Shopping for the best pvc tee 3/4 x 1 is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy pvc tee 3/4 x 1. Don’t worry any more! We spend many hours to review and compare pvc tee 3/4 x 1 to make the short list for you. Let’s check which product is suitable with you.
Best pvc tee 3/4 x 1
1. Spears 1401 Series PVC Tube Fitting, Tee, Schedule 40, Gray, 1" x 3/4" Barbed
Feature
Tee fitting with three openings for connecting and branching three flexible polyethylene tubesBarbed male insert on each end for connecting three flexible tubes
PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal
Maximum operating temperature of 140 degrees F
Meets ASTM D1784 and D2609 standards for quality assurance, and certified by NSF International for potable water service
Description
This Spears schedule 40 PVC tee fitting has barbed male inserts on each end, and is suitable for connecting and branching flexible polyethylene tubes. The barbed ends allow a quick connection to flexible tubing. The fitting is T-shaped and has three openings to connect and branch three tubes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Dimensions for tees are represented as A x B x C. A and B indicate the main run on the fitting, and C indicates the branch. The fitting is made of gray PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with SIDR-PR (standard inside dimension ratios, pressure rated) flexible polyethylene tubing according to ASTM International standard D2239, or standard D2104 schedule 40 polyethylene tubing. The fitting has a maximum operating temperature of 140 degrees F, meets ASTM International D1784 and D2609 standards for quality assurance, and is certified by National Sanitation Foundation International (NSF) for potable water service. This PVC tee fitting is suitable for connecting flexible polyethylene tubing for a range of liquid transfer applications.
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
2. NIBCO 401 Series PVC Pipe Fitting, Tee, Schedule 40, 1" x 3/4" x 1" Slip
Feature
Tee with three openings for connecting and branching three pipesSlip openings for connecting to male unthreaded pipes or fitting
PVC for corrosion resistance, high strength, and less weight than fittings made from metal
Smooth interior finish for reduced friction and material buildup
Meets specifications ASTM D2466 and D1784 for quality assurance
Description
The NIBCO 401 schedule 40 tee pipe fitting is made of PVC and has slip connections. This tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. "A" and "B" indicate the main run on the fitting, and "C" indicates the branch. It has female slip openings for sliding over the ends of male unthreaded pipes. The slip ends connect to pipes with a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. This fitting meets American Society for Testing and Materials (ASTM) D2466 and D1784 specifications for quality assurance.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
NIBCO manufactures flow-control products for construction, industrial, fire protection, and irrigation applications. The company, founded in 1904, is headquartered in Elkhart, IN, and meets International Organization for Standardization (ISO) 9001 standards for quality assurance.
3. 1" x 1" x 3/4" Socket PVC Reducer Tee Sched 40
Feature
Price For: Each Standards: NSF 61, NSF 14 Max. Temp.: 140 Degrees F Item: Reducer Tee Body Material: PVC Color: White Compliance: ASTM Fittings Sub-Category: Tees Schedule: 40 Connection Type: Socket x Socket x Socket Max. Pressure: 450 psi @ 73 Degrees F Pipe Size: 1" x 1" x 3/4" Length: 3.13" Country of Origin (subject to change): United StatesDescription
' Reducer Tee, Body Material PVC, Schedule 40, Pipe Size 1 In. x 1 In. x 3/4 In., Connection Type Socket x Socket x Socket, Max. Pressure 450 psi @ 73 Degrees F, Color White, Max. Temp. 140 Degrees F, Length 3.13 In., Standards NSF 61, NSF 14, Compliance ASTM '4. Spears 401-G Series PVC Pipe Fitting, Tee, Schedule 40, Gray, 1-1/4" x 1" x 3/4" Socket
Feature
Reducing tee with three ends for connecting and branching three pipes with different diametersSocket ends for connecting to unthreaded male pipes or fittings
PVC for corrosion resistance, high strength, and less weight than fittings made from metal
Smooth interior finish for reduced friction and material buildup
Meets NSF/ANSI 61 Annex G, NSF/ANSI 372 for quality assurance
Description
This Spears reducing tee pipe fitting, in gray, is made of schedule 40 PVC and has socket end connections. This fitting is T-shaped and has three ends to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. A and B indicate the main run on the fitting, and C indicates the branch. It has female socket connections for sliding over the ends of unthreaded male pipes. The socket end connects to pipes with a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for lead free plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January 2014. This reducing tee pipe fitting is suitable for use in cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
5. Drip Depot Dura PVC Schedule 40 Slip Reducing Tee 3/4" x 3/4" x 1" Fitting
Feature
Same Day Shipping (M-F to 5PM EST)100% Satisfaction Guarantee
Excellent Customer Service
Description
Use this Schedule 40 PVC Slip Reducing Tee when you need to connect different sizes of PVC pipe going in three different directions or branch off with a 90 lateral from a run of PVC pipe. Sizes are listed reading from left - right - center in tee formation. Slip connections require primer/glue.
6. 1" x 1" x 3/4" Insert PVC Reducing Tee
Feature
Price For: Each Max. Temp.: 140 Degrees F Body Material: PVC Color: Gray Fittings Sub-Category: Tees Standards: NSF 61, NSF 14, ASTM D1784 Length: 4.48" Connection Type: Insert Max. Pressure: 270 psi@73 Degrees F Pipe Size: 1" x 1" x 3/4" Item: Reducing Tee Country of Origin (subject to change): United StatesDescription
' Reducing Tee, Body Material PVC, Pipe Size 1 In. x 1 In. x 3/4 In., Connection Type Insert, Max. Pressure 270 psi@73 Degrees F, Color Gray, Max. Temp. 140 Degrees F, Length 4.48 In., Standards NSF 61, NSF 14, ASTM D1784 '7. LASCO 401-131BC 1" x 1" x 3/4" Slip Schedule 40 PVC Tee Fitting
Feature
Lasco 401-131BC 1" x 1" x 3/4" Slip Schedule 40 PVC Tee FittingDescription
This is a schedule 40 PVC tee fitting that is used in a variety of plumbing applications to allow you to make 3 connections.8. 1" FNPT x 3/4" Snap On PVC Saddle Tap Sched 40
Feature
Price For: Each Standards: ASTM D1784 Max. Temp.: 140 Degrees F Body Material: PVC Fittings Sub-Category: Tees Schedule: 40 Item: Snap On Saddle Tap Pipe Size: 1" x 3/4" Color: White Connection Type: FNPT x Snap On Country of Origin (subject to change): United StatesDescription
' Snap On Saddle Tap, Body Material PVC, Schedule 40, Pipe Size 1 In. x 3/4 In., Connection Type FNPT x Snap On, Color White, Max. Temp. 140 Degrees F, Standards ASTM D1784 '9. Spears 401 Series PVC Pipe Fitting, Tee, Schedule 40, White, 3/4" x 1" Socket
Feature
Tee with three openings for connecting and branching three pipesSlip openings for connecting to male unthreaded pipes or fitting
PVC for corrosion resistance, high strength, and less weight than fittings made from metal
Smooth interior finish for reduced friction and buildup of materials
Description
This Spears 401 series tee pipe fitting is made of schedule 40 PVC and has slip connections. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. "A" and "B" indicate the main run on the fitting, and "C" indicates the branch. It has female slip openings or "sockets" for sliding over the ends of male unthreaded pipes. The slip ends connect to pipes with a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This tee pipe fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.