Shopping interconnected photoelectric and ionization smoke detector has never been easy. You may come many of website, read interconnected photoelectric and ionization smoke detector reviews, check the price... It will really makes you headache and tired. Don't worry! I've found ways to make it less painful. Let's find in below article.
Shopping interconnected photoelectric and ionization smoke detector has never been easy. You may come many of website, read interconnected photoelectric and ionization smoke detector reviews, check the price… It will really makes you headache and tired. Don’t worry! I’ve found ways to make it less painful. Let’s find in below article.
Best interconnected photoelectric and ionization smoke detector
1. Kidde 21026043 Battery-Operated(Not Hardwired) Combination Smoke/Carbon Monoxide Alarm with Voice Warning KN-COSM-BA
Feature
Battery Safeguard with Front Load Battery Door - Quick and easy battery replacement.AA batteries required (best with Polaroid AA batteries)Smart 2-in-1 Voice Alarm - Voice announces "Fire!" or "Warning! Carbon Monoxide"
Smart Hush - Nuisance alarms are silenced by pressing the hush button.
Test/Reset Button, LEDs, and Low Battery Warning. Temperature Range: 40F (4.4C) to 100F (37.8C)
Meets Underwriters Laboratories (UL) UL2034 and UL217 compliance. Note: Refer the User Guide before use.
Description
The Kidde KN-COSM-BA battery-operated carbon monoxide and smoke alarm combines two important safety devices into a single unit.This alarm includes a voice warning system that makes four announcements: fire, carbon monoxide, low battery, or smart hush activation. The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This unit uses three AA batteries, protecting you and your family even during a power outage. This alarm uses ionization-sensing technology for the smoke alarm. Ionization-sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric-sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fire that can occur within the home.
KN-COSM-BA Battery-Operated Combination Smoke and CO Alarm at a Glance Employs both smoke and carbon monoxide sensors Stand-alone battery-operated alarm is easy to install throughout the home, as no wiring is needed Features a hush button to silence the alarm for non-emergency situations like a smoky dinner Voice alarm eliminates confusion and clearly warns of smoke/CO danger or low battery Protects from two different hazards, smoke and carbon monoxide, and has a different voice warning for each hazard.
The battery-operated KN-COSM-BA offers easy installation.
Combination Smoke/Carbon Monoxide Alarm The Kidde combination carbon monoxide and smoke alarm includes a voice warning system that eliminates confusion and clearly warns you and your family of a smoke or carbon monoxide (CO) danger, of low battery, or of hush-mode setting.
Alarm Warnings Fire:
The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message: "Fire! Fire!" The alarm will repeat the pattern until smoke is eliminated.
Carbon Monoxide:
Four short alarm beeps followed by a verbal warning: "Warning--carbon monoxide!" This continues until the unit is reset or the CO is eliminated.
Low Battery:
One chirp followed by warning: "Low battery." The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour, the red LED light will flash once every minute and will be accompanied by the chirp sound. The low-battery warning will only sound once every 15 minutes.
Voice Hush Indication:
"Hush activated" and "Hush canceled" voice announcement. Peak Level Memory: If the alarm had detected a CO level of 100ppm or higher when the test/reset button is pressed, the unit will announce, "Carbon monoxide previously detected" to warn of the CO incident. Trademarked Hush Feature for Convenience By pressing the hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This feature desensitizes the alarm for approximately 10 minutes. If the smoke is not too dense, the alarm will silence immediately, the unit will verbally announce, "Hush mode activated," and the green LED will flash every two seconds for approximately 10 minutes.
Reliable Battery Power, Indicator LED, Test Feature and Low-Battery Warning The battery-powered alarm provides continuous protection, even during power outages. Because this alarm only helps protect you if it's working, this unit features a red LED that flashes every 30 to 40 seconds to indicate that it is operating correctly.
For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn. If any form of battery failure is detected, the red LED light will flash and the unit will chirp one time, followed by the warning message, "low battery." This cycle will occur once every minute, and will continue for at least seven days. Seven years after initial power up, this unit will chirp" every 30 seconds.
This is an operational end-of-life feature that will indicate that it is time to replace the alarm. UL 2034, the independent standard applicable to CO alarms, requires CO alarms to have an end-of-life warning. This requirement went into effect in March 2007, meaning any CO alarm manufactured after April 2007 with a UL listing must have this feature. Most states that require CO alarms in residential dwellings mandate that the alarm meet the UL 2034 standard.
The unit measures just 5.75 inches in diameter and 1.7 inches deep, and it features a neutral white finish. It includes tamper-resistant features to deter vandalism or theft. This combination smoke/CO alarm is UL listed, so you can be confident of its quality, and it is backed by a ten-year limited warranty.
About Kidde:
A UTC Fire and Security Brand Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that's rich with innovations, from the patent of the Chubb detector lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.
What's in the Box:
Combination smoke and carbon monoxide alarm with mounting bracket and mounting hardware, three AA batteries, a and bilingual (English/Spanish) user's manual.
2. Kidde Smoke and Carbon Monoxide Detector Alarm with Voice Warning | Hardwired w/Battery Backup | Interconnectable | Model # KN-COSM-IBA
Feature
Smart Interconnect-Interconnects up to 24 Kidde devices (of which 18 can be initiating), Battery Backup (2-AA batteries included)-Provides protection during power outages.Front Loading Battery Door-Replace the backup batteries without disconnecting from mounting bracketHumidity range:10%-95% relative humidity, non-condensing.Battery Lockout System-The battery door will not close unless the batteries are properly installed, Alarm Tamper Resist-Helps deter from tampering and theft, Adjustable Mounting Bracket-Makes installation fast and easy. Works with existing smoke and combination smoke and CO mounting brackets.
Peak Level Memory-Announces "CARBON MONOXIDE PREVIOUSLY DETECTED" if alarm has detected a CO level of 100ppm or higher since it was last reset, HushTM Feature-Silences nuisance alarms for approximately 9 minutes. (Smoke must be present before HushTM is activated)
Ionization Sensor Technology-Ideal for detecting fast flaming and other types of fires, est Button Functions:- Tests the unit for proper operation - Peak Level memory - Resets the Carbon Monoxide alarm
Green LED-Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSHTM mode
Red LED-When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds
Talking alarm announces the hazard type detected, helping to speed up reaction time
Combined carbon monoxide and smoke alarm, a single unit can be installed where previously two were needed
Battery safeguard ensures the unit cannot be accidentally mounted without batteries
Test-reset button tests alarm circuitry and triggers the voice announcement
Meets safety standards set by Underwriters Laboratories (UL) and interconnects with other KN-COSM-IBA models
120V AC, All Kidde brand hard wired smoke alarms are interconnectable with the KN-COSM-IBA
Description
This combination smoke/CO alarm features an 85dB horn and voice that announces "Fire", "Carbon Monoxide", and "Low Battery" warnings when detected. It can also interface with other Kidde interconnectable alarms. Meets NFPA 72 standards Smoke and Carbon Monoxide Alarm, Detection Method Ionization, Electrochemical, Up to 24 Units Interconnection Capability, Power Source 120VAC, 9V, Audible Alert 85dB @ 10 ft., Horn, Visual Alert Red LED, Diameter 5-3/4 In., Height 1-3/4 In., Digital Readout No, Battery Backup Yes, Features Voice Warning, Peak Level Memory, Reset Button, Hush Button Yes, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Standards UL, Includes Mounting Anchors and Screws3. Kidde 21026044 Wireless Interconnect Battery Operated Smoke Detector Alarm |
Feature
Wireless technology uses radio frequency to transmit and receive messagesBattery power enables homeowners to install interconnected alarms without rewiring
Smart touch button quickly and temporarily silences nuisance alarms
Wireless alarm can be installed in a detached workshop or shed
Kidde wireless smoke alarms meet UL requirements. Interconnects Up to 24 devices ( of which 18 can be initiating). With 18 initiating devices (smoke, heat, CO, etc.) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules
Description
Kidde RF-SM-DC Wireless Interconnect Battery-Operated Smoke Alarm4. First Alert Smoke Detector Alarm | Hardwired with Backup Battery, 6-Pack, BRK9120b
Feature
6 Pack for Contractors. Emits T3 PatternIonization Smoke Sensing Technology. Loud 85dB alarm
Latching Alarm Indication and Dust Cover. Tamper resistant locking pins
Easy to Install Side Battery Drawer with Universal Mounting Bracket
Tested to the highest industry standards, meets UL safety standards
Description
Smoke alarm with test/silence button and insect screened, dual ionization sensing chamber. Input: 120 volt AC - 60 Hz, green LED power-on indicator, red LED to confirm unit is working properly, single test/silence button to check all alarm functions. Solid state piezo horn rated at 85 dB minimum at 10 feet, plug in connector capable of interconnection of up to 18 alarms, 12 of which can be smoke alarms. Meets the requirements of UL 217, CSFM, NFPA, NFPA 101, ICBO, BOCA, SBCCI and CABO. 10 year limited warranty.5. First Alert Dual-Sensor Smoke and Fire Alarm, Battery Powered, Frustration-Free Packaging, SA320CN
Feature
AA batteries required (best with Polaroid AA batteries)Two sensors detect smoke from both smoldering and flaming fires. Engineered to reduce false alarms from cooking smoke or steam
Loud 85-decibel alarm is designed to be heard easily and mute button, mutes unnecessary alarms immediately. Also tests alarm function with same button
Single test/silence button for simple operation
Battery-powered fire detector installs easily with no wiring required
Description
The First Alert SA320CN Dual-Sensor Smoke and Fire Alarm is an advanced smoke detector that uses ionization and photoelectric sensors to provide early warning of both smoldering and flaming fires. It also features intelligent sensing technology to reduce false alarms from household triggers like cooking smoke or shower steam. The battery-powered fire detector installs quickly and easily, with no wiring or electrician required. A loud 85-decibel siren is designed to alert even the soundest of sleepers, and a single button silences and tests the fire detector.6. Kidde i4618 Firex Hardwire Ionization Smoke Detector with Battery Backup (6 Pack)
Feature
Red LED flashes until reset for quick, clear identification of initiating smoke alarm in interconnected systemVisible low battery indicator helps locate chirping unit
Front loading battery door makes battery changing simple, power link tab makes installation faster
False alarm control quiets unwanted alarms for up to 8 minutes
Interconnects with other compatible Firex smoke alarms and heat alarms
Description
The Firex i4618 Hardwire Smoke Alarm by Kidde is an ionization smoke alarm that operates on a 120V power source with 9V battery backup. The Firex i4618 smoke alarm offers many benefits for installers and homeowners, such as its easy-access slide load front battery door. This alarm is powered by your home's electricity and will interconnect with other smoke alarms in your home. Experts recommend interconnected alarms, because when one sounds, they all sound, providing an early warning against fire by dramatically increasing your ability to hear an alarm anywhere in your home, regardless of where the fire starts. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home The 120 volt Firex 4618 Pro Basic smoke detector has an ionization Sensor, quick connect power harness, is multi-station interconnectable, has a 5 year warranty, and is not available to members in Iowa, Oregon Or Vermont.7. Kidde RF-SM-DC Smoke Alarm
Feature
Enables quick and easy installation of an interconnected smoke alarm system without messy wiring or laborWhen one alarm sounds, they all do: wireless technology uses radio frequency to both transmit and receive messages about a hazard in the home
Battery power enables homeowners to install interconnected alarms without rewiring
Smart touch button quickly and temporarily silences nuisance alarms
Wireless alarm can be installed in a detached workshop or shed
Description
Battery Operated Wireless Smoke Alarm, Quickly & Easily Install An Interconnected Alarm System, Includes Ionization Sensor, Not Available To Members In Oregon. This product adds a great value. Product is highly durable and very easy to use. This product is manufactured in China.8. Kidde i12040 Hardwired Smoke Alarm with Battery Backup and Smart Hush
Feature
Hush feature temporarily silences nuisance alarmsOne touch test button tests unit's electronic circuitry
9V Battery Backup (included).
Tamper resist locking pin helps deter alarm tampering and theft
Kidde smoke alarms meet the UL requirements
Description
This smoke alarm responds well to fast-raging fires. It emits an 85dB horn and red LED. It also features a test/reset button to test alarm circuitry, alarm activation, and battery function. It can also interface with other Kidde interconnectable alarms. Meets UL, NFPA, FHA, HUD, CSFM standards Smoke Alarm, Detection Method Ionization, Up to 24 Units Interconnection Capability, Power Source 120VAC, 9V, Audible Alert 85dB @ 10 ft., Horn, Visual Alert Red LED, Diameter 5-1/2 In., Height 1-1/2 In., Width -, Digital Readout No, Battery Backup Yes, Features Alarm Memory, Hush Button Yes, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Standards UL, Includes 9V Battery, Manufacturers Warranty Length 5 Year Limited9. Alert Pro 10 Year Battery Smoke Detector Fire Alarm Photoelectric Sensor
Feature
Battery-powered 10 year smoke and fire alarm detector, no wire neededEnvironment friendly, without smell, radiation or harm
Low power consumption, service life sensor about 10 years
Sealed-In 10-year lithium battery
100% Satisfaction guarantee...or your money back
Description
10-YEAR BATTERY SMOKE DETECTOR ALARM : A sealed CR123A lithium battery boasts high capacity, great stability, and a long lifespan up to 10 years, avoiding the hassle of frequently changing battery SUPERIOR ALARM PERFORMANCE: Proven performance for detecting smoke from hidden and slow-burning fires; photoelectric sensor can also detect dangerous fast-burning fires that can cause extreme damages; powerful 85 dB alarm tone will sound through your entire home and instantly alert those in danger UNIQUE FUNCTIONS: Malfunction warning, low battery warning, and hush mode enabled; allows you to instantly be aware of the detector's working status; test and silence enabled by momentarily pressing Test/Silence buttan QUICK INSTALLATION: Screws and anchor plugs included for easy installation in minutes; compatible with for direct mounting to any interior ceiling; tamper-resistant pins prevent tampering and theft WIDE APPLICATIONS: Red LED flashes slowly once every 56 seconds to indicate standby mode; premium safety device for homes, offices, hotels, warehouses and other public places 1 YEAR MANUFACTURER WARRANTY10. Firex AC Hardwired Combination Carbon Monoxide & Photoelectric Smoke Alarm KN-COPE-IC
Feature
Provides protection from fire and carbon monoxide in one unit with Photoelectric sensor.Fire Warning - The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message "FIRE! FIRE!". The alarm will repeat pattern until unit is reset or smoke is eliminated.
Carbon Monoxide Warning - Four short alarm beeps followed by a verbal warning "WARNING! CARBON MONOXIDE!" This continues until the unit is reset or the CO is eliminated.
Low Battery Warning - One chirp followed by warning "LOW BATTERY". The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour the red LED light will flash once every minute accompanied by the chirp sound. The "LOW BATTERY" warning will only sound once every fifteen minutes. Voice Hush Indication: "HUSH ACTIVATED" and "HUSH CANCELLED" voice announcement
Alarm Memory - The green LED will blink once every 16 seconds to alert a user when the unit has alarmed for smoke or has detected a concentration of CO. If the alarm has detected a CO level of 100ppm or greater, when the Test/Reset button is pressed the unit will announce "CO PREVIOUSLY DETECTED". If the alarm has detected abnormal levels of smoke since its last test, it will produce three rapid beeps.
AC-Wire with battery backup, An included 9V battery protects during short-term power outages
Front-loading battery with unique battery door design
Voice Warning with Green and Red LEDs
Photoelectric smoke sensor - May detect visible fire particles associated with slow smoldering fires sooner than an ionization sensor.
Tamper resistant