Shopping h11 led canbus adapter has never been easy. You may come many of website, read h11 led canbus adapter reviews, check the price... It will really makes you headache and tired. Don't worry! I've found ways to make it less painful. Let's find in below article.
Shopping h11 led canbus adapter has never been easy. You may come many of website, read h11 led canbus adapter reviews, check the price… It will really makes you headache and tired. Don’t worry! I’ve found ways to make it less painful. Let’s find in below article.
Best h11 led canbus adapter
1. Auxbeam H8/H11 LED Conversion Kit Error Free Wiring Harness Adapter
Feature
Attention: Please check your headlight bulb and vehicle correct plug size before purchase our adapter. It is not compatible for Mini Cooper2 Pcs of H8/H9/H11 canbus wiring harness adapter, for H11 headlight bulbs, Voltage: DC 12V-14V,4A MAX Current, Apply to headlight and fog light.
Solve the problems caused by low current draw when use LED bulb upgrade halogen bulb
Perfect solution for detect the LED headlight failure/bulb rejection, hyper flashing,no flashing or burnt out bulb indications etc
Prevent OBC warning error code,canbus error on specific vehicles
Description
Introduction:
2x H8/H9/H11 canbus wiring harness adapter
Solve the problems caused by low current draw when use LED bulb upgrade halogen bulb
Perfect solution for detect the LED headlight failure/bulb rejection,hyper flashing,no flashing or burnt out bulb indications etc
Prevent OBC warning error code,canbus error on specific vehicles
Technical Specification:
Socket Type: H8/H11
Voltage: DC 12V-14V
4A MAX Current
Usage: Headlight, fog light
Package Included: 2x H8/H11 canbus wiring harness adapter
2. SOCAL-LED 2x A10 H11 H8 EMC Headlight Kit CANBUS HID LED Decoder Anti-Flicker Error Canceller Relay Resistor Adapter
Feature
Genuine Can-Bus decoder, eliminated error code on dash for 90% of the cars.Cancel error message cause by On-Board Computer 'bulb out' or 'bulb failure' warnings error.
Pre-wired for direct plug and play, bypass wiring like regular load resistors. Plug one end to the light bulb and the other end to the car socket; if bulb would not turn on at first, flip the plug 180 degree (reverse polarity) to the car socket and it should works.
Work with most After Market HID Kit or LED Headlight Kits, this decoder can solve 90% auto headlight issue, so please confirm your bulb size at OSRAM Sylvania or Philips websites or contact with the seller. There are various complex headlight compatibility reasons, but we will keep on researching and upgrading the decoder to solve more auto headlight issue. Make sure that the positive and negative sign are match from the light bulb to the decoder.
Disclaimer: Even this decoder size is compatible for your vehicles, yet we can not guarantee it fixes all problems as car system differs from one to another. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION!
Description
Why need LED Decoder? When a HID or LED kit is installed in newer car models or cars with a computer controlled unit CAN BUS, often there is a error code showing on the dash board or the HID lights keep flickering and would not stay on. This is due to the fact that the HID or LED kit is triggering a bulb out warning signal in your car's computer control unit.
Where our LED Headlight Bulbs Stand Out:
Latest technology Hybird EMC works for both HID and LED Conversion Kits, strong canbus chip built-in compatible even with the new car computer System. Our decoder is designed to balances out the current draw of the LED kit and would offset the warning signals on the dash board. It will also eliminate headlight flickering that is caused by the Vehicle's computer not recognizing the low wattage LED bulb.
True Plug-N-Play: Easy to install, ture Plug-n-Play AMP connectors.
Fitment:
1) Please double check the size of the bulb with your car before purchase. The amazon bulb fitment guide will tell you if these fit your vehicle However! It will not tell you if its for fog, low beam or high beam.
2) Please check your car Owner's Manual.
3) We Suggest you to use Sylvania or Philips automotive lamp replacement guide online to ensure you purchase the right size bulb.
Notice!
Cars known to require this are: Chrysler 300C, Dodge Magnum, Dodge Charger and some Audi, BMW, and Mercedes Benz (usually late models only).
3. Alla Lighting H11 H8 H9 H11LL H8LL H9LL 50W 6Ohm Error Free LED Lights Load Resistor Adapter Fix Flashing Blinking Canbus Bypass Wiring Harness Decoder for Upgrading LED Headlight Fog DRL Light
Feature
2pcs H11/ H8 50W 6 Ohm LED Load Resistors for LED Error Fix or Anti-Flicker; Easy Installation: All-in-One Design. Plug and Play Setup for LED Headlight Conversion Kits. Average Installation time: 15-20 minutesAluminium Shell; Excellent heat dissipation. One LED resistor is required for each bulb
Solves the problem of LED bulbs flashing/flickering when installed. please make sure metal resistance not contact with plastic wire to prevent the plastic from melting.
Clears OBC and CAN-BUS warning errors on the dashboard when LED bulbs are installed.
Disclaimer: This decoder can be compatible for most vehicles, yet we can not guarantee it fixes all problems. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION! Cross reference number: H11, H8, H9, H11LL, H8LL, H9LL, etc; Used for: halogen headlights, fog lamps,daytime running light ( DRL ) uprading led bulbs.
Description
This listing features one pair ( 2 pieces) H11/ H8 50W 6ohm load resistor to avoid the error code on the dash board or flicking on-off due to led bulbs draw much less current than stock lamp, directly plug and play, easy installation.
Features:
--- Directly plug and play, easy installation,
--- Cancel Error Message cause by OBC (On-Board Computer) Check. Cancel Hyper Blink on LED Headlight
--- Permanently resolve the annoying LED headlight flickering problem
--- Includes 2 pieces H11/ H8 50W 6ohm load resistors per order.
4. LED Conversion Kit Headlight Canbus Error Free Anti Flicker Capacitors Resistor Wiring Harness Decoder-H8 H9 H11 (pack of 2)
Feature
1. LED Anti flicker capacitors only apply to LED headlight, can't work with DRL, compatible for 90% vehicle with CANBUS systems, can't work on some models of Jeep, Mini cooper,Toyota and Volkswagen Golf etc. We can not guarantee it works for all car models. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION!2. Socket Type: H8/H9/H11, Voltage: DC 9V-16V, 4A MAX Current. Package size: 18cm x 14cm x 4cm(7inch x 5.5inch x 1.6inch)
3. Easy and Simple installation-- Usually takes less than 20 minutes! "Plug-and-Play" in most vehicles, no other parts needed
4. Fix error code or flashing issues related to the low current draw when using LED bulbs upgrading the halogen bulbs, it can solves the problem of OBC warning error code, or bulb rejection, hyper flashing, no flashing or burnt out bulb indications and prevent error message and canbus error on vehicles
5. 100% QUALITY GUARANTEE, Your satisfaction is our TOP priority. 90-day warranty of money back or simply a replacement
Description
H8/H9/H11 LED Anti flikcer Warning Cancellers
Specification:
Socket Type: H8/H9/H11
Voltage: DC 9V-16V
4A MAX Current
Material: PVC
Weight: 0.15kg(0.33lb)
Package size: 18cm x 14cm x 4cm(7inch x 5.5inch x 1.6inch).
Package Included:
2 pcs of H8/H9/H11 canbus wiring harness adapter
NOTE: Not cutting or splicing! Simply twist your LED bulb onto the base, and twist the other end into your existing bulb socket. Unlike complex installation of 50W 6-Ohm load resistors.
This cable fits for CARS WITH COMPUTER CONTROLLED HEADLIGHTS,
Function:
1.Fixes error code or flashing issues related to the low current draw when using LED bulbs upgrading the halogen bulbs.
2. It can solves the problem of OBC warning error code, or bulb rejection, hyper flashing, no flashing or burnt out bulb indications and prevent error message and canbus error on vehicles.
3. Suitable for all cars that have computer controlled headlights.
5. AnyCar Led Headlight Decoder H11 H8 Canbus Resistor Anti-flicker Harness Headlight Bulb Decoder for LED Headlight Warning (H8/H9/H11/H16(JP))
Feature
Capacitor DecodersKOOMTOOM led headlight bulb decoders are capacitor decoders which transmit by pulse signal, much better than resistance decoder, it is environmental and engery saving;Powerful FunctionsSolves the problem of LED bulbs flashing/flickering when installed. please make sure metal resistance not contact with plastic wire to prevent the plastic from melting; FIX LED Headlight Lamp Out Message:Bulb Flashing or Flickering / Cancels Radio Interference and Light Turning off when Engine Starts / Cancels Error Message by OBC;
Easy InstallationAll-in-One Design. Plug and Play Setup for LED Headlight Conversion Kits. Average Installation time: 10-15 minutes;
Unsuitable Type of VehicleThese version of canbus decoders are not fit for: Mini, Volvo, Jeep Compass, Dodge, Lavida, BMW X1, Benz B Series, Chrysler PT Cruiser, DRL bulbs. (For fog light bulbs, we suggest this version: https://www.amazon.com/dp/B07L5LR5RV), If needed for these car models, please contact us for help before orders, thank you!
Kindly NoteCars are very complicated for the LED bulb upgrade,while we try to be as accurate as possbile with our listings,But still can not make 100% correct. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION!
Description
Specifications:1. Model: H1 H3 H4 H7 H8 H9 H11 H10 9005 9006 HB3 HB4 9004 9007 H13 D1S D2S D3S D4S
2. Votage: DC12-24V
3. 2pcs/set
When will you need a decoder?
While you install led headlights into your car and meet the problems like the situation below, you may need a decoder.
(1) While you turn on the light after installation, the bulb keep flashing.
(2) Computer shows error of headlights.
(3) The bulb still keep lighting for a while although you have turned off the light.
(4) Lighting is every dimmed, not bright as normally.
Functions:
1. Fit to Germany cars which need electronic decoding.
There is a CANBus electronic inspect for the light while you turn on the engine of Germany cars, so it needs electronic decoding. And our decoder can offer this electronic decoding function. For some Germany cars, the system will also check the working power of the headlights bulbs after you turn it on. In this situation, you still need to add a resistor on the headlight bulbs to satisfy the demand of power.
2. Fit to pulse power supplied cars.
Pulse power supplied capacitance is a technology to reduce the heat value of halogen bulbs, make the lifespan be longer, and save more power on working. But led headlights need constant current supplied, not pulse power supplied this kind of intermittent power supply. So while you install the led headlights into the car with pulse power supplied device, the led headlight bulbs will keep flashing or flash and then lights off. In this situation, decoder will be a large capacitance and store up the electric on it and keep supply to the led headlights bulb current constantly. (If meet pulse power supplied problem, you can ask 4S store to revise your car into constant current supply too.)
3. A small electronic component for Toyota cars
There is a high beam signal light on Toyota cars, which will be turned on by a electronic component of in our decod
6. SiriusLED H11 H9 H8 LED Canbus Decoder cancel error message fix led bulb on and off flickering problem adapter pack of 2
Feature
Pack of 2 LED Headlight Decoder, Size H11 H9 H8, Plug and play installationFix: LED headlight bulb-out message, U.S. brand car's Headlights that flicker-and-turn off while upgrade to LED, Cancels Radio Interference while upgrade to LED headlight
Note: Don't use on HID light, This decoder only work on LED headlight, If you have any question about fitment and car model please contact us direct from Amazon message to double check
Common Vehicle brand need Decoder while upgrade to LED Headlight: Mini, Ford, GMC, Dodge, Chevrolet, Chrysler, JEEP, Volkswagen Etc...
2 Year SiriusLED warranty from the date of purchase. warranty include replacement or exchange if confirmed manufacture defect or damaged while delivery
7. Autolizer LED Headlight Kit Error Free CanBUS Adapters - H11 (H8, H9, H11B) - Plug & Play - Computer Warning Canceller Resistor Decoders and Fix Anti-Flicker
Feature
Easy Installation: All-in-One Design. 100% Plug and Play Setup for LED Headlight Conversion Kits.Fix: Bulb Flashing or Flickering / Cancels Radio Interference and Light Turning off when Engine Starts / Cancels Error Message by OBC
Cancel Error Message cause by OBC (On-Board Computer) Check. Cancel Hyper Blink on LED Headlight
Canbus LED Decoders / Resistors NO Modication needed. Eliminates error warnings or bulb failure warnings in Mercedes, BMW and other vehicles.
Disclaimer: We can not guarantee it fixes all flickering issues, certain car model require different type of canceller containing a capacitor or resistors. Please contact us for support if you have issues.
Description
Autolizer LED Headlight Kit Error Free CanBUS Adapters - H11 (H8, H9, H11B) - Plug & Play - Computer Warning Canceller Resistor Decoders and Fix Anti-FlickerDesigned to prevent "bulb out" error messages from appearing on your vehicle's dashboard, the LED warning canceller is easily installed between the CANbus aftermarket LED headlight and your vehicle. The plug-and-play warning canceller has a 4 Amp maximum and operates at a 12-14 VDC.
Fixes error code or fast blinking issues related to the low current draw when using LED bulbs upgrading the halogen bulbs.
It will solve the problem of OBC warning error code, or bulb rejection, hyper flashing, no flashing or burnt out bulb indications and Prevent error message and canbus error on vehicles.
*Disclaimer* May or may not work on Dodge & Chrysler vehicles.
8. Pair of DDM Tuning LED Headlight Decoder Error Free Anti Flicker Canbus Adaptor, 1 Year Warranty (H8 / H11)-FBA
Feature
DDM Tuning LED Headlight Decoders, Easy Installation, Plug and playDesigned to work with most LED headlights our LED Decoders prevent flickering and error messages on vehicles with Canbus systems.
Each module is housed in a waterproof casing with input and output for quick installation.
For bulb size: H8, H9, H11
Sold as pair. 1 Year Warranty.
Description
Do you want to upgrade your headlights to LED but have a vehicle with a Canbus system? If so, adding a pair of our plug and play LED Headlight Decoders will put your mind at ease. Designed to work with most LED headlights our LED Decoders prevent flickering and error messages on vehicles with Canbus systems.Each module is housed in a waterproof casing with input and output for quick installation.
Sold as a pair
Installation: Plug and play
One Year Warranty
9. Alla Lighting S-HCR 2018 Newest Version 10000 Lumens Extremely Super Bright Cool White High Power SUPER Mini LED Headlight Bulb All-in-One Conversion Kits Headlamps Bulbs Lamps (H11 (H8, H9))
Feature
(Set of 2) Petite Design, fits for all the vehicles even though the vehicles with dust cover.10000 lumens(5000 lumens per bulb) without dark spots; Color: 6000K ~ 6500K cool white.Genuine high power, premium quality and high illumination CREE LED Chips, Newest technology 6063 aviation aluminum heat sink design for longer life span & further light output area.
Works underwater! Rainproof driver, housing, and fan works even in extreme situations: Driver and connectors level IP65
Life span: More than 30,000 hrs in 25C ambient; Mini Design, easy installation and fitment. For most vehicles, just directly plug-n-play, yet for some European vehicles or newest vehicles, it may require to install the load resistors to avoid the error code or blinking.
Fully ONE YEAR warranty. Application: Headlight replacement. Cross reference number: H11, H8, H9, H11LL, H8LL, H9LL ,etc.
Description
Alla Lighting S-HCR 2018 Newest Version Latest Design with ball fan LED Headlight Conversion Kits-Perfect Replacement the Halogen bulb
Alla Lighting pursues to offer the best valuable guaranteed led light bulbs for the customers, this led headlight adopts the original reflection light output with high illumination custom high illumination and premium quality CREE led chips,6063 Aviation Aluminum and red copper vacuum tube & best turbine blade heat sink for much better heat dissipation to achieve longer lifespan & much further lighting distance.
Here is S-HCR LED Headlight specification
LED Chip Type: Premium quality, high power and high illumination of CREE chips.
Heat Dissipation Technology::Newest technology ball fan -heat sink.makes the bulb much better heat dissipation to achieve much longer lifespan up to 30000h.
High illumination light: Each bulb light output will be up to the maximum 5000 lumens in perfect condition (total 10000 lumens in total for both led headlight.
Easy installation: For most vehicles, just Plug-N-Play, car installation manual included. Yet for some European vehicles or newest version, your vehicles may require to install the load resistor or decoder to avoid the error coder or blinking-off issues. This happens due to led bulbs draw much less current than stock lamp.
True 6000K~6500K Cool White Lighting: Crystal clear daytime white lighting. Plus "Instant-On" capability with Petite-design, fits all the vehicles even though with the dust cover.
10. PHILIPS Headlight LED CANbus Adaptor for H8 / H11 / H16 12V LED Bulbs Set of Two 18954C2
Feature
Specially designed for Philips LED H8 / H11 / H16 bulbRemoves dashboard signal errors
Ensures ideal functioning of high beam indicators
Eliminates flickering
Easy to install