If you looking for electric hydraulic pump 10000 psi then you are right place. We are searching for the best electric hydraulic pump 10000 psi on the market and analyze these products to provide you the best choice.
Best electric hydraulic pump 10000 psi
1. Happybuy Hydraulic Pump Electric Single Acting Manual Valve Hydraulic Pump 10000 PSI Electric Hydraulic Power Unit for Home and Commercial Using (Single Acting)
Feature
Electric hydraulic pump input voltage: 110V.Motor power: 0.75KW.Function: Single-acting, manual valveHydraulic pump working pressure: 63MPA.Rotate speed:1400r/min.Oil capacity: 8L
This electric oil pump is composed of three-phase asynchronous motor, high-pressure oil pump and fuel tank
The pump is equipped with pressure gauge so as to observe the pressure when the pump is working at any time
High and low speed for quick oil output.Turbine oil absorption to ensure max. effective oil volume.Overpressure unit of pressure safety valve to avoid over pressure damage or extremely pressured
Description
Electric Hydraulic Pump 10000 PSI Single Acting Manual Valve Single Acting Electric Hydraulic Pump Electric Driven Hydraulic Pump with Solenoid Valve
This electric hydraulic pump is composed of three-phase asynchronous motor, high-pressure oil pump and fuel tank. It has the advantages of small size, high pressure, light weight, simple structure and easy to use. The pump is equipped with pressure gauge so as to observe the pressure when the pump is working at any time. so that users can observe the work of changes at any time
Item Specifications
Function: Single-acting, manual valve
Input voltage: 110V 60HZ
Motor power: 0.75KW
Electric current:3.5A
Working pressure: 63MPA
High pressure:70Mpa(10000PSI)
Low pressure:2Mpa(300PSI)
Oil capacity: 8L
Rotate speed:1400r/min
Operation method:
When using, you should open the import and export of hand wheel, plug in the power supply, and connect the quick joint of pump to the quick joint of the equipped hydraulic tool. Press the power switch to turn on the power, after the motor rotates for 1-2 minutes, you should close the oil hand wheel, and place the pump in the supercharged state. At this time, with the increase of the load the output hydraulic oil is of self pressurization to carry out the work until 63MPA. After the work is finished, you should open the oil hand wheel. When the hydraulic oil is over, remove the quick joint cover, turn on the air release nut, and turn off the power supply.
Package Content
Electric Driven Hydraulic Pump x 1
Oil Hose x 1
2. Electric Hydraulic Pump 10000 PSI Electric Driven Hydraulic Pump Pedal Solenoid Valve Control 750W 110V (Single Acting)
Feature
1.The pump can be used for a variety of hydraulic equipments.2.If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening,cutting, assembly and disassembly. Reduce manual work and maximize work efficiency.
3.Punching machine, bending machine, Jack split hydraulic products
4.Working modePedal Solenoid valve Control
5.This hydraulic pump is equipped with other hydraulic tools can carry out lifting, pressure type, elbow, bending row, straightening, cutting, assembly, demolition and many other work. Reduce labor intensity, improve work efficiency.
Description
Specifications:Input voltage: AC 110V 60HZ
Flow rate: 0.6L/min(7Mpa) - 5L/min(7Mpa)
Working pressure: 290PSI - 10152PSI(2Mpa - 70Mpa)
Oil capacity: 7L
Motor power: 750W
Motor speed: 1400r/Min
Machine size: 360X280X440mm(14.2"x11"x17.3")
N.W.: 28KG
Operation Instruction:
1. Open the filler before use, the electric pump and power connections before oiling, then press down the black button which next to the motor to open, press the manual operation switch (up), after a few air pressure, press the manual operation switch (down), turn off the motor, connected to tubing. (The pressure should not exceed 63Mpa when air pressure, in order to avoid damage)
2. Open the motor after the pump connect with the equipment, and placed the operation valve in pressurized position after the motor rotates 1-2 minutes, this moment the hydraulic oil come into the cylinder to perform the work, and the output of the hydraulic oil will increases with the load on their own booster until 63Mpa.
3. The oil pump regular working temperature between 10~50,when find the oil temperature70 should stop using after continuous working under high pressure, let it self-cooling before use.
4. The pressure of the relief valve and safety valve have been set before the pump leave the factory, the user can not arbitrarily increase the pressure,could only reduce it according to the actual working pressure, that can improve the life of the pump station.
5. The motor must have reliable grounding.
Package included:
1 X Electric Driven Hydraulic Pump
1 X Oil Hose(1.8M)
1 X Quick Connector
3. OTC 4044 RamRunner Two-Stage Electric/Hydraulic Pump - 2 Position/2 Way, Manual Valve
Feature
Run large single or double acting rams for fast frame straightening wheel alignmentDeliver up to 45 cubic inch minimum at maximum operating pressure of 10000 PSI
2-position/2-way valve with advance and return positions and is for use with single-acting rams
1/2 hp single phase 60 Hz 115 volt thermal protected electric motor
6 foot remote control cord for on/off control
Description
The OTC 4044 runs large single-acting rams for fast frame straightening, wheel alignment, etc. It delivers up to 45 cu. in./min. at a maximum operating pressure of 10,000 PSI. It has a 2-position/2-way valve with advance and return positions and is for use with single-acting rams. Equipped with a 1/2 h.p. single-phase, 60 Hz, 115 volt thermal protected electric motor and is designed to start under load. It also features a 6 remote control cord for on/off control, and comes supplied with one gallon and two quarts of oil.4. Electric Hydraulic Pump Single Acting Remote Controlled Valve 10000 PSI B-700T
Feature
Max pressure: 10000 psiOil capacity 0.53 gallon
Single-acting, solenoid valve operation
Oil output at low pressure (in/min): 427
Oil output at high pressure (in/min): 49
Description
Single acting electric driven hydraulic pump with a remote solenoid valve. Capable of 10000psi with an oil capacity of 0.53 gallon. Motor is 1.2kW, 120v5. Electric Driven Hydraulic Pump,10000 PSI Single Acting Manual Valve 750W 110V Shipping from USA
Feature
Electric hydraulic pump input voltage: 110V.Motor power: 0.75KW.Function: Single-acting, manual valveHydraulic pump working pressure: 63MPA.Rotate speed:1400r/min.Oil capacity: 7L
This electric oil pump is composed of three-phase asynchronous motor, high-pressure oil pump and fuel tank
Working mode: Manual valve controls the return oil
Quick oil output.Turbine oil absorption to ensure max. effective oil volume.Overpressure unit of pressure safety valve to avoid over pressure damage or extremely pressured
Description
Specifications:Input voltage: AC 110V 60HZ
Flow rate: 0.6L/min(7Mpa) - 5L/min(7Mpa)
Working pressure: 290PSI - 10152PSI(2Mpa - 70Mpa)
Oil capacity: 7L
Motor power: 750W
Motor speed: 1400r/Min
Machine size: 360X280X440mm(14.2"x11"x17.3")
N.W.: 26kg
Operation Instruction
1. Open the filler before use, the electric pump and power connections before oiling, then press down the black button which next to the motor to open, press the manual operation switch (up), after a few air pressure, press the manual operation switch (down), turn off the motor, connected to tubing. (The pressure should not exceed 63Mpa when air pressure, in order to avoid damage)
2. Open the motor after the pump connect with the equipment, and placed the operation valve in pressurized position after the motor rotates 1-2 minutes, this moment the hydraulic oil come into the cylinder to perform the work, and the output of the hydraulic oil will increases with the load on their own booster until 63Mpa.
3. The oil pump regular working temperature between 10~50,when find the oil temperature70 should stop using after continuous working under high pressure, let it self-cooling before use.
4. The pressure of the relief valve and safety valve have been set before the pump leave the factory, the user can not arbitrarily increase the pressure,could only reduce it according to the actual working pressure, that can improve the life of the pump station.
5. The motor must have reliable grounding.
Package included:
1 X Electric Driven Hydraulic Pump
1 X Oil Hose(1.8M)
1 X Quick Connector
6. OTC 2510A Stinger Air/Hydraulic Pump
Feature
Ideal all-around power source develops 10,000 PSI at 100 PSI airTwo-stage release mechanism
Internal relief valve
3/8 inch NPTF oil port
Description
The OTC Stinger air/hydraulic pump are an ideal all-around power source that develops 10,000 PSI at 100 PSI air. Product features a two-stage release mechanism, internal relief valve as well as a 3/8 inch NPTF oil port and 98 cubic inches of usable oil.7. Electric Hydraulic Pump 10000 PSI Oil Pressure Pedal with Solenoid Valve 750W 110V for Home and Commercial Using
Feature
Working modePedal Solenoid valve ControlHydraulic Pump Working pressure: 290PSI - 10152PSI(2Mpa - 70Mpa) ; Flow rate: 0.6L/min(7Mpa) - 5L/min(7Mpa); Motor power: 750W
The pump can be used for a variety of hydraulic equipments.
If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency.
Punching machine, bending machine, Jack split hydraulic products.
Description
Specifications:
Input voltage: AC 110V 60HZ
Flow rate: 0.6L/min(7Mpa) - 5L/min(7Mpa)
Working pressure: 290PSI - 10152PSI(2Mpa - 70Mpa)
Oil capacity: 7L
Motor power: 750W
Motor speed: 1400r/Min
Machine size: 360X280X440mm(14.2"x11"x17.3")
N.W.: 28KG
Operation Instruction
1. Open the filler before use, the electric pump and power connections before oiling, then press down the black button which next to the motor to open, press the manual operation switch (up), after a few air pressure, press the manual operation switch (down), turn off the motor, connected to tubing. (The pressure should not exceed 63Mpa when air pressure, in order to avoid damage)
2. Open the motor after the pump connect with the equipment, and placed the operation valve in pressurized position after the motor rotates 1-2 minutes, this moment the hydraulic oil come into the cylinder to perform the work, and the output of the hydraulic oil will increases with the load on their own booster until 63Mpa.
3. The oil pump regular working temperature between 10~50,when find the oil temperature70 should stop using after continuous working under high pressure, let it self-cooling before use.
4. The pressure of the relief valve and safety valve have been set before the pump leave the factory, the user can not arbitrarily increase the pressure,could only reduce it according to the actual working pressure, that can improve the life of the pump station.
5. The motor must have reliable grounding.
Package included:
1 X Electric Driven Hydraulic Pump
1 X Oil Hose(1.8M)
1 X Quick Connector
8. Electric Hydraulic Pump Double Acting Manual Valve Power Pack 10000 PSI B-630B
Feature
Max pressure: 10000 psiOil capacity 2 gallons
Double-acting, manual valve operation
Oil output at low pressure (in/min): 305
Oil output at high pressure (in/min): 43
Description
Double acting electric driven hydraulic pump with a manual valve. Capable of 10000psi with an oil capacity of 2 gallons. Motor is .75kW, 120v9. Electric Hydraulic Pump Single Acting Manual Valve Power Pack 10000 PSI B-630C
Feature
Max pressure: 10000 psiOil capacity 2 gallons
Single-acting, manual valve operation
Oil output at low pressure (in/min): 305
Oil output at high pressure (in/min): 43
Description
HYDRAFORE B-630C Electric hydraulic pump Features introduction: Maximum working pressure: 700bar Two-stage hydraulic design Medium fuel tank, standard electric hydraulic pump Characteristic: Steel structure, sturdy and durable. Light weight, handle design, easy to move. The 8L large capacity fuel tank can handle most hydraulic tools. Two-stage hydraulic design for increased productivity. Manual control valve, single circuit design; Built-in safety valve for overload protection. Configure the pressure gauge. Configure 1.5m high pressure tubing and R2 3/8 quick connector and dust cap. Single acting electric driven hydraulic pump with a manual valve. Capable of 10000psi with an oil capacity of 2 gallons. Motor is .75kW, 120v10. Mophorn Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Hydraulic Foot Pump Air Treadle Foot Actuated Hydraulic Pump for Auto Body Frame Machines and Pulling Post (10000 PSI 0.22 Gal Reservoir Orange)
Feature
3 Pedal Functions-Apply pressure, hold pressure, release pressure.Wide Application-Suitable for all 10 ton rams, frame and body work, Use able oil 98 cubic inches.
Overload Pump Saver- Built in safety overload pump saver with 3/8 NPT oil output.
Real Metal Wire-Real metal wire not the nylon thermos plastic.
Pro Grade Quick Disconnect-10,000 PSI pro grade quick disconnect coupling, 6 foot 10,000 PSI "JACK HOSE" with 20K bursting capacity.
Description
The air foot pedal hydraulic pump with 10,000 PSI output is our best selling item. 10,000 PSI pro grade quick disconnect coupling, and a 6 foot 10,000 PSI"JACK HOSE"with 20K bursting capacity full 3/8 inside dimension for high flow rate and real metal wire not the nylon thermos plastic.Widely Applicable
Use able oil 98 cubic inches, suitable for all 10 ton rams, frame and body work.
Built In Safety
3/8 NPT oil output, safely builds to 10,000 pounds and has a built in safety overload pump saver.
Standard 3/8 NPT
All threads on all components in set are standard 3/8 NPT.
Multiple Functions
Apply pressure, hold pressure, release pressure.
Release Easily
Can release and remove foot as release / return takes effect by release lock plate.
Long Lasting Seal
Designed to absorb the high pressure from pump with a Teflon back up for long lasting seal performance.
Condition: New
Air inlet: npt
Oil output: 3/8 npt
Oil flow / delivery: 7.6 inches per minute (w/load) 49.5 inches per minute (w/o load)
Reservoir capacity: gallon
Functions: 3 pedal
Net weight: 14 pounds (With oil)
Package:
1 x Air Foot Pedal Hydraulic Pump