If you looking for obd2 reader usb for ford then you are right place. We are searching for the best obd2 reader usb for ford on the market and analyze these products to provide you the best choice.
Best obd2 reader usb for ford
1. Launch CRP123 OBD2 Scanner Engine/ABS/SRS/Transmission Automotive Code Reader Diagnostic Scan Tool
Feature
THE WORLD'S SUPERIOR CAR SCANNER: LAUNCH CRP123 Featuring the unique and 3.5 TFT color display, the CRP 123 OBDII/EOBD code reader supports all 10 modes of OBDII test for a complete diagnosis. It is truly the ultimate in power and affordability , added benefits of read DataStream for 4 systems and vehicle diagnostic report. allowing users to do their jobs faster. Graph, Record, Replay data and troubleshooter code tips help users to save diagnosis and repair timeEXTENSIVE VEHICLE Coverage:Support four basic systems(ENG/TCM/ABS/SRS) for main stream models: Asian car models: Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Hyundai, Kia, Subaru, Infiniti, Lexus, Accura, Isuzu.USA car models: Ford, GM, Chrysler.European car models: Benz, BMW, VW, Opel, Volvo, Fiat, Landrover, Seat, Skoda, Audi,PEUGEOT,CITROEN,RENAULT,EUROFORD, Porsche, Saab, Jaguar .etc.
MAIN FUNCTION:Reads and clears codes on ENG/TCM/ABS/SRS. DLC location hints/ DTC help/ Data stream display in waveform;Retrieves generic (P0, P2,P3 and U0), manufacturer specific (P1, P3 and U1) codes, and pending codes;Easily determindes the cause of Check Engine Light;Turns off MIL, clears codes and resets monitors;Displays DTS definitions;Views freeze frame data;Displays monitor and I/M rediness status;Reads live PCM data stream,Displays live O2 sensor test data;
SPECIAL FUNCTION: Easily determindes the cause of Check Engine Light, Performs modules present test, Enhanced OBD II Mode 6, Retrieves vehicle information (VIN, CIN and CVN )
Warranty: 100% Money Back Guarantee; Life-Long time Free update Online ;hassle free 1-year replacement warranty with friendly and professional customer service
Description
Launch CRP123 Works with all vehicles compliant with EOBD/OBDII (from 1996 Year and Newer for US Vehicles).
The CRP123 amalgamates the best features of code scanners and professional mid-line scan tools. It opens up a whole world of diagnostics, which is further improved by its enhanced data streams for ABS, SRS, Transmission and Engine; which is available across a wide range of makes and models.
Features:
1.3.5 TFT color display, Higher resolution, sharper colors
2.Works on ALL 1996 and newer vehicles (OBDII& CAN)
3.Retrieves generic (P0, P2,P3 and U0), manufacturer specific (P1, P3 and U1) codes, and pending codes
4.Easily determindes the cause of Check Engine Light
5.Turns off MIL, clears codes and resets monitors
6.Displays DTS definitions on the 320*480 TFT corlor screen
7.Views freeze frame data
8.Displays monitor and I/M rediness status
9.Reads live PCM data stream
10.Displays live O2 sensor test data
11.Performs modules present test
12.Enhanced OBD II Mode 6
13.Graphs Display, Data Record& Replay and DTCs tips guide users to the root cause of trouble code faster,
14.saving diagnosing and repari time
15.Retrieves vehicle information (VIN, CIN and CVN )
16Support large extension memory card
17.Multilingual menus, DTC definitions- English, Chinese, etc
18.Extremely easy to use and highly reliable
19Internet upgradeable
20.Prints data via PC
Package List:
1pc x Launch Car Creader CRP123
1pc x OBDII cable (43.3inch length)
1pc x USB Cable
1pc x USB Sticker
1pc x User Manual
1pc x Carrying paper box
2. BlueDriver LSB2 Bluetooth Pro OBDII Scan Tool for iPhone & Android
Feature
The Professional OBD2 Diagnostic Scan Tool trusted by mechanics and developed by Professional Engineers in North AmericaOfficially licensed and certified for Apple and Android devices
The BlueDriver App and BlueDriver Sensor work exclusively with each other to ensure quality
As easy to use as a code reader with all the capabilities of an expensive handheld scan tool, plus the benefits of your smartphone or tablet (free app updates, portability, saving data, interactive graphing of live data)
Free vehicle-specific Repair Reports drawn from a database of over 6.6 million fixes verified by certified auto mechanics
Description
BlueDriver is a Professional Diagnostic Scan Tool. Read or clear trouble codes when the check engine light comes on. View a vehicle-specific Repair Report that contains info such as Code Definition, Possible Causes, and Reported Fixes, which can be emailed as a PDF.
Read and clear Enhanced codes (e.g. ABS, Airbag, Transmission, etc) on GM, Ford, Chrysler, Toyota, Nissan, BMW/Mini (more to come!)
To deliver the best experience, the BlueDriver Sensor and the free BlueDriver App (on iTunes and Google Play) are designed to work exclusively as a single tool.
Older negative reviews focus on charges to unlock features in the App. The only purchase you ever need to make is the BlueDriver sensor listed here. No in-app purchases or subscription fees.
BLUEDRIVER FEATURES- Read and Clear Codes
- Confirmed CEL Codes - all makes
- Pending CEL Codes - all makes
- Permanent CEL Codes - all makes
- Enhanced Codes (e.g. ABS, Airbag, Transmission, etc) for
- GM, Ford, Chrysler, Toyota, Nissan (available worldwide)
- BMW/Mini (available in North America)
- Repair Reports - Vehicle-specific for each DTC:
- Code Definition
- Possible Causes
- Reported Fixes
- Freeze Frame - Vehicle snapshot when a code is stored
- Smog Check
- Mode 6 - Advanced test results (like misfire counts)
- Live Data - Graph multiple PIDs or export log to a file
BLUEDRIVER SPECIFICATIONS- Supported Vehicles
- Works with all vehicles 1996 or newer (domestic and import)
- Supports all OBD2 protocols (including CAN)
- Supported Phones/Tablets
- Licensed to work with Apple iOS and Android
- Supported Hardware/Software
- The BlueDriver Sensor and free BlueDriver App are designed to work exclusively as a single tool
3. OHP Ford ELMconfig USB device 500kbit/s ELM327 compatible interface with MS-CAN switch for Forscan FoCCCus Mazda OBD2 diagnostics
Feature
OHP Ford ELMconfig USB device with constant speed 500kbit/sELM327 compatible interface with MS-CAN switch
For Forscan FoCCCus FF2 ELMconfig software - Instructions included
For all Fords and Mazdas since 1996 (cars and light trucks)
NB! Avoid low quality copies
Description
OHP Ford ELMconfig USB device with constant speed 500kbit/sELM327 compatible interface with MS-CAN switch
For Forscan FoCCCus FF2 ELMconfig software - Instructions included
For all Fords and Mazdas since 1996 (cars and light trucks)
Allows access to all modules (on supported models): engine, gearbox, ABS, Airbag, climate control etc
Code reading, erasing, live data
Allows all service procedures: Service reset, DFP force regeneretion etc
Allows component activation, ECU parameter modifications etc
Supported US models: Focus, Mondeo/Fusion, Kuga, S-Max, C-Max, Transit, Ranger, F150 etc.
NB! Does not work on heavy trucks.
Supported software:
Forscan
ELMconfig
FoCCCus
FF2
Supported operating systems: All Windows versions: XP, Vista, 7, 8, 10
4. AORRO ELM327 Scanner OBD2 USB Adapter ELMconfig Forscan FoCCCus Diagnostic Scan Tool with MS-Can/HS-Can Switch
Feature
Type: USB+Compact DiscConvient to use. Plug the OBD2 scanner in your car's OBD2 port, turn on your car, connect the computer with USB port. Then run the App which install via CD. Notice: Only works for personl computer.Design for PC UserFeatured with USB, ELM327 OBD2 scanner is the latest PC-based scan tool.It supports all OBD-II protocols and is dispatched with a number of compatible programs. The processor is an ELM327.The output protocol (connection to laptop) is USB. Supports DOS and Windows.
Realtime Data StreamQuickly send data to your windows laptop from your vehicle in real time.Read and clear trouble codes. Turn off the MIL ("Check Engine" light). Both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Smart Scanning Professional level diagnostics at a truly reasonable price. It efficiently analyzes and clears your vehicle's "Check Engine Light", as well as reading your car engine's diagnostic codes, and display real-time operating performance of the car, such as Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Intake Manifold Pressure, Oxygen sensor voltages/associated short term fuel trims and so on
Excellent CompatibilityCompatible with all Gasoline vehicles with 12V voltage in OBDII interface, which support all OBDII protocols. (Not support Hybrid or electric vehicles) Drivers and instructions included,for 32 /64 bite Windows,Easy to install. More infor please have a see the description
Description
Features:
Support FORD models open hidden function Focus Mondeo Kuga
MS-CAN support via toggle switch(MS-CAN / HS-CAN)
ELM327 USB has full support to Ford specific diagnostic protocol MS-CAN
Majority of modern Ford modules are accessible only through this protocol.
Support FORD models open hidden function.
Besides added functionality for Ford, this device works as normal OBD2/EOBD code reader on all supported vehicles.
Functions:
read/erase fault codes from ALL modules, including OBD2/EOBD
access modules on both HS-CAN and MS-CAN mode
read vehicle configuration
actuator tests
Live Data
injector coding
software updates
service procedures
force DPF regeneration
programming
coding
adaptations
Supported software:
ELMconfig
Forscan
FOCCCUS
FF2
5. Forscan ELM327 Scanner OBD2 USB ELMconfig FoCCCus Diagnostic Scan Tool with MS-Can/HS-Can Switch for Ford Mazda for Windows
Feature
Forscan ELM327 with stable Hardware V1.5, Support all OBD2 Protocols, this device works as normal OBD2/EOBD code reader on most supported vehicles.Ford ELMconfig USB device with Constant speed set to 500000 baud (500 kbit/s),Design with Switch : MS CAN bus and HS CAN bus mode.
Special Function: Add functionality for Ford cars, Even support hidden function for ford Focus Mondeo Kuga.(Hidden function Support car list: 2006-2016 classical for Focus , 2012-2015 new for Focus , 2013-2015 Kuga)
Powerful Softwares Compatible: FORScan, Elmconfig, FF2 and FoCCCus, Scanmaster plus more
Drivers and instructions included,for 32 /64 bite Windows,Easy to install.
Description
Forscan OBD2 USB scanner Functions:* Read/erase fault codes from ALL modules, including OBD2/EOBD
* Access modules on both HS-CAN and MS-CAN mode
* Read vehicle configuration, actuator tests
* Live Data: Air Flow Rate, Engine RPM, Vehicle Speed, Intake Air Temperature
* Injector coding, programming, coding, adaptations
* Service procedures
* Force DPF regeneration
* Oxygen Sensors
* Fuel System status
* Long /Short Term Fuel Trim
OBDII scan Tool Supported Software:
Forscan
ELMconfig
FoCCCus
FF2
Modified ELM327-Special for Ford/Mazda :
Please NOTE: many Ford and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.
ELM327 supports HS CAN from the stock, because for Ford HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.
6. bbfly-BF32302 USB modified FTDI chip OBD-II Scan Tool for Windows ELMconfig Forscan HS-CAN / MS-CAN Ford Mazda OBD2
Feature
The bbfly-BF32302 ELMconfig USB device with constant speed 500kbit/sThe bbfly-BF32302 compatible interface with MS-CAN switch
For Forscan FoCCCus FF2 ELMconfig software - Instructions included
For all Fords and Mazdas since 1996 (cars and light trucks)
Avoid low quality copies
Description
The bbfly-BF32302 ELMconfig USB device with constant speed 500kbit/sELM327 compatible interface with MS-CAN switch
For Forscan FoCCCus FF2 ELMconfig software - Instructions included
For all Fords and Mazdas since 1996 (cars and light trucks)
Allows access to all modules (on supported models): engine, gearbox, ABS, Airbag, climate control etc
Code reading, erasing, live data
Allows all service procedures: Service reset, DFP force regeneretion etc
Allows component activation, ECU parameter modifications etc
Supported US models: Focus, Mondeo/Fusion, Kuga, S-Max, C-Max, Transit, Ranger, F150 etc.
Does not work on heavy trucks.
Supported software:
Forscan
ELMconfig
FoCCCus
FF2
7. NEXPEAK OBD2 Scanner Orange-Black Color Display with Battery Test Function, 2.8" Car Diagnostic Scan Tool Vehicle Check Engine Light Analyzer
Feature
Professional OBD2 Scanner: NEXPEAK NX501 can quickly read & erase the engine codes and show code definitions, turn-off Malfunction Indicator Light (MIL), reset monitors. It is a perfect car diagnostic tool that you can instantly find out what caused the check-engine light to come on, and determine whether it's something that requires a trip to the auto shop, save your time and money, avoid blind maintenance.Powerful Compatibility: It supports all OBD2 protocols car with 16 PIN interface, including KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN, it's compatible with the vast majority of cars makes from 1996 and newer vehicles, including passenger cars, SUV, light trucks etc. It's a plug and play engine diagnostic code reader, no need extra Battery or apps installed.
NOT ONLY Full OBD2 Function: Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, read Dynamic Data stream and Vehicle Information, O2 Sensor Test, EVAP Test of Fuel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), the scanner can not only reveal what error codes your car is producing, but also check the battery voltage and help to determine whether your car battery need to be replaced or not.
BEST Stability and Performance: This NX501 OBD2 scan tool does all diagnosis via 2.8'' colorful LCD screen, features with newest software UI and best STM-32 main chip set, this auto code reader can perform diagnoses 2-3 times faster than other obd2 scanner, pretty easy to navigate using the accompanying keypad. The anti-shock and slip soft silicone material and artificial mechanical design, offer you a comfortable and enjoyable diagnostic experience.
Update & Warranty: The NX501 OBD2 scanner supports life-time free software update service, Built-in memory card allows you to store diagnostic data and print it out via computers (for Windows ONLY). The device comes with a portable case to easily carry /store the unit. 3 Years Warranty Guarantee with 100% refund if any issues.
Description
NEXPEAK NX501 OBD2 Scanner Code Reader Scan Tool
Product description
Full Engine Check Functions
1. Read engine fault codes and shows definitions.
2. Read DTCs
3.Clear DTCs
4. Read data stream
5. Turn off MIL and reset monitors
6. View freeze frame data
7. I/M readiness monitor status
8. Display O2 sensor test data
9. Read vehicle information
10. DTC lookup
11.Test data review
13. Internet upgradable
14. Full color 2.8'' LCD Display with extra long 5.5 ft Cable.
15. Lifetime Free update software.
Battery Check
SupportsReal-time Battery Monitoring, Displays the Voltage 24 Hours.
<10.8V (before Starting)--Too Low, change battery, otherwise, might not be able to start.
10.8V-11.8V (before starting)--Slightly Low, difficult to start, please turn off other electronics and start vehicle to charge.
11.8V-12.8V (before starting)--Normal.
12.8V-13.2V (after starting)--Too Low, might not be able to charge the battery, please check other electrical load.
13.2V-14.8V (after starting)--Normal.
>14.8V(after starting)--Too High, might damage the battery, please check the engine stabilizer.
Package includes
a.1 x NX501 Scan tool main unit
b.1 x User's Manual
c.1 x OBD2 cable
d.1 x USB cable
e.1 x High-grade protection bag
f.1 x High-grade gift box
8. Bafx Products - Wireless Bluetooth OBD2 / OBDII Diagnostic Car Scanner & Reader Tool for Android Devices - Read/Clear Your Check Engine Light & Much More
Feature
OUR GUARANTEE - We promise our OBDII reader to work on ALL vehicles purchased in the USA model year 1996 or newer! Unlike so many other cheaper OBD II readers that say they will work on vehicles using J1850 or CAN protocols, but don't, ours WILL work on these & we PROMISE that! Whether your vehicle is gas, diesel or hybrid, new or old, our OBD reader will work with it. Many people buy cheap first but always end up buying ours, because ours works!WARRANTY - 2 YEAR WARRANTY (YES, 2!) - Covers manufacturing defects from date of purchase. A simple & hassle-free warranty process with USA based support will leave your mind at ease so you can focus on your cars maintenance and health!
MONITOR & ANALYZER - The BAFX Products OBD Scanner is a must have tool for your car. With it you can read & clear your Check Engine Light (CEL) & check your vehicle monitors such as O2 Sensors, Fuel Trim, Air Fuel Ratio, DPF Temp, Coolant Temp, Oil Temp, Fuel Pressure & so much more! Professional level diagnostics at a truly reasonable price.
APPS & CAR BRANDS - You will need to use a 3rd party app with our scan tool. There are many apps available ranging in price from $0-$40 such as: Torque, Dash Command, Carista, Scan Master, Piston & more! Contact BAFX for a complete list. Regardless of your brand of vehicle our OBD reader will work! Chevy, Ford, BMW, Lexus, Toyota, Nissan, Subaru, Honda, Mercedes, GM, Dodge, Chrysler, Jeep & more, all covered!
IMPORTANT - You must have an Android or Windows based device to use our Bluetooth OBD2 reader. Our OBD reader CANNOT be used with iOS devices such as iPhones and the like. For iPhones & iPads, please look at our WiFi version! Also, this device will NOT read AirBag, ABS, TPMS or Oil Change lights. Our diagnostics tool will only read codes for the Check Engine Light.
Description
BEWARE OF IMITATORS! The BAFX Products Scan Tool works on ALL vehicles located in the USA that are model year 1996 or newer! We GUARANTEE IT! Many tools CLAIM to work on all vehicles but have problems with the J1850 & CAN protocols. Ours doesn't. Ours works on ALL protocols AND we actually mean it! People try the cheaper ones but then buy ours, because ours works. The BAFX Products adapter will: Last longer, have more stable connections, give faster data rates & work smoother on ALL vehicles compared to our competitors. We also provide TOP NOTCH support. Have a question? Problem? Let us know, we WILL answer or fix the problem. NOT COMPATIBLE WITH iOS DEVICES! To use the OBD reader you will need to install a 3rd party app from the Android Store or online. Apps range in price from $0 - $5 with specialty apps costing up to $60. PC programs range from $0 - $50. Contact BAFX Products for a list of apps When used with proper software, you can: Read OBDII Check Engine Light Codes Reset the CEL Pull MANY other sensor readings Graph sensor readings PREPARE FOR EMISSIONS TESTING And SO much more! 2 (Yes, TWO!) Year Warranty!* Problems beyond 2 years? Still, contact us! Examples of sensor readings: O2 Readings, EOT, EGT, Throttle, Boost, Speed, Fuel Trim, DPF Temp, Balance Rates & MUCH more! *NOTE! Not all vehicles support reading of ALL sensors. Readings supported depend on what's installed on the OBDII system by the manufacturer. Generally, newer vehicles will give more readings. IF NOT LOCATED IN THE USA: CONTACT US before ordering to ensure it will work in your country! We ONLY guarantee it will work on vehicles located in certain countries! *Warranty ONLY valid if purchased from BAFX Products or authorized dealer9. Innova Color Screen Light 3040e Diagnostic Code Reader/Scan Tool with ABS, Live Data and Oil Reset for OBD2 Vehicles
Feature
Read and erase "Check Engine" light warnings on any foreign or domestic 1996 and newer car, light truck, SUV, or HybridReset the Oil Service light on most 1996 and newer OBD2 vehicles
View Live Data in real time for more accurate troubleshooting and diagnosis
Read and erase ABS light trouble codes for most domestic vehicles
Battery/Alternator test checks the performance of a vehicle's battery and alternator
Description
A simple and advanced tool designed to empower any DIYer or technician when it comes to vehicle diagnostics and repair.10. Autel MaxiLink ML619 CAN OBD2 Scanner Code Reader +ABS/SRS Diagnostic Scan Tool, Turns off Engine Light (MIL) and ABS/SRS Warning Lights
Feature
EASY ABS/SRS DIAGNOSIS: The obd2 scanner diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Turns off Malfunction Indicator Light (MIL) and ABS/SRS warning lights, clears codEXTENSIVE VEHICLE COVERAGE: The scan tool works on most 1996 and newer vehicles (OBDII & CAN) including GM, Ford, Chrysler, Volvo, VW, BMW, Mercedes, Toyota, Honda, Nissan,Hyundai, Kia, Subaru, Mitsub
WIDE CODES DIAGNOSIS: The vehicle code reader retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes
GRAPH LIVE DATA DISPLAY: The diagnostic tool views freeze frame data; Reads, stores and playbacks live PCM data stream and live sensor data; Graphs data; Prints data via PC
FREE ONLINE UPDATE: The obdii scanner is Internet updatable and upgradable