What are criterias of the best ethernet switch power over ethernet? It is not easy to find the answer. We spent many hours to analyst top 10 ethernet switch power over ethernet and find the best one for you. Let's find more detail below.
What are criterias of the best ethernet switch power over ethernet? It is not easy to find the answer. We spent many hours to analyst top 10 ethernet switch power over ethernet and find the best one for you. Let’s find more detail below.
Best ethernet switch power over ethernet
1. NETGEAR GS305P 5-Port with 4-Port PoE Gigabit Ethernet Switch | Desktop | 55.5W PoE Budget | Sturdy Metal | Fanless | Plug-and-Play | Unmanaged
Feature
Cost-effective 5-port PoE Gigabit switch with 55.5W total budgetIdeal for small installations of 4 PoE devices (IP Phone, Wired surveillance camera, Wireless Access Point)
Plug-and-play, simple set up with no software or configuration needed
Quiet operation, energy efficient and sturdy metal case for anywhere quality installation
Energy efficient with up to 60% lower power consumption
Description
5 port gigabit switch; 5 port gigabit switch unmanaged; 5 port gigabit switch fan less; best 5 port gigabit switch ; best rated 5 port gigabit switch ; best value 5 port gigabit switch.2. TP-Link 5 Port Gigabit PoE Switch | 4 Port PoE 56W | 802.3af Compliant | Shielded Ports | Traffic Optimization | Plug and Play | Sturdy Metal (TL-SG1005P)
Feature
5-Gigabit ports with auto-negotiation sensing the link speed of a network device per portIdeal for small installations of 4 PoE devices (IP Phone, Wired surveillance camera, Wireless Access Point)
Max Wattage w/PoE with devices connected: 55w
Plug-and-play, simple set up with no software or configuration needed
LIMITED LIFETIME WARRANTY and 24/7 Tech Support
Description
TL-SG1005P3. TRENDnet 5-Port Unmanaged 10/100 Mbps PoE Switch with 4 PoE Ethernet Ports, 802.3af (TPE-S50)
Feature
4 x 10/100 Mbps PoE ports and 1 x 10/100 Mbps port with 31 W total power budget1 Gbps switching capacity and 56 KB RAM Buffer
Sturdy metal switch
Get setup in minutes with Plug and Play installation
Use with a TRENDnet PoE Splitter to network and power non-PoE devices
Up to 40% energy savings with GREENnet technology
LED indicators convey port status
TRENDnet's Industry leading Lifetime Warranty with unlimited 24/7 Technical support
Description
The 5-Port 10/100 Mbps PoE Switch, model TPE-S50, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras. The TPE-S50 offers four 10/100 Mbps PoE Ethernet ports and one 10/100 Mbps Ethernet port. It supports PoE (802.3af) devices with a 31 Watt power budget. Plug and Play this sturdy metal switch for reliable high speed PoE networking.4. NETGEAR 24-Port Gigabit Ethernet Smart Managed Plus PoE Switch (JGS524PE) - with 12 x PoE @ 100W, Desktop/Rackmount, and ProSAFE Limited Lifetime Protection
Feature
SIMPLE SETUP - Setup and configure with easy-to-use web-browser based interface. The switch does not support IEEE 802.3ad Link Aggregation or Link Aggregation Control Protocol (LACP) groups.POWER-OVER-ETHERNET - 24-port Gigabit Ethernet switch with 16 PoE ports (802.3af) providing up to 15w per port with 100w total PoE power budget
ESSENTIAL NETWORKING - Segment and prioritize your traffic with VLAN, QoS, IGMP Snooping, rate limiting and traffic monitoring
EASY-MONITORING - Monitor your network status and your cabling with the port statistics and cable health
FLEXIBLE PLACEMENT - DESKTOP / 1U Rack mountable form factor
ProSAFE Lifetime Protection - Lifetime Limited Hardware warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert
Description
The NETGEAR ProSAFE JGS524PE 24-port Gigabit PoE Web Managed (Plus) Switch provides fundamental network features that will help optimize the performance of business networks. On top of the plug-N-play Gigabit Ethernet connectivity, the JGS524PE also offers essential networking features such as VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), rate limiting and traffic monitoring. 12 of the ports are PoE ports with a total power budget of 100W and can power devices such as IP phones, IP surveillance cameras and wireless access points with just an Ethernet cable. NETGEAR ProSAFE Web Manged (Plus) Switches are an exceptional value for businesses looking to add intelligence to their network beyond what unmanaged switches can provide.5. UBNT Systems EdgeSwitch XP ES-8XP 8-Port Advanced Power Over Ethernet Switches PoE Pro
Feature
Ubiquiti EdgeSwitch XP ES-8XP 8-Port Advanced Power over Ethernet Switches Gigabit and PoE ConnectivityThe EdgeSwitch XP delivers reliable passive PoE and Gigabit connectivity to attached Ubiquiti devices and other devices that support passive PoE.
The EdgeSwitch XP is designed to simplify deployment, consolidating the delivery of data and passive PoE (as needed).
The EdgeSwitch XP supports 24V or 48V passive PoE to power multiple devices on your network.
The EdgeSwitch XP ES-8XP is a Replacement for the TS-8-PRO.
Description
Model: ES-8XP EdgeSwitchXP Advanced Power over Ethernet Switches The EdgeSwitchXP delivers reliable passive PoE and Gigabit connectivity to attached devices and other devices that support passive PoE. The EdgeMAX EdgeSwitch 8XP, PoE is an advanced gigabit PoE managed switch. Ubiquit introduces the Advanced Power over Ethernet Switches, EdgeSwitchXP from Ubiquit. EdgeSwitchXP delivers reliable passive PoE and fast 10/100/1000 Mbps connectivity to attached Ubiquit devices and other devices that support passive PoE. To connect your PoE devices, simply enable PoE in the easy-to use EdgeSwitch XP Configuration Interface. Each port can be individually configured to provide PoE, so both PoE and non-PoE devices can be connected.6. NETGEAR FS728TLP 24-Port Fast Ethernet Rackmount PoE Smart Managed Pro Switch | 12-Port 100w Power-over-Ethernet | ProSAFE Lifetime Protection
Feature
FAST ETHERNET - 24-port 10/100 Fast Ethernet switch with 4 Gigabit Copper and 2 Gigabit SFP ports in a 1U rackmount form factorPOWER-OVER-ETHERNET - 12 PoE ports (802.3af) providing up to 15.4w per port with 100w total PoE power budget
COMPREHENSIVE LAYER2 NETWORKING - VLAN, QoS, IGMP Snooping, rate limiting, Link aggregation, STP, SNMP and ACL
EASY MANAGEMENT - Setup, configure and monitor with easy-to-use web-browser based interface and IPv6 management supported
AUTOMATIC VLAN - Auto Voice/Video VLAN simplify and speed up VoIP and IP Surveillance deployments
PROSAFE LIFETIME PROTECTION - Lifetime Limited Hardware warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert
Description
The NETGEAR Fast Ethernet Smart Switches offers comprehensive L2 feature set and enhanced performance and usability. They are purposely designed for small and medium-sized networks where reliability and performance are key, and operational cost savings and ease of management are must-haves. There are four products in this series: 26- and 50- port Fast Ethernet Smart Switch, 28-port Fast Ethernet with 12 PoE ports and 28-port high powered with 24 PoE/PoE+ ports. All switches come with dedicated Gigabit SFP ports for either Gigabit and/or fiber uplinks. These ProSAFE Fast Ethernet Smart Switches from NETGEAR are the optimized solutions providing the best value at an affordable SMB price point.7. Amcrest 5-Port POE+ Switch with Metal Housing, 4-Ports POE+ Power Over Ethernet Plus 802.3at 58w (AMPS5E4P-AT-58)
Feature
5-Port POE Desktop 10/100 Power Ethernet Switch with 4-Port POE+Supports maximum 30w power to each POE port (POE+ 802.3at)
58w Power available to all POE ports
Fast Ethernet POE standard IEEE 802.3at wih Auto-MDIX Auto-Negotiation
Plug and Play, Compact desktop size, LED activity indicator lights, 1-Year Warranty
Description
The Amcrest AMPS5E4P-AT-58 is a layer-2 PoE Ethernet switch. It can reach lightning protection level 3. The device can support up to 2 IEEE802.3at or 4 IEEE802.3af PDs (The total PoE power is 58W). In order to acquire smooth monitoring, it's recommended to connect max 4 IP cameras at a bit rate of less than 4Mbps respectively.8. BV-Tech 9 Port PoE+ Switch (8 PoE+ Ports | 1 Uplink Port) - 120W - 802.3af/at
Feature
8 Ports at 10/100Mbps + 1 Uplink port at 10/100Mbps150W of Max Power (15.4W Per Port)
Complies with IEEE 802.3af PoE Standard
Auto-MDI/MDI-X Function for any Port
Compact Size
Description
The POE-SW800E is a Fast Ethernet Switch with 8 10/100Mbps PoE ports. It provides up to 120W of power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable (sold separately), supplying industry-standard IEEE 802.3af power. Ports automatically detect devices, PoE requirements, speed, duplex, and cable type. The POE-SW800E is suitable for IP security cameras, but also works with wireless access points, VoIP phones, and other devices that use power over Ethernet.9. Amcrest 5-Port POE+ Power over Ethernet POE Switch with Metal Housing, 4-Ports POE+ 802.3at 65w (AMPS5E4P-AT-65)
Feature
5-Port POE Desktop 10/100 Power Ethernet Switch with 4-Port POE+Supports maximum 30w power to each POE port (POE+ 802.3at)
65w Power available to all POE ports
Fast Ethernet POE standard IEEE 802.3at wih Auto-MDIX Auto-Negotiation
Plug and Play, Compact desktop size, LED activity indicator lights, 1-Year Warranty
Description
Amcrest 5-Port POE+ Switch / Power over Ethernet / POE / 4-Ports POE+ 802.3at 65w / AMPS5E4P-AT-6510. WT-GAF-12v12w 802.3af Gigabit Poe Splitter with 12 Volts output. Power Over Ethernet for Non-poe Devices like IP Cameras to 328 Ft for PoE Switches
Feature
Instantly convert PoE to 12 volts for non-PoE DevicesUse with any 802.3af PoE switch like Cisco or Netgear with 10/100 or gigabit speeds
For Foscam, Wansview, Airsight, EasyN, Escam, Q-See, Apexis, Wanscam and other non-PoE devices For the Roku Ultra, see our GAT-12v25w
Plug and play - Converts and divides PoE
For expert technical support from Austin Texas, please call 512 479 0317
Description
Remote Power for 12 volt 12 watt non-PoE devicesExtend power to 328 ft
This device is a
802.3af to 12v splitter with 2.1mm x 5.5mm dc plug
802.3af compatible for PoE switches
power and data input via Female RJ45
Male data only output RJ45
10/100/1000 gigabit operation.
To be used with a PoE switch either 802.3af or 802.3at or passive injector
Use this Splitter to power any 12 volt non-PoE device remotely, up to 328ft from the power source.
These devices share power and data in the ethernet cable. The splitter at the camera lowers the voltage to 12 volts to operate the device.
Other Options
To power up to many cameras from one power source, use either any PoE switch or use our 4, 8, 12 or 16 port, 48v injector and any non PoE switch.
WS-POE-12v-8x kit for 8 cameras with 12 volts
contact us for adapter options for 0.7 mm and 2.5mm
Other Voltages:
see WT-AF-5v10w for use with 5 volt devices
see WS-POE-5v-8x for 8 cameras with 5 volts
see USB versions for powering iPad or Tablets with microUSB and LIghtning
see microUSB version for dropcam and Raspberry Pi