It's hard to know which is good knife making supplies mosaic pins. There are alot of knife making supplies mosaic pins reviews on internet. In this article we suggest top 10 the best knife making supplies mosaic pins for you. Please read carefully and choose what is the best knife making supplies mosaic pins for you.
It’s hard to know which is good knife making supplies mosaic pins. There are alot of knife making supplies mosaic pins reviews on internet. In this article we suggest top 10 the best knife making supplies mosaic pins for you. Please read carefully and choose what is the best knife making supplies mosaic pins for you.
Best knife making supplies mosaic pins
1. 360 Brass Knife Pin Stock 3/16" x 6 inch 2pcs.
Description
360 Brass Knife Pin Stock 3/16" x 6 inch 2pcs. Designed for use in making knives.2. Mosaic Pin Pins Knife Handle Custom Knives Blank Blades Brass Copper Steel for Hunting Knives (3/16") (#25 (3/16"))
Feature
Our mosaic pins are hand-crafted by a veteran knife-maker in the USA.Diameter: 3/16", Length: 5.8 inches approximately. You get 1 piece of mosaic pin stock with each order. For knife handles.
If your knife handle is 0.75"-0.9" thick, this mosaic piece will make 6 pins when cut (good for several knives). If your knife handle is 0.95"-1.15" thick, this mosaic piece will make 5 pins when cut (good for several knives). If your knife handle is 1.2"-1.4" thick, this mosaic piece will make 4 pins when cut (good for several knives).
Our mosaic pins have been vacuum-pumped to remove air bubbles. The resin is pulled in with a high-end vacuum, which pulls the glue down, and removes any small bubbles. The pins are cured afterward and lastly polished and burrs removed.
You wont get any "rattlers" with our high quality mosaic pins (a "rattler" is where you have loose pieces inside the mosaic pin due to inadequate vacuum pumping out of air bubbles prior to the curing stage).
Description
Our mosaic pins are hand-crafted by a veteran knife-maker in the USA.As a note: It is possible to drill a knife blank's pin holes larger (or create your own pin hole locations). You simply need to use drill bits intended for drilling metal, which are capable of drilling through hardened high carbon steel. This method is recommended because you be able will get the exact fit you are looking for when using our mosaic pins.
You will receive one piece of mosaic pin stock. Each piece comes in approximately 5.8" length.
We use only the highest quality brass, copper and steel.
If your knife handle is 0.75"-0.9" thick, this mosaic piece will make 6 pins when cut, good for several knives.
If your knife handle is 0.95"-1.15" thick, this mosaic piece will make 5 pins when cut, good for several knives.
If your knife handle is 1.2"-1.4" thick, this mosaic piece will make 4 pins when cut, good for several knives.
Our mosaic pins have been vacuum-pumped to remove air bubbles. The resin is pulled in with a high-end vacuum, which pulls the glue down, and removes any small bubbles. The pins are cured afterward and lastly polished and burrs removed.
The center of the mosaic pin is filled with clear epoxy resin. The filling will appear dark when initially received, however light will be able to shine through when you are done cutting this down to small pieces for your knife handle. The transparency will become evident with the smaller length pieces.
You wont get any "rattlers" with our high quality mosaic pins (a "rattler" is where you have loose pieces inside the mosaic pin).
A penny is shown for a size comparison. Penny not included.
3. Mosaic - USA KMS Mosaic Pin for Knife Handle 1/4" x 5" Brass #108-5 - BLACK EPOXY
Feature
Style 108-51/4" diameter x 5" long
Brass Tubes and Rods with Black Epoxy
Handmade in house in the USA
Use these mosaic pin/lanyard tubes in your knife handles to give some extra detail.
Description
Tip: These get hot very quickly when being worked and the epoxy will soften or worse break down. This is just the nature of mosaic tubing. Keep them cool when you getting them to length or working them in your handle. Cut or grind them with fresh blade or belt. Dip frequently if you need to.4. Mosaic Pin 1cm Knife Making Jewelry Handle Scales Grips Knives (#108 Elk-Brass)
Feature
NOTICE: Read the "Important Instructions" section below.Diameter: 1cm (approximately 25/64 inches)
Length: 10cm (4 inches)
This pin is made from brass.
Description
It can be used as a solid pin or sliced into thin pieces for inlays. The pattern exists along the entire pin length.
Important Instructions:
- This pin requires a hole of 1cm to be drilled into the handle of your knife. You simply need to use drill bits intended for drilling metal, which are capable of drilling through the steel type of your blade (i.e. hardened 1095 high carbon steel, D-2, stainless, etc).
- Do not expose to excessive heat when cutting the pins (it will become damaged over 95 degrees celsius). Do not polish them too much.
- Use only sandpaper for polishing. Use 1200 grit sandpaper for final polishing.
- And last, use lacquer or oil.
- Outside Diameter: 1cm (equal to 10mm) (approximately 25/64 inches)
- Length: 10cm (4 inches)
- The center of the mosaic pin is filled with epoxy resin.
5. Whole Earth Supply Inc. 8mm Mosaic Pin Knife Making Jewelry Handle Scales Grips Knives (#217 Skull)
Feature
NOTICE: Read the "Important Instructions" section below.Diameter: 8mm (approximately 5/16 inches)
Length: 10cm (4 inches)
Description
It can be used as a solid pin or sliced into thin pieces for inlays. The pattern exists along the entire pin length.
Important Instructions:
- This pin requires a hole of 8mm to be drilled into the handle of your knife. You simply need to use drill bits intended for drilling metal, which are capable of drilling through the steel type of your blade (i.e. hardened 1095 high carbon steel, D-2, stainless, etc).
- Use 1200 grit sandpaper for final polishing.
- And last, use lacquer or oil.
- Outside Diameter: 8mm (approximately 5/16 inches)
- Length: 10cm (4 inches)
- The center of the mosaic pin is filled with epoxy resin.
6. Mosaic Pin Pins Knife Handle Custom Knives Blank Blades Brass Copper Steel for Hunting Knives (1/4") (#60 (1/4"))
Feature
Our mosaic pins are hand-crafted by a veteran knife-maker in the USA.Diameter: 1/4", Length: 5.8 inches approximately. You get 1 piece of mosaic pin stock with each order. For knife handles.
If your knife handle is 0.75"-0.9" thick, this mosaic piece will make 6 pins when cut (good for several knives). If your knife handle is 0.95"-1.15" thick, this mosaic piece will make 5 pins when cut (good for several knives). If your knife handle is 1.2"-1.4" thick, this mosaic piece will make 4 pins when cut (good for several knives).
Our mosaic pins have been vacuum-pumped to remove air bubbles. The resin is pulled in with a high-end vacuum, which pulls the glue down, and removes any small bubbles. The pins are cured afterward and lastly polished and burrs removed.
You wont get any "rattlers" with our high quality mosaic pins (a "rattler" is where you have loose pieces inside the mosaic pin due to inadequate vacuum pumping out of air bubbles prior to the curing stage).
Description
Our mosaic pins are hand-crafted by a veteran knife-maker in the USA.As a note: It is possible to drill a knife blank's pin holes larger (or create your own pin hole locations). You simply need to use drill bits intended for drilling metal, which are capable of drilling through hardened high carbon steel. This method is recommended because you be able will get the exact fit you are looking for when using our mosaic pins.
You will receive one piece of mosaic pin stock. Each piece comes in approximately 5.8" length.
We use only the highest quality brass, copper and steel.
If your knife handle is 0.75"-0.9" thick, this mosaic piece will make 6 pins when cut, good for several knives.
If your knife handle is 0.95"-1.15" thick, this mosaic piece will make 5 pins when cut, good for several knives.
If your knife handle is 1.2"-1.4" thick, this mosaic piece will make 4 pins when cut, good for several knives.
Our mosaic pins have been vacuum-pumped to remove air bubbles. The resin is pulled in with a high-end vacuum, which pulls the glue down, and removes any small bubbles. The pins are cured afterward and lastly polished and burrs removed.
The center of the mosaic pin is filled with clear epoxy resin. The filling will appear dark when initially received, however light will be able to shine through when you are done cutting this down to small pieces for your knife handle. The transparency will become evident with the smaller length pieces.
You wont get any "rattlers" with our high quality mosaic pins (a "rattler" is where you have loose pieces inside the mosaic pin).
A penny is shown for a size comparison. Penny not included.
7. Mosaic - USA KMS Mosaic Pin for Knife Handle 3/16" x 5" Stainless #312-1
Feature
Style #312-13/16" diameter x 5" length
Stainless tube with brass rods and black epoxy
Handmade in house in the USA
Use these mosaic pin/lanyard tubes in your knife handles to give some extra detail.
Description
Tip: These get hot very quickly when being worked and the epoxy will soften or worse break down. This is just the nature of mosaic tubing. Keep them cool when you getting them to length or working them in your handle. Cut or grind them with fresh blade or belt. Dip frequently if you need to.8. Living house For Cutlery Rivets 5/16" x 5/8" Knife Making Handle Pins Brass 12 sets
Feature
Brass Cutlery Compression RivetsEasy to install compression type rivets. Push together at least 1/8" for a permanent bond.
Head size 5/16" - Length 5/8".
9. Hand Forged Damascus Steel Blank Blade 11.00" Knife Making Supplies by CANUSA | AB17
Feature
DIMENSIONS: Total Length: 11.00" (approx.) | Blade Length: 6.00" (approx.) | Handle length: 5.00" (approx.) | Thickness: 4 to 5mmVERY DISTINCTIVLY HAND FORGED WITH SPECIAL TECHNIQUES: All our blades and knives are 100% hand-forged with 260+ layers of 1095 and 15N20 steels and have hardness around 56-58 HRC. You will find our Damascus steel blades and knives VERY DISTINCTIVE as we are utilizing some SPECIAL TECHNIQUES during forging. Just give it a try.
EASY TO MAKE A KNIFE: Select a blank blade from our wide range of designs and make a unique and awesome knife from basic hand tools (No need to buy expensive tools). BRAND: BlankBlades (Buy at highly discounted rates exclusively here on our Amazon store).
PURE COWHIDE LEATHER SHEATH: We provide pure and genuine cowhide leather sheaths with our knives (not with blank blades).
ART COLLECTION / EXCELLENT GIFT IDEA: Our Damascus steel blades and knives are VERY DISTINCTIVLY HAND FORGED WITH SPECIAL TECHNIQUES. No matter if you are fond of knives or antiques in general, you should definitely include our products to your collection! Or surprise your friends, family members by giving them this unique gift.
Description
GENUINE DAMASCUS STEEL:Our Damascus steel is genuine layered (not fake or imitation Damascus). It's etched to show layers. The blade is fully hardened and the handle is semi-hardened so you can work on the handle e.g. making a new hole or widen an already existed hole. BRAND:
BlankBlades (Buy at highly discounted rates exclusively here on our Amazon store). SHARPNESS:
Our blades/knives are very sharp however you can further sharpen them according to your own desired level. FEEDBACK:
If you are not happy with our items please contact us before leaving any negative or natural feedback we will try to resolve issue as quickly as possible because we aim to give our customers 100% satisfaction. RETURN POLICY:
If you want to exchange or you change your mind, just return it and we will give you 100% money back. KNIFE HANDLE MATERIALS:
Our knives are hand made from 100% real Buffalo Horn, Stag Horn, Ram Horn, Camel Bone, Micarta, Resin, Dollar Woods or Exotic Woods. We also sell Handle Materials, Mosaic Pins and Brass Pins for Blank blades (please see our Amazon Store). NOTES:
Please note that this product has oil on it to maintain the quality control and to avoid rust during stocking in the warehouse so please clean it with warm water and dish washer liquid before use. This is our stock photo and actual blade/knife may vary slightly. Pin hole sizes may vary and we are not able to determine the size of the holes of the exact product you will receive since it will be shipped by Amazon. We do not sell our products (hunting knife, blade etc.) to anyone under the age of 18. KNIFE CARING TIPS:
Never store your knife in a leather sheath for long time. Leather will absorb water and will rust your knife. Always clean the blade after each use and oil/wax it. Click "Add to Cart" button NOW while supplies last!
10. 10 sets/lot DIY Knife handle screw Flat-head plum blossom screw,Tactical survival knife screw stainless steel EDC knife shaft screws
Feature
Material:stainless steelTactical survival knife screw,EDC knife shaft screws
Suit for T8 plum blossom Screwdriver
Package Quantity:10 sets (Screw and Stud)
Size: Head diameter :8mm(0.32",) Shaft Diameter:5mm(0.2")Screw length:14mm(0.55") Total length:17.5mm(6.89")