Finding the best ice maker connector 1/2 to 1/4 suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best ice maker connector 1/2 to 1/4
1. Certified Appliance Accessories IM180SS Braided Stainless Steel Ice Maker Connector, 15-Foot
Feature
Braided stainless Steel ice maker connector1/4 inch fem. x 1/4 inch fcm
Upc, NSF/ANSI 61 & case certified Certified Appliance Accessories recommends installation of this product be performed by a licensed professional
15Ft
Braided stainless steel
1/4 -Inch Comp x 1/4-Inch Comp
Description
This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories makes ice maker connections a breeze. It has 1/4 in. FCM connectors on each end and is UPC, NSF/ANSI 61 and CSA certified. Certified Appliance Accessories(R) recommends installation of this product be performed by a licensed professional.2. SharkBite 24983A Service Tee Stop Valve, 1/2 Inch x 1/2 Inch x 1/4 Inch, 1/4 Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
Feature
It can be used on Copper, PEX, CPVC or PE-RT tubing.The SharkBite Tee Stop combines a SharkBite Push-to-Connect tee with a 1/4" Compression line and a quarter turn valve for easy on/off control of the supply line.
The Tee Stop also commonly serves as an alternative to a saddle valve.
The valve is easily rotated after assembly for easy installation, even in tight spaces.
This product is particularly useful for adding supply lines to fixtures such as dishwashers, humidifiers and ice makers.
Description
1/2" x 1/2" x 1/4", Service Tee Stop, Allows The User To Tap Into Existing Supply Lines To Add Fixtures & Appliances With The Speed & Convenience Of Push Fit Connections To The Final Phase Of Pluming Projects.3. SharkBite 23337-0000LFA Straight Stop Valve 1/2 inch x 1/4 inch, Compression Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
Feature
INSTALLS IN SECONDS: 1/2 inch push-fit x 1/4 inch, threaded compression straight shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight sealPERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
Description
SharkBite1/2" X 1/4" Compression Straight Stop Valve
We use high quality DZR Lead Free Brass for our 1/2 x 1/4 Quarter Turn Straight Stop Ball Valve. Chrome plated valve for an attractive appearance. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve.
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
4. TOTOMO 1/4"OD Push Fit Angle Stop Adapter Valve - Fits both 3/8" & 1/2" Under Sink Cold Water Supply Diverter for RO Water Purifier System, Coffe Brewer, Ice Maker
Feature
[Easy Installation] Push fit quick connect fiiting to 1/4" tubing[Fits on All Standard Under Sink Water Valves] With the included conversion adapter it fits both 1/2 inch NPT & 3/8 inch Comp water supply valve
[Safe & Sturdy] Lead free Polypropylene body construction and Sturdy nickel plated brass threads
[Hot & Cold] Suitable for use in hot and cold water applications
[Applications] RO (Reverse Osmosis) Water Filteration systems, Ice makers, Automatic Coffee Brewers, Beverage dispensing, RV and Marine, Misting Systems and many more.
5. 1/2" to 1/4" RO Feed Water Adapter Ball Valve Faucet Tap Feed Reverse Osmosis
Feature
Light Weight,Easy Install and unloadApplications: Apply to Reverse Osmosis Water System and Housing In Line Filters ETC
Tee union:1/2" Thread male x 1/2" thread female
Ball valve: 1/4 tube quick connect
Description
100% New,Never UsedEasy to load and unload
Applications: Apply to Reverse Osmosis Water System and Housing In Line Filters ETC
Tee union:1/2" Thread male x 1/2" thread female
Ball valve: 1/4 tube quick connect.
Material: Metal
Package Included: 1 x Water Adapter
6. John Guest ASVPP1LF Angle Stop Adapter Valve, Push-to-Connect, 3/8-Inch by 3/8-Inch by 1/4-Inch
Feature
Angle stop adapter valveDesigned for hot and cold water and radiant heating systems
Push fit fittings
Twist and lock for added security
No tools required
Description
Feed water valve. White polypropylene with food grade EPDM o-rings, connects between valve and riser to the main water supply line for application in reverse osmosis, filtration systems, automatic coffee brewers, and ice-makers. Not for use with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. Sizes indicated are thread male compression x thread female compression x tube OD.7. NEESHOW 1/4" Quick Connect Water Purifiers Tube Fittings for RO Water Reverse Osmosis System Pack Of 10Ball Valve+Y+L+I+T Type+5 meters15 feet tubing hose pipe for RO Water Reverse Osmosis System
Feature
Size: 1/4 inch ,Material: Polyethylene PlasticEasy to use,Mini quick connect push tee 1/4-Inch OD
Push fit fittings, fit all water filter systems and RO system
Prolong the service life of RO membrane,Flexible, easy to cut
Designed for use with the Stealth Reverse Osmosis Systems
Description
No tools required,Push fit fittingsEasy to use,Mini quick connect push tee 1/4-Inch OD
Push fit fittings,Quick Connect Fitting 1/4" RO Water System
Standard fitting for water filter systems using 6mm water filter tubing
Polyethelyne tubing for reverse osmosis and drinking water applications
8. SharkBite 25032 Ice Maker Outlet Box, 1/2-Inch SharkBite Push-to-Connect x 1/4-Inch Compression Ice Maker Water Valve
Feature
Contour box design allows easy valve access and operation.Quick, safe water supply and shut off for fridge ice maker and water dispenser.
Meets UPC, IPC and cUPC requirements.
Made of lead-free DZR brass for durability and reliability.
Recessed installation eliminates exposed Piping
Description
The SharkBite Ice Maker Connection Kit includes 1/4-inch compression valve fitted with 1/2-inch SharkBite connector to allow for quick and easy installation in residential kitchen spaces using Copper, PEX, CPVC or PE-RT water lines. Provides quick and safe water flow control for icemaker or refrigerator lines.9. Malida FBA_646455 Water Filter Float Ball Valve,or Fish Aquarium Uses 1/4 Inch Supply Tube.
Feature
Suitable for Reverse Osmosis System,Fish Aquarium,etcPVC for corrosion resistanceTop mounted
Float Ball Valve Shut off Uses 1/4" Supply Tube
Tank mount with extended threads on inlet side of valve for mounting through tank wall
PVC Mini Float Valve, Tank Mount, Adjustable Arm
Description
Plastic float valve automatically start and stop water flow.The float is adjustable to allow you to control the water height.
Estimated rate of flow up to 1.5 gpm at 60 psi
PVC for corrosion resistance
Tank mount with extended threads on inlet side of valve for mounting through tank wall
Includes 1x4" float ball attached to adjustable valve shutoff arm
1/4" Tube push inlet and free-flow outlet
10. Brasscraft 68-4-8X 1/4 OD by 1/2-Inch Male Reducing Adapter Lead-Free, Rough Brass
Feature
Brass Craft Compression Fittings do not require any flaring, soldering or other type of tubing preparationThis products adds a great value
This product is manufactured in United States
BrassCraft Compression Fittings do not require any flaring, soldering or other type of tubing preparation
Manufactured from brass rod
For use with potable water, instrumentation, hydraulic and pneumatic systems
Designed to be used with aluminum, copper and plastic tubing Not recommended for steel tubing Plastic tubing requires 63PT insert and 60PT sleeve
Lead-Free Compliant