Shopping for the best guitar output jack is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy guitar output jack. Don’t worry any more! We spend many hours to review and compare guitar output jack to make the short list for you. Let’s check which product is suitable with you.
Best guitar output jack
1. Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware
Feature
Full-contact Output Jack2 concave ground contacts
2 concave hot leads
Increased Voltage Handling Capacity
Cleaner, Stronger, Clearer Signal
Description
A standard " jack utilizes a pressure ground and a single hot positive connection; as actual grounds are not connected to the sleeve, the pressure of the tip dictates how good the ground is, resulting in inferior sound quality (I.e., that "static sound"). Not only is the signal strength compromised and weaker, the actual sound is inferior because you never have a solid ground and the poor connection at the tip contact is so minimal. With the new Pure Tone Jack, the audio jack as you know it will never be the same again. The Pure Tone audio jack has 2 actual concave ground contacts that hug the sleeve on both sides and 2 concave hot leads wrapping both sides of the positive tip. Not only is the signal much cleaner, stronger, and clearer, but all aspects of the EQ spectrum are also greatly improved while eliminating those nasty spikes. In addition, the Pure Tone jack has greatly increased the voltage handling capacity while leaving a smaller footprint for those tight spaces. The new standard jack has been born! The Pure Tone multi-contact jack was invented by Dave Linsk, lead guitarist of the International recording group Overkill. The jack was created as a result of constant failures of the current production jack models that have been available on the market until now. As it turns out, the 100 year old audio jack design really needed some changes to make it road worthy!2. 2 Pack of Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware
Feature
Full-contact Output Jack with 2 concave ground contacts and 2 concave hot leadsThe Stereo Pure Tone jack contains dual rings for optimal signal and lowest possible noise.
100% greater surface area at all contact points creates a more stable connection; thus, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes.
The Pure Tone jack allows for increased current handling at 500 volts for high current applications.
Tensioned design locks cable securely in place while the increased metal mass carries more signal.
Description
A standard " jack utilizes a pressure ground and a single hot positive connection; as actual grounds are not connected to the sleeve, the pressure of the tip dictates how good the ground is, resulting in inferior sound quality (I.e., that "static sound"). Not only is the signal strength compromised and weaker, the actual sound is inferior because you never have a solid ground and the poor connection at the tip contact is so minimal. With the new Pure Tone Jack, the audio jack as you know it will never be the same again. The Pure Tone audio jack has 2 actual concave ground contacts that hug the sleeve on both sides and 2 concave hot leads wrapping both sides of the positive tip. Not only is the signal much cleaner, stronger, and clearer, but all aspects of the EQ spectrum are also greatly improved while eliminating those nasty spikes. No more noise crackle caused by pressure grounds! In addition, the Pure Tone jack has greatly increased the voltage handling capacity while leaving a smaller footprint for those tight spaces. The new standard jack has been born! The Pure Tone multi-contact jack was invented by Dave Linsk, lead guitarist of the International recording group Overkill. The jack was created as a result of constant failures of the current production jack models that have been available on the market until now. As it turns out, the 100 year old audio jack design really needed some changes to make it road worthy!3. Switchcraft Output Jack, Mono - 6 Pack
Feature
J11 Input/Output Mono Jack - Pack of Six (6)1/4" diameter - for use with most US-made Guitars & Basses
High Quality Switchcraft Jack
Description
Switchcraft brand Mono Jack. Very high quality and reliability.4. Switchcraft #11 Mono Input/Output Jack - Bulk Lot of 10
Feature
J11 Input/Output Mono JackBulk Lot of 10
1/4" diameter - for use with most US-made Guitars & Basses
High Quality Switchcraft Brand Jack
Description
Switchcraft brand Mono Jack. Very high quality and reliability.5. Fender 1/4 2-Conductor Guitar/Bass Output Jack
Feature
Includes Lock Washer and NutMade in USA
Description
The Fender 1/4" Output Jack is a 2-conductor unit with mounting hardware. It's made to replace a loose or broken output jack on your Fender electric instrument.6. KAISH Stereo Copper Guitar Bass 1/4" Barrel Jack Cylinder Input Output Jacks with 4 Pins Stereo or Mono Jack Black Nickel
Feature
Inside hole diameter: 1/4" (6.35mm); Thread diameter: 11.8mm;Length without poles: about 39.5mm; Total length including poles: about 48.5mm
This is a very good quality Barrel Jack with 4 pins,but not those inferior jacks made in cheap factories
4 Pins Stereo Jack (The shorter two pins are main conductor pins); Of course, you can use this item as Mono Jack as well
Package includes: 1x Barrel Jack
Description
Made of Copper with High quality7. Pre-Wired Switchcraft #11 Jack for Guitar
Feature
Top Quality Components Assembled With Extreme CareSwitchcraft #11 Mono Jack w/ Vintage Style Gavitt Cloth Pushback Wire
Heat Shrink Covered Connections Many Years of Trouble Free Use
Sleeve Lug - Black Wire; Tip Lug - White Wire
Description
All too often replacing a faulty output jack is more difficult than it needs to be. The original wires are too short to easily solder the connections near the tiny output jack cavity. This easily solves that problem by allowing you to make clean solder connections from inside the larger cavity of your guitar with extra long leads (1 Foot Each) of Pre-Tinned Vintage Style Cloth Pushback Wire. The jack solder lugs are covered in heatshrink for many years of trouble free use.8. YMC Oval-Indented-Guitar-Jack-Plate30-BK Oval Indented Guitar Jack Plate & Socket Black High Quality, 1 Pack
Feature
Made of metal material with Black finish; Shape: Oval.Ideal for electric guitar building , Replace your worn out parts.
Mounting hole center to center is 37MM, 3.5MM mounting hole diameter.
Come with 1/4 inch 6.35mm Jack and screws, ready to use.
Package Includes: 1 pc Oval Jack socket ,2pcs screws
Description
100percent Brand new, never used
100percent like the picture shown
SIZE:
Width at the widest point of the plate: 2.7cm
Measurement between the centre of the 2 screw holes: 3.8cm
Replace your worn out parts (Oval Indented)
Color: black
Package Include:
1* black jack plate
We manufacture all kinds of instrument parts and conduct The direct model so that our price is very low with high quality.
9. Switchcraft 11 Mono Female 1/4-Inch Jack with Nut and Washer, Nickel Finish
Feature
Made in USAHeavy duty metal construction.
Nickel Finish
Description
Switchcraft 11 Mono Female 1/4 Inch Jack. Made for Panels, Plates, Guitaes and All Other Inputs.10. Timiy 4Pcs Loaded Guitar Output Jack Plug Socket With Plate Mono for Fender Strat Stratocater Style Electric Guitar 1/4" (Silver)
Feature
Package Include: 4 x Silver Jack Plate; 8 x Mounting Screw,1/4" (6.35mm) momo jack socket; mounting hole center to center is 37mm,Replace your worn out parts Boat Style (Oval Indented)The board with a board and a socket,Ideal for Fender Stratocaster or similar guitars,Ideal for electric guitar building ,replace your worn out parts
This input output boat style jack is fit for electric guitar, it can give your guitar a bit of an upgrade
Standard square plate which is used commonly.1/4"mono jack socket,This shiny boat-style jack plate brings a nice shiny finish to your instrument
Boat style Mono guitar output jack plate for Fender Stratocaster Squier style guitars
Description
100% Brand New, Never Used.Ideal for electric guitar building , Replace your worn out parts.
Come with 1/4 inch 6.35mm Jack and screws, ready to use.