifetime warranty
Description
The FIBLCST5, 5-meter (16ft) Multimode 62.5/125 Duplex Fiber Patch Cable is terminated with one LC (male) connector and one ST (male) connector, to provide the necessary connection between fiber networking devices for high-speed, long distance networks.
This LC-ST patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. Making it ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.
To ensure optimum performance, our multimode fiber duplex cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.
Backed by Lifetime Warranty, our LC-ST Multimode Fiber Patch cable is guaranteed to provide long-lasting dependability, and top quality performance.
7. 2 Meter Multimode Duplex Fiber Optic Cable (62.5/125) - LC to ST - Orange
Feature
Corning fiber and claddingPVC Zip Cord, OFNR Jacketing
Pre-terminated with connectors on both ends
100% inspected and tested for insertion loss
2 Meter in length
Description
Features
Ultra Spec Cables' Fiber Optic Cables are pre-terminated with LC to ST Connectors, so they are ready for deployment in any Faster Ethernet Network environment. Our cables are manufactured using Corning Optical Fiber and OFNR Rated PVC Zipcord jackets, which are lightweight, flexible and non-flammable. Each cable is factory tested for insertion and return loss to ensure maximum performance and realibility. They're available in lengths from 0.3M up to 300M and in SC, ST, FC and LC configurations. Available in OS2 Singlemode 9 micron, OM1 Multimode 62.5 micron, OM2 Multimode 50 Micron and OM3 10Gb (10 Gigabit) Laser Optimized Multimode 50 Micron.
Benefits
Plug and play cables save time in the field since there is no onsite termination necessary. Fiber is preferred over copper because it provides increased bandwidth, low signal loss and is immune to interference. Fiber can carry data longer distances with more reliability and with less repeaters required. It's a long term, cost effective solution to securely transmit data requiring high transfer rates (i.e. Gigabit Ethernet, Fibre Channel and Infiniband).
Applications
- Computer Networking - Transfers data at a higher rate of speed.
- Telecommunications - Carries data to internet, cable TV and phone subscribers at greater bandwidths.
- Healthcare Industry - Used in imaging devices for exploratory or surgical procedures.
- It's also found in many industrial applications as well as R & D Labs in the above mentioned field.
Our cables are compatible with all makes and models of switches, routers, enclosures, patch panels, media converters, SFP modules and other network components.
8. 1m Fiber Optic Cable - Multimode Duplex 62.5/125 - LSZH - LC/ST - OM1 - LC to ST Fiber Patch Cable
Feature
Connect fiber network devices for high-speed transfers with LSZH rated cable1 meter Duplex Fiber Cable / LC to ST / Multimode Patch Cable / 1m Multimode 62.5/125 Duplex Fiber Optic Cable LC to ST
OM1 (62.5/125) multimode fiber
1 meter Duplex Fiber Cable / LC to ST / Multimode Patch Cable / 1m Multimode 62.5/125 Duplex Fiber Optic Cable LC to ST
Immune to electrical interference
Description
The FIBLCST1 1-meter (3.3ft) Multimode 62.5/125 Duplex Fiber Patch Cable is terminated with one LC (male) connector and one ST (male) connector, to provide the necessary connection between fiber networking devices for high-speed, long distance networks.
This LC-ST patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. Making it ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.
To ensure optimum performance, our multimode fiber duplex cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.
Backed by Lifetime Warranty, our LC-ST Multimode Fiber Patch cable is guaranteed to provide long-lasting dependability, and top quality performance.
9. 10m Fiber Optic Cable - Multimode Duplex 62.5/125 - LSZH - LC/ST - OM1 - LC to ST Fiber Patch Cable
Feature
Connect fiber network devices for high-speed transfers with LSZH rated cable10 meter Duplex Fiber Cable / LC to ST / Multimode Patch Cable / 10m Multimode 62.5/125 Duplex Fiber Optic Cable LC to ST
OM1 (62.5/125) multimode fiber
Immune to electricty interference
Description
The FIBLCST10 10-meter (32.8ft) Multimode 62.5/125 Duplex Fiber Patch Cable is terminated with one LC (male) connector and one ST (male) connector, to provide the necessary connection between fiber networking devices for high-speed, long distance networks. This LC-ST patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. Making it ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration. To ensure optimum performance, our multimode fiber duplex cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability. Backed by Lifetime Warranty, our LC-ST Multimode Fiber Patch cable is guaranteed to provide long-lasting dependability, and top quality performance.10. StarTech.com 1m Multimode 50/125 Duplex Fiber Patch Cable LC - ST / 50 Micron Fiber Optic Cable LC to ST
Feature
Connect fiber network devices for high-speed transfers with LSZH rated cable1 meter Duplex Fiber Cable / LC to ST / Multimode Patch Cable / 1m Multimode 50/125 Duplex Fiber Optic Cable LC to ST
OM2 (50/125) 500MHz multimode fiber / LSZH (Low-Smoke, Zero-Halogen) cable jacket
Immune to electricty interference / Ideal solution for data applications requiring high speed data transmission
Guaranteed reliability with a lifetime warranty
Description
1m Multimode 50/125 Duplex Fiber Patch Cable LC - ST
The 50FIBLCST1 1m LSZH LC to ST Fiber Cable features 50/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex multimode applications.
View larger
View larger
This LC-ST patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. Making it ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.
Each Duplex 50/125 (OM2) Multimode Fiber Patch Cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability and is backed by our lifetime warranty.
StarTech.com Advantages
LSZH-rated cable, suitable for installations under restrictive building codes High-speed, high bandwidth transmissions over Gigabit Ethernet/fiber channel networks Resistant to pulls, strains, and impacts during your cable installations and maintenance
Product Applications
Use in Gigabit Ethernet and Fiber Channel applications Ideal solution for data applications requiring high speed data transmission Broadband systems Telecommunication/Data communication
Product Features
- 1x LC MM male connector
- 1x ST MM male connector
- OM2 (50/125) 500MHz multimode fiber
- LSZH (Low-Smoke, Zero-Halogen) cable jacket
- Attenuation loss meets or exceeds industry standards
- Molded connectors