Shopping 1/2 copper tubing compression tee fitting has never been easy. You may come many of website, read 1/2 copper tubing compression tee fitting reviews, check the price… It will really makes you headache and tired. Don’t worry! I’ve found ways to make it less painful. Let’s find in below article.
Best 1/2 copper tubing compression tee fitting
1. Anderson Metals Brass Tube Fitting, Tee, 1/2" Compression x 3/8" Bottom Male Pipe
Feature
Three piece construction - nut, sleeve and body with attached insertUse with copper, brass, aluminum, or plastic tubing
Standard fittings use short nuts
Easy to disassemble no flaring tool required
Primary uses water, gasoline, oil and vacuum lines
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
Three piece construction nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degree F to +250 degree F temperature range. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. Thread size: 9/16"-24 and 11/16"-20.2. Anderson Metals Brass Tube Fitting, Tee, 1/2" Compression x 3/8" Side Male Pipe
Feature
Tee with three openings for connecting and branching three tubesCompression connections on two ends and a male NPT connection on the other
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Operating temperature range of -65 to +250 degrees F
Three piece construction - nut, sleeve and body
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
This Anderson Metals tee compression tube fitting is made of brass, has compression connections and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting is T-shaped and has three openings to connect and branch three tubes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Tube dimensions for tees are represented as A x B x C. A and B indicate the main run on the fitting, and C indicates the branch. It has compression connections on the main run and the branch and a male National Pipe Taper (NPT) connection on the other main run for connecting to a female NPT threaded tube. The NPT threads create a tighter seal than straight threads. The compression connections have a three-piece construction nut, sleeve, and body. Tightening the nut against the sleeve creates a compression seal against leaks, and loosening the nut allows disassembly of the joined parts. This tee compression tube fitting can be used with copper, brass, aluminum, or plastic tubing, has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
3. Parker A-Lok 8ET8-B Brass Compression Tube Fitting, Tee, 1/2" Tube OD
Feature
Branch tee to connect tubing on the run ends and on the branchFitting connects to tubing on all ends
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications
For use with copper tubing
Description
The Parker A-Lok ET-B series compression tube fitting is made of brass, and connects three lengths of tubing in a branch tee. This coupling is for a fixed connection between tubing made of copper. Twin ferrule compression fittings connect to tubing for a leak-resistant seal in high-pressure, high-vacuum, and high-vibration applications. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. It is commonly used in chemical, petroleum, power generation, laboratory, and medical device plants.
Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.
4. Legines Brass Tube Fitting, Tee, 1/2 Compression x 3/8 Bottom NPT Male Pipe, Pack of 2
Feature
Three piece construction - nut, sleeve and body with attached insertUse with copper, brass, aluminum, or plastic tubing
Standard fittings use short nuts,Easy to disassemble no flaring tool required
Primary uses water, gasoline, oil and vacuum lines
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
compression fittings are economical and offered in both extrusions and forgings. These compression fittings require no flaring, soldering, tube preparation or special tools to operate. Compression fittings are especially useful in installations that may require occasional disassembly or Partial removal for maintenance since the fitting can be broken and remade without affecting the integrity of the joint. Compression fittings are also used in situations where a heat source, in particular a soldering torch, is prohibited.5. Ips 86592 Shock-Buster Water Hammer Compression Tee Arrestor, Lead Free, 1/4" x 1/4"
Feature
Type Aa For Single FixtureElegant design and finish
The product is manufactured in United States
Description
Type Aa For Single Fixture. Upc Listed, Asse 1010 Certified, Ipc Compliant. Lead-Free.6. Watts P-650 Quick Connect Globe Valve, 1/2-Inch CTS
Feature
The product is manufactured in chinaThe product is highly durable and easy to use
Easy installation and easy handling
Watts quick connect products are the easiest method on the market for joining copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing
Plastic quick connect 1/4-turn ball valve with 1/2-Inch CTS on both inlet and outlet
Perfect for DIY pipe repair
Approvals include FDA, ANSI/NSF-61, NSF-14, CSA B1375, ASTM F877, NSF-UP, and IAPMO ASSE 1061-2006
Rated for 250psi at 75 degrees F and 100psi at 180 degrees F
Description
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged7. Jmf Compression Tee 1/2 " Compression X 1/2 " Compression X 1/2 " Yellow Brass 400 Psi Lead Free
Feature
Compatible Pipe Material: Copper, Aluminum and PlasticFits For: Low to Medium Pressure Applications
Average Lead Content: Lead-Free
Material Type: Yellow Brass
Maximum Pressure: 400 psi
Description
End 1 Diameter: 1/2 in. End 1 Type: Compression. End 2 Diameter: 1/2 in. End 2 Type: Compression. End 3 Diameter: 1/2 in. End 3 Type: MPT. Material: Yellow Brass. Fits For: Low to Medium Pressure Applications. Compatible Pipe Material: Copper, Aluminum and Plastic. Maximum Pressure: 400 psi. Color: Brass. Material Type: Yellow Brass. Average Lead Content: Lead-Free.8. Midland 18-116 Brass Compression Forged Reducing Tee, 1/2" x 1/2" x 1/4" Size
Feature
0.94 inch0.81 inch
0.16 lb weight
Description
Use with copper, aluminum and thermoplastic tubing. Not recommended for steel tubing. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved. Not recommended for application using gaseous media.9. Megairon Stainless Steel SS 316 Heavy Duty Clamp,Sanitary 1.5" Tri Clamp Clover With Single Pin for 50.5MM OD Ferrule Flange(US Stock)
Feature
The item will be dispatched from US,Within one week receiveMain Color:Silver Tone,Easy tighten thumb screw
100% Brand New and High Quality,Made of by 316 Stainless Steel
The homebrew stuff sanitary male threaded pipe fitting to tri clamp clover sanitary hose connections
Fit for all other homebrew stuff sanitary fittings(Ex: Put your flange next to the top of a beer keg and they should be almost exactly the same size and the clamp will work for you,just like the professional breweries use)
Description
Data Sheet:
Ferrule OD Fits Tri-clamp
25.4MM/1/2"
38MM/1"
50.5MM/1.5"
64MM/2"
77MM/2.5"
89MM/3"
102MM/3.5"
115MM/4"
Megairon is an International Company for distributing professional pipe, fittings, and valves.
Meets International Organization for Standardization (ISO) standard 9002.
Package:
1 Pc Tri-clover Clamp
10. SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC
Feature
INSTALLS IN SECONDS: 1/2 inch tee pipe connector requires no special tools, no soldering, no crimping or glue. Just push to create a watertight sealCOPPER, PEX, CPVC: SharkBite tee pipe connector plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination
COMPATIBLE PRODUCT: Same as part number U362LFZ and U362LF
QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
CERTIFIED: SharkBite fittings are certified to 200 PSI and 200F and can be reused up to four times
Description
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
Connect pipe in seconds with relative ease using the SharkBite Push-To-Connect 1/2-Inch Straight Coupling. The SharkBite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, its as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. The SharkBite Straight Coupling Plumbing Fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.