It's hard to know which is good motorcycle lift stand for harley davidson. There are alot of motorcycle lift stand for harley davidson reviews on internet. In this article we suggest top 10 the best motorcycle lift stand for harley davidson for you. Please read carefully and choose what is the best motorcycle lift stand for harley davidson for you.
It’s hard to know which is good motorcycle lift stand for harley davidson. There are alot of motorcycle lift stand for harley davidson reviews on internet. In this article we suggest top 10 the best motorcycle lift stand for harley davidson for you. Please read carefully and choose what is the best motorcycle lift stand for harley davidson for you.
Best motorcycle lift stand for harley davidson
1. Goplus Motorcycle ATV Hydraulic Scissor Lift Jack Stand Quad Dirt Street Bike Hoist 1500 Lbs (Red)
Feature
Solid and Durable Design1,500 pounds of lift capacity, solid high-grade steel construction with red and black powder coated finish which protects the stand from rust and corrosion.Motorcycle Easy LiftAllows easy and controlled lifting of your off-road motorcycle, perfect for repair, maintenance, and storage.
Adjustable HeightFully adjustable deck height, lifting small vehicles up to 17 3/8" high allows it perfect fit for most bikes and safety lock with multiple locking positions for safety ensurance.
Recommended Use Swivel casters for easy to move, position and transport, it's designed to ideal lift for motorcycles, ATVs, tractors, personal watercraft and snowmobiles.
100% Risk-free Satisfaction Guarantee We are quite sure that you will be super-impressed with the DURABILITY, PORTABILITY and HIGH QUALITY of our motorcycle lift stand.
Description
DescriptionOur 1500LBS motorcycle /ATV lifts is Made from high strength steel. We offer the best motorcycle /ATV lifts for the hobbyist as well as the professional motorcycle shop. When loaded, the adjustable locking screws and wheels improve stability and safety. But it will also roll easily on four durable casters, making it easy to position, easy to adjust and easy to store. It can be used alone or with almost any motorcycle lift. It has a 1500 lb. capacity, made of solid steel and it's easy to use, and so strong it'll easily handle small vehicles like dirt bikes, jet skis and ATVs.
Feature
Brand new and high quality.
Solid high-grade steel construction which protects the stand from rust and corrosion.
Large handles makes it easy to lift and lower the motorcycle.
Top surface coated with non-slip pad for safety use.
Lift small vehicles up to 17 3/8" high.
New design with a durable top plate, base frame and main shaft.
Swivel casters for easy to move, position and transport.
Specifications
Color: black
Material: Steel
Maximum lift height:17"
Minimum height:5.5"
Product size:32.5"(L)X 16"(W)X5.5"(H)
Platform size:13 3/8"(L) X 2 7/8"(W)
Caster size:2 3/8"
Lift & Jack Type: Floor jacks
Lift Capacity: 1500 lbs
weight:70lbs
2. Extreme Max 5001.5044 5001.5044 1000 lbs. Motorcycle Scissors Jack-Wide
Feature
Extends up to 14" heightDesigned for center lifting using 7/8" socket or wrench (sold separately)
Durable rubber padding on platform
Heavy-duty steel frame
1100 lb. weight capacity; will not lift trikes
Description
The center-lift design of the Extreme Max Wide Motorcycle Scissor Jack is perfect for most motorcycle maintenance needs. Without the optional dolly, the jack lifts to an extended reach of 14 while the 15-1/8 x 9 platform holds your bike with a rubber padding that prevents scratching and adds stability. The jack is operated manually by using a 7/8 socket or wrench (sold separately). Measurements: Extended height: 14; Collapsed height: 3-3/8; Base: 15-1/8 x 9; Lifting platform: 15-1/8 x 9. *Do not use an impact-style wrench to raise or lower the jack.3. Smartxchoices Red/Black 1500 lbs Motorcycle ATV Hydraulic Scissor Jack Lift Stand Quad Dirt Street Bike Hoist
Feature
Brand New And Good Quality. Ideal Lift For Motorcycles, ATVs, Tractors, Personal Watercraft And SnowmobilesLift Capacity Of 1,500 Pounds / 680kg, Swivel Casters Make It Easy To Move, Position And Transport
3-Position Locking Mechanism,Assembly Required
Includes Jack, Handle, Two Tie-Down Straps, Two Adapter Bars And Manual
CE/ANSI Certified for machinery and product safety.
Description
Smartxchoices 1500 LB Hydraulic Motorcycle Hoist Jack is ideal for stabilizing your motorcycle, ATV or UTV while you detail or make repairs.The jack doubles as a support stand. Tested for reliability and safety to meet ASME PALD 2009 standards.
Smartxchoices Hydraulic ATV Motorcycle Hoist Jack has 4 following advantages over other models on the market:
A: Material Steel, Capacity lbs. 1,500, Application Motorcycle, ATV, UTV. Tubular frame is constructed of high-grade steel and built to exacting standards for quality and durability.
B: Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust Paint is oil and grease
C: 1,500-lb. capacity Moves easily on 2 locking rear casters Includes foot pump for hands-free operation 3 lockable lift heights accommodate a variety of motorcycles, ATVs, UTVs and more.
D: Rubber grip pads help protect the motorcycle frame from damage , Welded tie-down brackets help to keep the load secure Includes convenient pull handle with rubber comfort grip to make moving easily.
Specifications
Minimum Height :4.53" / 115mm
Maximum Height :14.76" / 375mm
Lift & Jack Type: Floor Jacks
Lift Capacity: 1500 Lbs / 680kg
Color: Black/Red
Material:Steel
Item Weight:62 Lbs / 28kg
Package Size: 32.28"X16.34"X4.92" / 820*415*125mm
Package Include:
1x Jack
1x Handle
2x Tie-Down Straps
2x Adapter Bars
1x Manual
4. OTC 1545 Motorcycle Lift
Feature
Lift has a 1,500 pounds capacity and 17 inch long skids that will lift the largest and widest cruisersLowest clearance available 3-1/2 inch at lowest level with a wide lift range of 3-1/2 inch to 16-3/4 inch
Removable handle provides 360 Degree access to load
Features include foot pedal release locking rear casters automatic safety lock and two ratcheting tie down straps for safety
Two-year limited warranty
Description
The OTC Motorcycle Lift has a 1,500 pounds capacity and 17 inch long skids that will lift the largest and widest cruisers. With the lowest clearance available, 3-1/2 inch at lowest level, with a wide lift range of 3-1/2 inch to 16-3/4 inch. The removable handle provides 360 Degree access to load and other features include foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety. Two-year limited warranty.5. VIVOHOME Steel Hydraulic Motorcycle ATV Lift Jack Hoist Stand 1500Lb
Feature
It is easy to service and clean your motorcycle or ATV by lifting it up off the groundRanges from 4.5" to 15" high to accommodate just about any motorcycle or ATV on the market. It has a 1500 lb lifting capacity so they can handle even the largest of machines
3 position safety locks to secure the load in place once it is lifted
Come with a handle and swivel casters on real wheels to easily move jack. Rubber padded lift arms protect your motorcycle or ATV frame while lifting it
Can be operated by either the manual foot pedal or it can be attached to a compressed air line and operate using the pneumatic lift cylinder
Description
Brand Profile:VIVOHOME is a US registered trademark based on California. We are devote ourselves to offering high quality products at the most reasonable prices. Hope you could find your favorite collections from us.
Operation Instructions:
1. Place jack on a hard level surface
2. To avoid them form slipping during the raising operation. ALWAYS first determine the center of the weight load.
3. Place the jack under the item so that the lift saddle is positioned under the center of the weight load.
4. Pump the foot pedal until the lift saddle comes in contact with the load to be lifted: proceed to lock wheel casters. ALWAYS check to be sure that the saddle and the load are postioned correctly before raising the jack.
5. Use foot pedal to raise load: Be sure that safety lock is secured in one of three stated lock positions once desired height is reached.
6. Apply tie-down straps once load has been raised to desired height. Thoroughly tighten straps.
7. Stabilize loaded jack on a hard surface for maximum balance by adjusting locking screws.
Product Specification:
-Material: Steel
-Color: Red, Black
-Package Dimensions: 32.28"L*16.34"W*4.92H"
-Item Weight: 62lbs
Package Include:
-1 x Lift Jack
-1 x Handle
-2 x Tie-Down Straps
-2 x Adapter Bars
-1 x Manual
Product Warranty:
We assure the item you received is 100% safe and sound. For any defective item, please contact our customer service for satisfaction guaranteed solution.
6. APlusLift 1500LB Air Operated Motorcycle Lift Table (Scissor Lift, With Sides, 48" wide, Free Business Delivery)
Feature
Two Years Parts Warranty8.8 Construction Grade Hardware
Stable Scissor Frame with Precise Pivot Shafts and Thick Gauge Steel
Strong and Durable Paint
Free Service Jack
Description
APlusLift MT1500 is a 1500lb Heavy Duty Air Operated Lift Table. It is one of the most popular lifts with a Front Wheel Clamping Vise, a Drop Out Tail, a 3 Stage Adjustable Front Extension, a 20" long Drive-on Approach Ramp, and a FREE Service Jack.
Specification- Adjustable Table Lengths: 84" - 97" - 110"
- Weight Capacity: 1,500 LB
- Table Length with Approach Ramp: 128"
- Table Length without Approach Ramp: 110"
- Adjustable Front Extension: 84" (Table Alone), 97" (Stage 1 Extension), 110" (Stage 2 Extension)
- Stage 1 Extended Length with Approach Ramp: 115"
- Stage 1 Extended Length without Approach Ramp: 97"
- Stage 2 Extended Length with Approach Ramp: 128"
- Stage 2 Extended Length without Approach Ramp: 110"
- Drop Out Tail Dimensions: 14" x 21"
- Removable Approach Ramp Length: 20"
- Table Width without Extension: 24"
- Table Width with Extension: 48"
- Table Steel Thickness: 1/8"
- Safety Locking Positions (to top of table): 19.5", 21.75", 23.5", 25", 27", 28.5", 30"
- Maximum Lifting Height (to top of table): 33"
- Lowered Height (to top Of table): 7"
- Lifting Table Surface Area with Extension: Table: 48" x 84"; Stage 1 Ext.: 48" x 97"; Stage 2 Ext.: 48" x 110"
- Service Jack: Max Lifting Height: 15"; Lowered Height: 3.5"; Weight Capacity: 1,000 LB
- Air Requirements: 90 PSI
- Shipping Weight: 500 LB
7. Venom Motorcycle Bike Front Tire Wheel Chock Lift Stand For Harley Davidson Street Glide
Feature
Venom Heavy Duty Wheel ChockWill Fit Most 17" - 21" Front Wheels
Designed For Securing Motorcycles Upright For Transporting, Maintenance, And Storage
Brand: Venom | Quantity: 1 Wheel Chock / Stand
Fitment: Harley Davidson Street Glide
Description
Features:
- Designed for securing motorcycles upright for Transporting, Maintenance, and Storage
- This Venom Motorcycle Wheel Chock is made of High Grade Steel
- With 3 adjustment positions this stand/chock will fit most 17" - 21" front wheels
- Rubber end caps prevent surface scratches
- To remove, pull back on bike and chock will automatically release the wheel
Specification:
- Color: Black
- Material: High Grade Steel
- Condition: 100% Brand New
Installation:
- Easy to assemble
- Will fit 17" - 21" front wheels
- Motorcycle Wheel Chock can be used as a free standing floor stand or mounted to any flat surface.
Package Includes:
- 1x Lightweight Motorcycle Wheel Chock
- 4x Concrete Anchors (Mounting Hardware)
- Instructions not included
8. ZENY 1100 LB Motorcycle Center Scissor Lift Jack Hoist Stand Bikes ATVs (#01)
Feature
Solid steel construction in a red and black powder coated finishTwo (2) variable screw adapters
Simple crank operation
12 cm removable crank handle
Fits Cruisers, Choppers, Can Am Spyder, Trikes, Sport Bikes
Description
SPECIFICATIONS:Two wings on each side for stability and balance
Compact dimensions: 18" x 6" x 3.5" (45 cm x 15.5 cm x 9 cm)
Lifting Range: 3.5"-17" (9-43 cm)
Capacity: 1100 lb
9. Extreme Max 5001.5038 Hydraulic Motorcycle/ATV Jack - 1700 lb. Capacity
Feature
Hydraulic motorcycle/ATV jack with rubber saddle padsFoot-pedal operated hydraulic lift; Lift range: 4.5" to 14.5"
Heavy-duty caster wheels and powder coated steel frame
1700 lb. Capacity
Two-year warranty
Description
Elevate your motorcycle or ATV for minor repairs, oil changes, cleaning and more. The heavy-duty lift has a 1700 lb. capacity and easy foot-pedal operation for lift and release. Lift range: 4.5" to 14.5; welded safety locks at 9", 12", 14.5". Extension T-Handle included for improved maneuvering. Jack lifting surface stands 4.5" fully collapsed, be sure your machine has enough clearance before purchasing this product. This jack is intended for lifting only. Always use front and rear wheel supports.10. Venom Motorcycle Bike Front Tire Wheel Chock Lift Stand For Harley Davidson Ultra Tour Glide Classic
Feature
Venom Heavy Duty Wheel ChockWill Fit Most 17" - 21" Front Wheels
Designed For Securing Motorcycles Upright For Transporting, Maintenance, And Storage
Brand: Venom | Quantity: 1 Wheel Chock / Stand
Fitment: Harley Davidson Ultra Tour Glide Classic
Description
Features:
- Designed for securing motorcycles upright for Transporting, Maintenance, and Storage
- This Venom Motorcycle Wheel Chock is made of High Grade Steel
- With 3 adjustment positions this stand/chock will fit most 17" - 21" front wheels
- Rubber end caps prevent surface scratches
- To remove, pull back on bike and chock will automatically release the wheel
Specification:
- Color: Black
- Material: High Grade Steel
- Condition: 100% Brand New
Installation:
- Easy to assemble
- Will fit 17" - 21" front wheels
- Motorcycle Wheel Chock can be used as a free standing floor stand or mounted to any flat surface.
Package Includes:
- 1x Lightweight Motorcycle Wheel Chock
- 4x Concrete Anchors (Mounting Hardware)
- Instructions not included