What are the best brushless program card currently available to purchase? This article attempts to give you some answers to guide you in the process of purchasing the best brushless program card to suit your needs. In our buying guide, we outline certain features to consider when buying brushless program card. It is important to take time and research before you commit to purchasing.
What are the best brushless program card currently available to purchase? This article attempts to give you some answers to guide you in the process of purchasing the best brushless program card to suit your needs. In our buying guide, we outline certain features to consider when buying brushless program card. It is important to take time and research before you commit to purchasing.
Best brushless program card
1. Jrelecs Programming Card for RC Car Brushless ESC Electronic Speed Controller
Feature
Programming Card for RC Car ESC Brushless Electronic Speed Controller, which was specially designed for Brushless Electronic Speed Controller selled in our store.Description
Description:Low voltadge cut off voltadge: 3.1V/Cell 2.8V/Cell 3.3V/Cell No cut-off
Start mode:Medium soft strong
Max brake force: 25%,50%,75%,100%,
Max reverse force: 25%,50%,75%,100%,
Neutral range: 6%,9%,12%,work state,
Package Information:
Package size:9.5 * 8 * 6cm / 3.8 * 3.2 * 2.4in
Package weight:50g / 1.8oz
White box package
Package List:
1 * Programming Card
2. HobbyWing LED Program Card for Car ESC
Feature
This program box is used to program the brushless ESCSuitable for: XERUN series brushless ESC for car, EZRUN series brushless ESC for car (Version 2.0 or later)
Size: 88mm*58mm*14mm
Description
HOBBYWING was founded in 2005 as a high technology company for the research and development of electronics. We are very focused on the development of RC brushless power systems, as well as speed controllers for brushed RC models. Our continuing goal is to push the envelope in the RC world with our innovative and cutting edge designs.3. RC Program Card Electronic Speed Controller Programmer for RC Car 25A- 120A ESC
Feature
This program box is used to program the brushless ESCSuitable esc: 25A,35,45A,60A,80A,120A ESC
Used with: 1/8,1/10,1/12,1/14,1/16,1/18 rc car
Working voltage/currren: 5-6.5V/100mAh Size: 80x60x4mm(3.15x2.36x0.16inch). SATISFACTION GUARANTEED - We are dedicated to providing our customers with the best possible shopping experience. If you have any problem,please feel free to contact us.
A wrong tooth ratio can cause the motor to overheat. The motor temperature should be lower than 212 during the operation. Temperatures above 212 will weaken the magnet and may partly melt the coils and eventually damage the ESC (because of strong current)!!! To avoid potential risks such as ESC/motor damage or malfunction caused by overheat, start with a very small pinion first and check the ESC & motor temperatures regularly throughout the run. This is the only way to prevent overheating!!!
Description
RC Program Card Electronic Speed Controller Programmer for RC Car 25A- 120A ESCSpecifications:
This program box is used to program the brushless ESC
Suitable esc: 25A, 35A, 45A, 60A, 80A, 120A ESC
Used with: 1/8,1/10,1/12,1/14,1/16,1/18 rc car
Size: 80x60x4mm(3.15x2.36x0.16inch)
Working voltage/currren: 5-6.5V/100mAh
Package Including
1 * RC Program Card
4. GoolRC Programming Card for RC Car ESC Brushless Electronic Speed Controller
Feature
Low voltadge cut off voltadge: 3.1V/Cell 2.8V/Cell 3.3V/Cell No cut-offStart modeMedium soft strong
Max brake force: 25%,50%,75%,100%,
Max reverse force: 25%,50%,75%,100%,
Neutral range: 6%,9%,12%,work state,
5. ShareGoo RC Program Card Electronic Speed Controller Programmer for RC Car 25A-120A Brushless ESC
Feature
This program box is used to program the brushless ESC,suitable for 1/8, 1/10, 1/12, 1/14, 1/16, 1/18 RC car. 25A, 35A, 45A, 60A, 80A, 120A ESC.Low voltadge cut off voltadge: 3.1V/Cell 2.8V/Cell 3.3V/Cell No cut-off
Working voltage/currren: 5-6.5V/100mAh,Start modeMedium soft strong
Panel Size: 60x46x6mm(2.36x1.85x0.23inch);Cable Length:40mm/7.87in
A wrong tooth ratio will cause the motor to overheat. The motor temperature should be lower than 212 during the operation. Temperatures above 212 will weaken the magnet and may partly melt the coils and eventually damage the ESC. Please make sure that you operate this programming card in a correct condition.
Description
ShareGoo RC Program Card Electronic Speed Controller Programmer for RC Car 25A-120A Brushless ESCDescription:
1Low Voltage Cut-Off:The function is mainly to prevent the lithium battery pack from over discharging. When using lithium battery pack, please set the suitable value for low-voltage protection as your like.WARNING: Never use the default value "Non-protection" for lithium battery! 3.1V2.8V3.3VNon-Protection(default value 3.1V).
23 start modes: 3 start modes(Also called "Punch")from "soft"to "very aggressive"(default value Medium)
3Maximum brake force: 25A45A60A50%25%75%100%default value 50%,80A120A25%50%75%100%(default value 25%)
4Maximum reverse force: 25%50%75%100%default value 25%
5Neutral range: 9%(narrow)6%(Normal)12%(Wide)default value 9%
Programme Card Method:
1. Connect BEC wires with the programmer then turn on the ESC.80A120A press the keys to be not put
2. The Green LED flashes for 2 times then LED off, that is, the connectingprogrammer with ESC is successful, and the Red LED on presents the current value of that item. Otherwise, the connecting is failed.
3. Please press the Key"" to select differentprograms
4. Please press the Key"" to select different value of the current program
5. Please press the Key "Program" to confirm above selections, the Green LED on immediately and has gone out within 5 seconds, that is, this process is successful.
6. Please press the Key"Reset" to reset the factory setting.
Suitable esc: 25A, 35A, 45A, 60A, 80A, 120A ESC
Used with: 1/8,1/10,1/12,1/14,1/16,1/18 rc car
Working voltage/currren: 5-6.5V/100mAh
Panel Size: 60x46x6mm(2.36x1.85x0.24inch);
Cable Length:40mm/7.87in
Package weight:50g
Package include:
1 x RC Program Card
6. RC Program Card Electronic Speed Controller Programmer for RC Car 25A - 120A ESC (RED) by RCRunning
Feature
This program box is used to program the brushless ESCSuitable esc: 25A,35,45A,60A,80A,120A ESC
Used with: 1/8,1/10,1/12,1/14,1/16,1/18 rc car
Plug and Play: Program car is very easy to use, just plug into ESC and turn on, set desires values and it's that simple. Compact and Portable Size: The rc car Programmable could fit in a pocket so you can take it to the field or put it in a tool box.
A wrong tooth ratio can cause the motor to overheat. The motor temperature should be lower than 212 during the operation. Temperatures above 212 will weaken the magnet and may partly melt the coils and eventually damage the ESC (because of strong current)!!! To avoid potential risks such as ESC/motor damage or malfunction caused by overheat, start with a very small pinion first and check the ESC & motor temperatures regularly throughout the run. This is the only way to prevent overheating!!!
Description
RC Program Card Electronic Speed Controller Programmer for RC Car 25A- 120A ESC (RED) by RCRunning1Low Voltage Cut-Off: The function is mainly to prevent the lithium battery pack from over discharging. When using lithium battery pack, please set the suitable value for low-voltage protection as your like. WARNING: Never use the default value "Non-protection" for lithium battery! 3.1V2.9V2.7VNon-Protection
default value 3.1V
23 start modes (Also called "Punch") from "soft" to "very aggressive" default value Medium
3Maximum brake force: 25A35A45A60A50%25%75%100%default value 50%80A120A25%50%75%100%default value 25%
4Maximum reverse force: 25%50%75%100%default value 25%
5Neutral range: 9%(narrow)6%(Normal)12%(Wide) default value 9%
programme card Method
1. Connect BEC wires with the program car then turn on the ESC.80A120A press the keys to be not put
2. The Green LED flashes for 2 times then LED off, that is, the connecting program car with ESC is successful, and the Red LED on presents the current value of that item. Otherwise, the connecting is failed.
3. Please press the Key "" to select different programs
4. Please press the Key "" to select different value of the current program
5. Please press the Key "Program" to confirm above selections, the Green LED on immediately and has gone out within 5 seconds, that is, this process is successful.
6. Please press the Key "Reset" to reset the factory setting.
Package Including
1 * RC Program Card
7. Shaluoman 25A-120A Brushless ESC Program Card Electronic Speed Controller Programmer for RC Car
Feature
More good, functional and reasonable ESCs are in "Aiyouxi RC Hobby ESC". We offer the best service and products for you.Water-proof and dust-proof for all-weather races;
External programming port, easy to connect to the Program Card when setting the ESC;
Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment;
Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection;
Description
Note :This card is only applicable to the models sold in our shop.Water-proof and dust-proof for all-weather races;
(Note: please uninstall the cooling fan before using this ESC in water; Clean and dry it soon after the use for avoiding the connectors get rusty.)
External programming port, easy to connect to the Program Card when setting the ESC;
Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment;
9 steps of acceleration(punch) adjustment from "soft" to "Very aggressive" to fit for different kinds of models, tires and tracks;
Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection;
One-button(the "SET" button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings;
Compatible with the optional device-the portable Digital LED Program Card, especially convenient or outdoor use.
Instuctions
1. Connect BEC wires with the receiver
2. Connect motor wires with ESC
3. Turn on the transmitter
4. Connect battery pack with ESC then switch on the ESC.
5. When the connection of motor and battery is finished, the motor emits"Beep-Beep"tone.
6. When the throttle stick is in the neutral position, the motor re-emits "Beep-Beep"tone.
7. The ESC is workable.
Package information:
Package size: 8.1* 5.5*1.2cm/3.18*2.16*0.47in
Package weight: 32g
8. GoolRC S3674 2650KV Sensorless Brushless Motor 120A Brushless ESC and Program Card Combo Set for 1/8 RC Car Truck
Feature
Precision engineered for maximum energy conversionHigh purity copper windings maximizes efficiency
Super smooth and accurate throttle linearity
Built-in high-efficient and high-power 6.1V/3A SBEC
Mutiple protection features: Low voltage cut-off protection for lithium or nickel battery, Over-heat protection, Throttle signal loss protection, Motor blocked protection
Description
Motor Specifications:Brand: GoolRC
Item No.: S3674
KV(RPM/Volt): 2650KV
RPM: 50000
Watt: 1800W
Max current: 100A
Max voltage: <18.4V
Ressistance: 0.007
Diameter: 36mm
Length: 74mm
Shaft length: 17mm
Shaft diameter: 5mm
Connector: 4mm golden banana connector
Weight: 289g
ESC Specifications:
Brand name: GoolRC
Continous current: 120A
Burst current: 600A/10sec
Power supply: 2-4S LiPo / 4-8S NiMh
SBEC: 6.1V/3A
Power supply plug: T plug
Motor plug: 4mm banana connector
Suit for: 1/8 RC car
Cooling system: Cooling fan
Programmable: YES
Size: 50 * 40 * 35mm
Weight: 115g
Program Card Specifications:
Brand: GoolRC
Low voltage cut off: 3.1V/Cell 2.8V/Cell 3.3V/Cell No cut-off
Start modemedium, soft, strong
Max brake force: 25%, 50%, 75%, 100%
Max reverse force: 25%, 50%, 75%, 100%
Neutral range: 6%, 9%, 12%, work state
Package Information:
Package size: 10 * 8 * 6cm / 3.9 * 3.2 * 2.4in
Package weight: 454g / 16.0oz
Gift box package
Package List:
1 * GoolRC S3674 2650KV Motor
1 * GoolRC 120A ESC
1 * Program Card
9. FPVERA RCRunning RC Program Card Electronic Speed Controller Programmer for RC Car 25A - 150A ESC (Black)
Feature
This program box is used to program the brushless ESC.Suitable esc: 25A,35,45A,60A,80A,120A,150A ESC.
Used with: 1/8,1/10,1/12,1/14,1/16,1/18 rc car.
Working voltage/currren: 5-6.5V/100mAh Size: 80x60x4mm(3.15x2.36x0.16inch). SATISFACTION GUARANTEED - We are dedicated to providing our customers with the best possible shopping experience. If you have any problem,please feel free to contact us.
A wrong tooth ratio can cause the motor to overheat. The motor temperature should be lower than 212 during the operation. Temperatures above 212 will weaken the magnet and may partly melt the coils and eventually damage the ESC (because of strong current)!!! To avoid potential risks such as ESC/motor damage or malfunction caused by overheat, start with a very small pinion first and check the ESC & motor temperatures regularly throughout the run. This is the only way to prevent overheating!!!
Description
RC Program Card Electronic Speed Controller Programmer for RC Car 25A- 150A ESC by RCRunningSpecifications:
This program box is used to program the brushless ESC
Suitable esc: 25A, 35A, 45A, 60A, 80A, 120A150A ESC
Used with: 1/8,1/10,1/12,1/14,1/16,1/18 rc car
Size: 80x60x4mm(3.15x2.36x0.16inch)
1Low Voltage Cut-Off: The function is mainly to prevent the lithium battery pack from over discharging. When using lithium battery pack, please set the suitable value for low-voltage protection as your like. WARNING: Never use the default value "Non-protection" for lithium battery! 3.1V2.9V2.7VNon-Protection
default value 3.1V
23 start modes (Also called "Punch") from "soft" to "very aggressive" default value Medium
3Maximum brake force: 25A35A45A60A50%25%75%100%default value 50%80A120A25%50%75%100%default value 25%
4Maximum reverse force: 25%50%75%100%default value 25%
5Neutral range: 9%(narrow)6%(Normal)12%(Wide) default value 9%
programme card Method
1. Connect BEC wires with the program car then turn on the ESC.80A120A press the keys to be not put
2. The Green LED flashes for 2 times then LED off, that is, the connecting program car with ESC is successful, and the Red LED on presents the current value of that item. Otherwise, the connecting is failed.
3. Please press the Key "" to select different programs
4. Please press the Key "" to select different value of the current program
5. Please press the Key "Program" to confirm above selections, the Green LED on immediately and has gone out within 5 seconds, that is, this process is successful.
6. Please press the Key "Reset" to reset the factory setting.
Package Including
1 * RC Program Card
10. Ktyssp Surpass Hobby Racerstar LED Program Card for 25A 35A 45A 60A 80A 120A ESC Set
Feature
The high quality and the cheapest price,you can not find the other onehardshell storage mavic series plastic propeller release tool u-wrench blade removal wrench landing pad helipad foldable pro rc quadcopter universal smartphone replacement type to usb-a 3.0 fast professional mrc filters flexible star base accessories 1/2 wrist lanyard strap motor repair parts authentic brushless bicycle clamp gimble cam multi-function inch desk dock table spare 2pair quick-release 360 rotary bike handlebar :Environmental friendly material nontoxic odour free anti broken stable
Foldable Low Noise Propeller Accessories drone propeller guards Mini guard part balancer Folding Propellers Screw Prop Quick release phantom 4 propellers low noise dji for dji mavic pro propellers for dji mavic pro platinum phantom 3 propellers red carbon guards led dji low noise master airscrew carbon fiber phantom 4 propellers low noise dji yellow dji mavic pro fly more kit for propeller guards bag tello drone battery controller case accessories with boost combo charger platinum batteries
Helicopter Toy Remote Controls Remote Quadcopter Rc helicopter RC for aircraft Airplane Mini Cars led lights REMOTE CONTROL TOYS Metal Toys Games Gyro Camera Gifts Photography Blade Drone RC Quadcopters Battery Ufo radio control Parts Fashion Control axis Toys Hobbies Men's Fashion Game Repair Tool 4ch Servo RC Drone RC toy Hobby Bluetooth Boat Case Headphones s5 case samsung case SPIGEN Case iphone 5 case LED Flash RC toys Hobbie iphone wheel thumb ronin pad lanyard lightning low noise
handheld phone holder set mobile bracket gimbal stand for dji osmo pocket adapter plate expansion board module 6pcs explosion-proof tpu screen protector film full coverage guard camera lock lens cover hood caps tripod head mount 1/4 screw selfie stick tello drone waterproof portable bag body/battery handbag carrying case type-c usb extension extender data sync cable adaptor spark remote control strorage travel box 2pairs led flash propellers blades props rechargeable lightweight mounts stabilize
Description
Welcome to my store ,there are a lot of products with the high quality ,and the price is cheap, always have your favoriteFeatures:
100% brand new and high quality.
Low Voltage Cut-Off:The function is mainly to prevent the lithium battery pack from over discharging. When using lithium battery pack, please set the suitable value for low-voltage protection as your like.WARNING: Never use the default value "Non-protection" for lithium battery! 3.1V, 2.8V, 3.3V, Non-Protectiondefault value 3.1V
3 start modes (Also called "Punch") from "soft"to "very aggressive" default value Medium
Maximum brake force: 25A, 45A, 60A50%, 25%, 75%, 100%default value 50%,80A, 120A25%, 50%, 75%, 100%default value 25%
Maximum reverse force:25%, 50%, 75%,100%default value 25%
Neutral range: 9%(narrow),6%(Normal), 12%(Wide)default value 9%
LED Program Card Specifications:
Brand name: SURPASS HOBBY
Use: Vehicles & Remote Control Toys
For Vehicle Type: Cars
Remote Control Peripherals/Devices: LED Program Card
Only Apply to: Racerstar
Material: Composite Material
Programme card Method:
1. Connect BEC wires with the programmer then turn on the ESC.80A120A press the keys to be not put
2. The Green LED flashes for 2 times then LED off, that is, the connecting programmer with ESC is successful, and the Red LED on presents the current value of that item. Otherwise, the connecting is failed.
3. Please press the Key"" to select different programs
4. Please press the Key"" to select different value of the current program
5. Please press the Key "Program" to confirm above selections, the Green LED on immediately and has gone out within 5 seconds, that is, this process is successful.
6. Please press the Key"Reset"to reset the factory setting.
Package includes:
1XLED Program Card