If you looking for carriage bolts galvanized 3/8 then you are right place. We are searching for the best carriage bolts galvanized 3/8 on the market and analyze these products to provide you the best choice.
If you looking for carriage bolts galvanized 3/8 then you are right place. We are searching for the best carriage bolts galvanized 3/8 on the market and analyze these products to provide you the best choice.
Best carriage bolts galvanized 3/8
1. Hillman 812584 Hot Dipped Galvanized Carriage Bolt, 3/8 x 3-1/2-Inch, Silver, 50-Pack
Feature
Carriage Bolts are designed to fasten a wooden face to either wood or metalFlat head provides a semi-flush finish to applications
The heads is designed to eliminate the need for a washer
Square underside of the head is self locking to eliminate the need for a driving tool
Galvanized finish is perfect for rust prevention
Description
Carriage Bolts are designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is self locking to eliminate spinning and the need for a driving tool. The galvanized finish provides optimal rust prevention but can be chalky in appearance.2. Hillman 812632 Hot Dipped Galvanized Carriage Bolt, 1/2 X 8-Inch, 25-Pack
Feature
Carriage bolts have a domed head that is not designed to be drivenThe flat-styled head allows for a smooth exterior finish
Hot Dipped Galavanized
Description
Carriage Bolts have a smooth, rounded head that has a small square section underneath. They are used in wood connections utilizing the square neck under the round head which will sit into the hole to prevent the head from turning. These carriage bolts come plated in zinc for moderate corrosion resistance.3. CARRIAGE BOLTS 3/8-16 x 3-1/2": w/ NUTS Galvanized Bulk Carriage Bolt ~ Coarse Thread (3 1/2 inches long) (100 pieces) - Chain Link Fence Carriage Bolt w/Nuts
Feature
CARRIAGE BOLTS 3/8-16 x 3-1/2": w/ NUTS Galvanized Bulk Carriage Bolt ~ Coarse Thread (3 1/2 in)The tread pitch on these bolts is 16 (3/8-16) an everyday use 3/8" coarse thread carriage bolt.
General use application. These ones are a gray looking Galvanized bolt. Easy to install.
The 3/8" galvanized NUTS are INCLUDED. Galvanized coating gives protection from corrosion.
This CARRIAGE BOLTS 3/8-16 x 3-1/2": w/ NUTS Galvanized Carriage Bolt ~ Coarse Thread is a 100 PACK
Description
CARRIAGE BOLTS 3/8-16 x 3-1/2": w/ NUTS Galvanized Bulk Carriage Bolt ~ Coarse Thread. The tread pitch on these bolts is 16 (3/8-16) an everyday use 3/8" coarse thread carriage bolt. General use application. These ones are a gray looking galvanized bolt. Easy to install. The 3/8" galvanized NUTS are INCLUDED. Galvanized coating gives protection from corrosion. 100 PACK4. 3/8" x 12" Carriage Bolts with Nuts & Washers, 12 per Pack
Feature
Secure Property from Damage or Vandalism - Carriage bolts are a fast, easy way to board-up missing or broken windowsProtect Property Before a Storm - Use carriage bolts with plywood before a storm hits, to prevent window damage or vandalism
Premium Carriage Bolts - Zinc-plated steel carriage bolts are threaded for at least 3/4 of the length of the bolt
Bolt Ready to Use - Each carriage bolt includes a flat washer and nut
Multiple Bolts in Package - Sold as a package of 12 carriage bolts
Description
When you need to secure property quickly, you need carriage bolts. Used with durable plywood, carriage bolts are a fast, easy way to board-up windows after weather damage, vandalism or a robbery. Theyre also great for putting up plywood to protect windows before a storm hits. If youre short on time and need to do something fast, carriage bolts are a smart choice.
Our carriage bolts are available in three different sizes and they come with flat washers and nuts. We have these carriage bolts available in a package of 12.
5. Prime-Line 9063685 Carriage Bolts, 3/8 in.-16 X 2-1/2 in., A307 Grade A Hot Dip Galvanized Steel, 25-Pack
Feature
Size: 3/8 inch-16 X 2-1/2 inchFeatures a smooth rounded head as opposed to a standard hex head
Square shoulder allows for nut to be tightened or loosened
Often used in cases where a protruding bolt head could cause injury
Nuts and washers not included, ensure washers and nuts are same diameter
Description
Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason, they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases where it may be difficult to reach the bolt head with a tool. The square shoulder on carriage bolts help to hold it in place while the nut is fastened.6. 3/8"-16 x 6" Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers, Grade A, Full Thread, Quantity 25 - by Fastener Depot, LLC
Feature
Coarse ThreadSuperior Corrosion Resistance
Hot Dipped Galvanized Finish
Grade A
Full Thread
Description
Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way, where the square shoulder locks it firmly in place eliminating the need for a washer. Used whenever a smooth finish surface is needed so that nothing becomes snagged on the fastener. Galvanized finish allows for greater corrosion resistance.7. Prime-Line 9063780 Carriage Bolts, 3/8 in.-16 X 3-1/2 in., A307 Grade A Hot Dip Galvanized Steel, 25-Pack
Feature
Size: 3/8 inch-16 X 3-1/2 inchFeatures a smooth rounded head as opposed to a standard hex head
Square shoulder allows for nut to be tightened or loosened
Often used in cases where a protruding bolt head could cause injury
Nuts and washers not included, ensure washers and nuts are same diameter
Description
Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason, they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases where it may be difficult to reach the bolt head with a tool. The square shoulder on carriage bolts help to hold it in place while the nut is fastened.8. Hillman 812593 Hot Dipped Galvanized Carriage Bolt, 3/8 X 6-Inch, 50-Pack
Feature
Carriage bolts have a domed head that is not designed to be drivenThe flat-styled head allows for a smooth exterior finish
Hot Dipped Galavanized
Description
Carriage Bolts have a smooth, rounded head that has a small square section underneath. They are used in wood connections utilizing the square neck under the round head which will sit into the hole to prevent the head from turning. These carriage bolts come plated in zinc for moderate corrosion resistance.9. 150 pc 3/8x6" Carriage Bolts with nuts and washers
Feature
Elongated Hex under the head reduces stripping and drives easiertriple coated to outlast hot-dipped galvanized bolts
includes washers and nuts
Description
150 bolts, 150 washers, 150 nuts. All coated Green10. Hillman 812588 Hot Dipped Galvanized Carriage Bolt, 3/8 x 4-1/2-Inch, Silver, 50-Pack
Feature
Carriage Bolts are designed to fasten a wooden face to either wood or metalFlat head provides a semi-flush finish to applications
The heads is designed to eliminate the need for a washer
Square underside of the head is self locking to eliminate the need for a driving tool
Galvanized finish is perfect for rust prevention